different CPU cache size reported by /sys/device/

Question

I'm trying to get the size of different cache level in my system.

I tried two techniques.

a) Using information from /sys/device. Here is the output.

$ cat /sys/devices/system/cpu/cpu0/cache/index1/size
32K
$ cat /sys/devices/system/cpu/cpu0/cache/index2/size
256K
$ cat /sys/devices/system/cpu/cpu0/cache/index3/size
8192K

b) Using information from dmidecode

$ sudo dmidecode -t cache
Cache Information
    Socket Designation: CPU Internal L1
    Configuration: Enabled, Not Socketed, Level 1
    Operational Mode: Write Through
    Location: Internal
    Installed Size: 256 KB
    Maximum Size: 256 KB
        < .... >
Cache Information
    Socket Designation: CPU Internal L2
    Configuration: Enabled, Not Socketed, Level 2
    Operational Mode: Write Through
    Location: Internal
    Installed Size: 1024 KB
    Maximum Size: 1024 KB
        < .... >
Cache Information
    Socket Designation: CPU Internal L3
    Configuration: Enabled, Not Socketed, Level 3
    Operational Mode: Write Back
    Location: Internal
    Installed Size: 8192 KB
    Maximum Size: 8192 KB
        < .... >

The size reported for L2 and L3 cache is different. Any ideas as to a) why this discrepancy? b) Which method gives the correct value?

Other related information:

$uname -a
Linux 3.0.0-14-generic #23somerville3-Ubuntu SMP Mon Dec 12 09:20:18 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

cat /proc/cpuinfo 
processor   : 0
vendor_id   : GenuineIntel
cpu family  : 6
model       : 58
model name  : Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
stepping    : 9
cpu MHz     : 2400.000
cache size  : 8192 KB
physical id : 0
siblings    : 8
core id     : 0
cpu cores   : 4
apicid      : 0
initial apicid  : 0
fpu     : yes
fpu_exception   : yes
cpuid level : 13
wp      : yes
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 x2apic popcnt aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms
bogomips    : 6784.23
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:
< ... >

Answer 1

A few things:

1. You have a quad-core CPU
2. The index<n> name in /sys/devices/system/cpu/cpu<n>/cache does not correspond to L1/L2/L3 etc. There is a .../index<n>/level file that will tell you the level of the cache.
3. Your L1 cache is split into two caches (likely index0 and index1), one for data, and one for instructions (see .../index<n>/type), per core. 4 cores * 2 halves * 32K matches the 256K that dmidecode reports.
4. The L2 cache is split per-core. 4 cores * 256K (from index2) = 1024K, which matches dmidecodes L2 number.