sf::Texture applied in a wrong way

In my 2D isometric engine, I have the following classes :

`maps(variable)/layers(variable)/cubes(variable)/sides(6)/points(4)/coordinates(3)`

Each sides contains 4 points(1 point = 1 coordinate(x, y, z)).
Each cubes contains 6 sides.
I can create a map with the size i want with cubes(same, the size i want).

Folers:

assets/numTexture/numLight.png

I calcule with numTexture and numLight a number wich is the textureNumberEntry(i loaded all numLight.png(textures) in an array).

But texturing gones wrong:

I define my cubes coordinates in the layer class :

for(int J = 0; J < mapSize; J++)
{
    for(int I = 0; I < mapSize; I++)
    {
        x = (J - I) * (cubeSize/2);
        y = (J + I) * (cubeSize/4);

        c = new cube(cubeSize, x, y, z, I, J);
        cs.push_back(*c);
    }
}

In side.cpp, I have a switch on sideType(if it's the top, left, etc... I define differently my points' coordinates). I have 6 of them for each cubes(only data here) Like this :

    switch(typeSide)
        {
            case 0://DOWN_SIDE
                light = 0;

                tmp_x = x + (size/2);
                tmp_y = y + (size/2);
                p0 = new point(tmp_x, tmp_y, tmp_z);

                tmp_x = x + size;
                tmp_y = y + (3 * (size/4));
                p1 = new point(tmp_x, tmp_y, tmp_z);

                tmp_x = x + (size/2);
                tmp_y = y + size;
                p2 = new point(tmp_x, tmp_y, tmp_z);

                tmp_x = x;
                tmp_y = y + (3 * (size/4));
                p3 = new point(tmp_x, tmp_y, tmp_z);
                break;

//ETC. ....

And function display() to display the map:

void GRAPHICS_HANDLER::display()
{
    x = 0;
    y = 0;

    if(maps.size() > 0 && maps[0].layers().size() > 0)//If there is any map and layers to display
    {
        for(int l = 0; l <= getCurrentLayerID(); l++)//FOR EACH LAYER, WE STOP TO THE CURRENT EDITED LAYER
        {
            for(unsigned int c = 0; c < maps[currentMapID].layers()[l].cubes().size(); c++)//FOR EACH CUBES
            {
                if(maps[currentMapID].layers()[l].cubes()[c].getFlat())//If flat mode is enabled: to draw texture like grass, etc...(cf. screen): We draw only one side
                {
                    for(unsigned int p = 0; p < 4; p++)//FOR EACH POINTS
                    {
//--------------------------------------------------------------------------------------LOAD MAP-----------------------------------------------------------------------------------------------------------//
//--------------------------------------------------------------------------CUBE CLICK DETECTION::TEXTURE CHANGE--------------------------------------------------//
                        if(cubeClicked || brushMode && currentSelectedCube > -1 && currentSelectedCube < maps[currentMapID].layers()[maps[currentMapID].currentLayerId()].cubes().size())
                        {
                            maps[currentMapID].layers()[maps[currentMapID].currentLayerId()].cubes()[currentSelectedCube].setTexture(currentSelectedTexture);

                            if(!brushMode)
                                cubeClicked = false;
                        }
//--------------------------------------------------------------------------CUBE CLICK DETECTION::TEXTURE CHANGE--------------------------------------------------//
//--------------------------------------------------------------------------------------CURSOR - NOT WORKING-----------------------------------------------------------------------------------------------------------------//
                        //...
//--------------------------------------------------------------------------------------CURSOR - NOT WORKING-----------------------------------------------------------------------------------------------------------------*/

                        if(enableOffset)
                        {
                            x = maps[currentMapID].layers()[l].cubes()[c].sides()[0]->pointPosition(p)[0] + offsetLeft;//it's like doing something like point[p].x + offset left
                            y = maps[currentMapID].layers()[l].cubes()[c].sides()[0]->pointPosition(p)[1] + offsetTop;
                        }
                        else
                        {
                            x = maps[currentMapID].layers()[l].cubes()[c].sides()[0]->pointPosition(p)[0];//it's like doing something like point[p].x + offset left
                            y = maps[currentMapID].layers()[l].cubes()[c].sides()[0]->pointPosition(p)[1];
                        }

                        points[p].position = sf::Vector2f(x, y);
                        points[p].texCoords = sf::Vector2f(x, y);

//--------------------------------------------------------------------------------------GRID-----------------------------------------------------------------------------------------------------------------//
                        //GRID DISPLAY //MISS AN EDGE .
                        isoGrid[p].position = points[p].position;
                        isoGrid[p].color = sf::Color(195, 195, 195, gridOpacity);
//--------------------------------------------------------------------------------------GRID-----------------------------------------------------------------------------------------------------------------//

                        maps[currentMapID].layers()[l].cubes()[c].sides()[0]->setLight(5);
                        textureEntryNumber = (maps[currentMapID].layers()[l].cubes()[c].sides()[0]->getTexture() - 1) * 9 + (maps[currentMapID].layers()[l].cubes()[c].sides()[0]->getLight() - 1);//WRONG
//--------------------------------------------------------------------------------------GRID-----------------------------------------------------------------------------------------------------------------//
//--------------------------------------------------------------------------------------LOAD MAP-----------------------------------------------------------------------------------------------------------//
                    }
//--------------------------------------------------------------------------------------DISPLAY MAP-----------------------------------------------------------------------------------------------------------//
                    if(grid && maps[currentMapID].layers()[l].cubes()[c].sides()[0]->getTexture() <= 1)//IF GRID = TRUE OR TEXTURE LESS OR EQUAL TO 1 => DISPLAY GRID
                    {
                        if(l == maps[currentMapID].currentLayerId())
                        {
                            window->draw(isoGrid);
                        }
                    }
                    else if(maps[currentMapID].layers()[l].cubes()[c].sides()[0]->getTexture() > 1)//IF THERE IS ANY TEXTURE TO DISPLAY(>1) => DISPLAY TEXTURE
                    {
                        window->draw(points, &textures[textureEntryNumber]);
                    }
//--------------------------------------------------------------------------------------DISPLAY MAP-----------------------------------------------------------------------------------------------------------//
                }
                else
                {
                    for(unsigned int s = 0; s < 6; s++)//FOR EACH SIDES(side number will always be 6, no need to make this dynamic
                    {
                        for(unsigned int p = 0; p < 4; p++)//FOR EACH POINTS
                        {
//--------------------------------------------------------------------------------------LOAD MAP-----------------------------------------------------------------------------------------------------------//
//--------------------------------------------------------------------------CUBE CLICK DETECTION::TEXTURE CHANGE--------------------------------------------------//
                            if(cubeClicked || brushMode && currentSelectedCube > -1 && currentSelectedCube < maps[currentMapID].layers()[maps[currentMapID].currentLayerId()].cubes().size())
                            {
                                maps[currentMapID].layers()[maps[currentMapID].currentLayerId()].cubes()[currentSelectedCube].setTexture(currentSelectedTexture);

                                if(flatMode)
                                    maps[currentMapID].layers()[maps[currentMapID].currentLayerId()].cubes()[currentSelectedCube].setFlat(true);
                                else
                                    maps[currentMapID].layers()[maps[currentMapID].currentLayerId()].cubes()[currentSelectedCube].setFlat(false);


                                if(!brushMode)
                                    cubeClicked = false;
                            }
//--------------------------------------------------------------------------CUBE CLICK DETECTION::TEXTURE CHANGE--------------------------------------------------//
//--------------------------------------------------------------------------------------CURSOR - NOT WORKING-----------------------------------------------------------------------------------------------------------------//
                            //...
//--------------------------------------------------------------------------------------CURSOR - NOT WORKING-----------------------------------------------------------------------------------------------------------------*/

                            if(enableOffset)
                            {
                                x = maps[currentMapID].layers()[l].cubes()[c].sides()[s]->pointPosition(p)[0] + offsetLeft;//it's like doing something like point[p].x + offset left
                                y = maps[currentMapID].layers()[l].cubes()[c].sides()[s]->pointPosition(p)[1] + offsetTop;
                            }
                            else
                            {
                                x = maps[currentMapID].layers()[l].cubes()[c].sides()[s]->pointPosition(p)[0];//it's like doing something like point[p].x + offset left
                                y = maps[currentMapID].layers()[l].cubes()[c].sides()[s]->pointPosition(p)[1];
                            }

                            points[p].position = sf::Vector2f(x, y);
                            points[p].texCoords = sf::Vector2f(x, y);

//--------------------------------------------------------------------------------------GRID-----------------------------------------------------------------------------------------------------------------//
                            //GRID DISPLAY //MISS AN EDGE
                            if(s ==3)
                            {
                                isoGrid[p].position = points[p].position;
                                isoGrid[p].color = sf::Color(195, 195, 195, gridOpacity);
                            }
//--------------------------------------------------------------------------------------GRID-----------------------------------------------------------------------------------------------------------------//

                            textureEntryNumber = (maps[currentMapID].layers()[l].cubes()[c].sides()[s]->getTexture() - 1) * 9 + (maps[currentMapID].layers()[l].cubes()[c].sides()[s]->getLight() - 1);//WRONG
//--------------------------------------------------------------------------------------GRID-----------------------------------------------------------------------------------------------------------------//
//--------------------------------------------------------------------------------------LOAD MAP-----------------------------------------------------------------------------------------------------------//
                        }
//--------------------------------------------------------------------------------------DISPLAY MAP-----------------------------------------------------------------------------------------------------------//
                        if(grid && maps[currentMapID].layers()[l].cubes()[c].sides()[s]->getTexture() <= 1)//IF GRID = TRUE OR TEXTURE LESS OR EQUAL TO 1 => DISPLAY GRID
                        {
                            if(l == maps[currentMapID].currentLayerId())
                            {
                                window->draw(isoGrid);
                            }
                        }
                        else if(maps[currentMapID].layers()[l].cubes()[c].sides()[s]->getTexture() > 1)//IF THERE IS ANY TEXTURE TO DISPLAY(>1) => DISPLAY TEXTURE
                        {
                            window->draw(points, &textures[textureEntryNumber]);
                        }
//--------------------------------------------------------------------------------------DISPLAY MAP-----------------------------------------------------------------------------------------------------------//
                    }
                }
            }
        }
    }

    window->display();
}

Scroll this one to see comments, and the labels

Problems:

Texture enlarged only when texture with details, no problem with one color texture(probably the vertex bouding together, even from different sf::VertexArray.

Note: class like maps/layers/cubes/etc. ... are only data.

Textures(numLIght) images which should be displayed in the screen look like this:

EDIT: Textures work when the picture is only a color, without details :

I don't know anymore what's wrong with my code. Maybe, i'll recode the function display()...

标签： c++ textures sfml isometric

1条回答

老娘就宠你

2楼-- · 2019-03-25 02:18

It looks like the texture coordinates might be outside of the texture.

If the pointPosition function refers to the p0, p1, p2, and p3 points in side.cpp, then it also looks like you're using those points as texture coordinates.

Consider how you would might create a 2D square-

//Create a VertexArray as quads.
sf::VertexArray vertices;
vertices.setPrimitiveType(sf::Quads);
vertices.resize(4);

//The square position values (same as sf::Vertex::position).
sf::Vector2f v0 = sf::Vector2f(10,  10);
sf::Vector2f v1 = sf::Vector2f(200, 10);
sf::Vector2f v2 = sf::Vector2f(200, 200);
sf::Vector2f v3 = sf::Vector2f(10,  200);

//The texture coordinates (same as sf::Vertex::texCoords).
sf::Vector2f tv0 = sf::Vector2f(0,                 0              );
sf::Vector2f tv1 = sf::Vector2f(0+tex.getSize().x, 0              );
sf::Vector2f tv2 = sf::Vector2f(0+tex.getSize().x, tex.getSize().y);
sf::Vector2f tv3 = sf::Vector2f(0,                 tex.getSize().y);

//Put them in vertices.
vertices[0] = sf::Vertex(v0,tv0);
vertices[1] = sf::Vertex(v1,tv1);
vertices[2] = sf::Vertex(v2,tv2);
vertices[3] = sf::Vertex(v3,tv3);

The square points don't have to be the same as the texture coordinates, since the texture coordinates will stretch to each square point. If you were to change a point in one of the square points, it may look like this.

BEFORE

AFTER (v2 changed to 200,300)

We don't need to change the texture coordinates at all, just the vertex positions.

I'm not sure if that's exactly what's going on here since I can't see what pointPosition is, but it's my best guess.

Also, trying to draw outside of a texture can result in it looking like the border pixels of the image are stretched (possibly what's happening in your example), and sometimes you can even display data from other information in video memory as a result of going beyond your texture's memory.

0人赞添加讨论(0) 举报

sf::Texture applied in a wrong way

采纳回答

编辑标签

举报内容

检举类型

检举原因

检举说明(必填)

打开微信“扫一扫”，打开网页后点击屏幕右上角分享按钮

付费偷看金额在0.1-10元之间