Is it possible to embed and execute VBScript withi

Question

People have been embedding and executing VBScript within batch files for a long time. But all the published solutions that I have seen (at the time this question was originally posed) involve writing a temporary VBS file. For example: Embed VBScript inside Windows batch file.

Is it possible to execute embedded VBScript within batch without writing a temporary file?

Answer 1

EDIT: My first answer was wrong for VBScript, now my next try...

Nice idea to use CTRL-Z, but I don't like control characters in a batch file, as it is problematic to copy&paste them.
It's depends of your browser, of your editor, of your ...

You could get a hybrid VBScript/Batch also with normal characters, and "normal" code.

:'VBS/Batch Hybrid
:
:
:'Makes the next line only visible for VBScript ^
a=1_
<1' echo off <nul 

set n=nothing' & goto :'batchCode & REM Jump to the batch code

'VBScript-Part
wscript.echo "VB-Start"
wscript.echo "vb-End"
wscript.quit(0)

'Batch part
:'batchCode
set n=n'& echo Batch-Start
set n=n'& echo two
set n=n'& echo Batch-End
set n=n'& cscript /nologo /E:vbscript vbTest.bat

The trick is to prepend each batch line with set n=n'& it is legal for both, but vbs will ignore the rest of the line, only batch will execute the rest of the line.

The other variant is :'remark ^, this is a remark for both, but for batch this remarks also the next line by the multiline character.
The VbScript sees then a=1<1 the rest of the line is a remark '
The batch sees only <1' echo off <nul, the first redirect from 1' will be override by the second <nul, so it results to only echo off < nul.

The only remaining problem is that you can see the first echo off, as it doesn't work in batch to use the @ after a redirection.

For JScript exists a simpler solution hybrid scripting

Answer 2

I have tried to assemble all solutions in one script at http://www.dostips.com/forum/viewtopic.php?p=37780#p37780.

There is the batch script converting the most popular languages into a batch file (.js, .vbs, .ps1, .wsf, .hta and historical .pl).

It works as follows:

    :: convert filename1.vbs to executable filename1.bat
    cmdize.bat filename1.vbs

Answer 3

And my attempt (first posted here).It resembles the jeb's solution ,but (at least according to me) the code is more readable:

:sub echo(str) :end sub
echo off
'>nul 2>&1|| copy /Y %windir%\System32\doskey.exe %windir%\System32\'.exe >nul

'& echo/ 
'& cscript /nologo /E:vbscript %~f0
'& echo/
'& echo BATCH: Translation is at best an ECHO.
'& echo/
'& pause
'& rem del /q "%windir%\System32\'.exe"
'& exit /b

WScript.Echo "VBScript: Remorse is the ECHO of a lost virtue."
WScript.Quit

And the explanation:

1. ' (single quote) is not forbidden symbol as a part of a file name in windows so there is no problem to have a file called '.exe
2. There are few commands packed with windows that do nothing without command line parameters.The fastest (at doing nothing) and most light as a size (according to my tests) are subst.exe and doskey.exe
3. So at the first line I'm coping the doskey.exe to '.exe (if it does not already exist) and then continue using it as '& (as the .exe extension should be in %PATHEXT%).This will be taken as a comment in VBScript and in batch will do nothing - just will continue with the next command on the line.

There are some flaws of course .At least for the first run eventually you will need administrator permissions as the coping in %windir%\System32\ might be denied.For robustness you can also use '>nul 2>&1|| copy /Y %windir%\System32\doskey.exe .\'.exe >nul and then at the end: '& rem del /q .\'.exe

With '.exe left in your path you could unintentially to use it in improper way , and the execution on every line of '.exe eventually could decrease the performance.

..And in the batch part commands must be only in one line.

Update 9.10.13 (..following the above convention)

Here's one more way which requires self-renaming of the batch file:

@echo off
goto :skip_xml_comment
<!--
:skip_xml_comment

echo(
echo Echo from the batch
echo(

( ren %0 %0.wsf 
 cscript %0.wsf 
 ren %0.wsf %0 )


exit /b 0
-->

<package>
   <job id="vbs">
      <script language="VBScript">

         WScript.Echo "Echo from the VBS"

      </script>
   </job>
</package>

And a short explanation:

1. When the batch is self-renamed and renamed again with the old name , and this is done in one line (or in brackets) the script will be executed with no errors.In this case is added also one call of CSCRIPT.EXE with .WSF file.Self-renaming is a little bit risky , but faster than a temp file.
2. Windows script host does not care much for items outside of xml data as long as there are no special xml symbols & < > ; so @echo off and goto can be used without worries. But for safety it's good to put batch commands in xml comment (or CDATA ) section .To avoid error messages from the batch I've skipped the <!-- with goto here.
3. Before closing the xml comment batch script is terminated with exit

So the good things are that there's no need to write all batch code in single line commands, there's no annoying echo off displayed , jscript code and different jobs could be added to the script.Also no need of special symbols and creation of additional exe files like '.exe

On the other hand self-renaming could be risky.

Answer 4

Note - jump to the UPDATE 2014-04-27 section at the bottom of this answer for the best solution.

I used to think the answer was no. But then DosTips user Liviu discovered that the <SUB> character (Ctrl-Z, 0x1A, decimal 26) has bizare effects when embedded within a batch file. If functions somewhat like a line terminator such that it is possible for batch commands that follow a REM (or a :: remark hack) to execute if they are preceded by Ctrl-Z. http://www.dostips.com/forum/viewtopic.php?p=13160#p13160

This has been confirmed on XP Home Edition sp3, Vista Home Premium sp2 64 bit, and Vista Enterprise sp2 32 bit. I'm assuming it works on other Windows versions.

Note - the code below is supposed to have embedded Ctrl-Z characters. I swear I used to see them on this site when viewed with IE8. But they seem to have been lost from this post somehow and I cannot figure out how to post them anymore. I've replaced the characters with the string <SUB>

::<sub>echo This will execute in batch, but it will fail as vbs.
rem<SUB>echo This will execute in batch, and it is also a valid vbs comment
::'<SUB>echo This will execute in batch and it is also a valid vbs comment

That is the key to a successful batch/vbs hybrid. As long as each batch command is preceded by rem<SUB> or ::'<SUB>, then the vbs engine won't see it, but the batch command will run. Just make sure you terminate the batch portion with an EXIT or EXIT /B. Then the remainder of the script can be normal looking vbs.

You can even have a batch label if needed. :'Label is both a valid vbs comment and a valid batch label.

Here is a trivial hybrid script. (again with <SUB> in place of embedded Ctrl-Z char)

::'<SUB>@cscript //nologo //e:vbscript "%~f0" & exit /b
WScript.Echo "Example of a hybrid VBS / batch file"

Update 2012-04-15

jeb found a solution that avoids the awkward CTRL-Z, but it prints out ECHO OFF at the start and also sets some extraneous variables.

I have found a solution without CTRL-Z that eliminates the extraneous variables and is simpler to comprehend.

Normally the special characters &, |, <, > etc. don't work after a REM statement in batch. But the special characters do work after REM.. I found this nugget of information at http://www.dostips.com/forum/viewtopic.php?p=3500#p3500. A test shows that REM. is still a valid VBS comment. EDIT - based on jeb's comment, it is safer to use REM^ (there is a space after the caret).

So here is a trivial VBS/batch hybrid using REM^ &. The only drawback is it prints REM & at the beginning, whereas jeb's solution prints ECHO OFF.

rem^ &@cscript //nologo //e:vbscript "%~f0" & exit /b
WScript.Echo "Example of a hybrid VBS / batch file"

Here is another trivial example that demonstrates multiple batch commands, including a CALL to a labeled sub-routine.

::' VBS/Batch Hybrid

::' --- Batch portion ---------
rem^ &@echo off
rem^ &call :'sub
rem^ &exit /b

:'sub
rem^ &echo begin batch
rem^ &cscript //nologo //e:vbscript "%~f0"
rem^ &echo end batch
rem^ &exit /b

'----- VBS portion ------------
wscript.echo "begin VBS"
wscript.echo "end VBS"
'wscript.quit(0)

I still like the CTRL-Z solution because it eliminates all extraneous output.

UPDATE 2012-12-17

Tom Lavedas posted a method to conveniently run dynamic VBS from a batch script over at Google Groups: No file VBS hybrid scripting. The method uses mshta.exe (Microsoft HTML Application Host).

His original batch solution relied on an external small VBS.BAT script to execute the VBS within a FOR /F. I modified the syntax slightly to make it convenient to embed directly within any given batch script.

It is quite slow, but very convenient. It is restricted to executing a single line of VBS.

The VBS is written normally, except all quotes must be doubled: A quote enclosing a string must be written as "", and quotes internal to a string must be written as """". Normally the mini script is executed within the IN() clause of a FOR /F. It can be executed directly, but only if stdout has been redirected or piped.

It should work on any Windows OS from XP onward as long as IE is installed.

@echo off
setlocal
:: Define simple batch "macros" to implement VBS within batch
set "vbsBegin=mshta vbscript:Execute("createobject(""scripting.filesystemobject"")"
set "vbsBegin=%vbsBegin%.GetStandardStream(1).write("
set ^"vbsEnd=):close"^)"

:: Get yesterday's date
for /f %%Y in ('%vbsBegin% date-1 %vbsEnd%') do set Yesterday=%%Y
set Yesterday
pause
echo(

:: Get pi
for /f %%P in ('%vbsBegin% 4*atn(1) %vbsEnd%') do set PI=%%P
set PI
pause
echo(

set "var=name=value"
echo Before - %var%
:: Replace =
for /f "delims=" %%S in (
  '%vbsBegin% replace(""%var%"",""="","": "") %vbsEnd%'
) do set "var=%%S"
echo After  - %var%
pause
echo(

echo Extended ASCII:
for /l %%N in (0,1,255) do (

  %=  Get extended ASCII char, except can't work for 0x00, 0x0A.  =%
  %=  Quotes are only needed for 0x0D                             =%
  %=    Enclosing string quote must be coded as ""                =%
  %=    Internal string quote must be coded as """"               =%
  for /f delims^=^ eol^= %%C in (
    '%vbsBegin% """"""""+chr(%%N)+"""""""" %vbsEnd%'
  ) do set "char.%%N=%%~C"

  %=  Display result  =%
  if defined char.%%N (
    setlocal enableDelayedExpansion
    echo(   %%N: [ !char.%%N! ]
    endlocal
  ) else echo(   %%N: Doesn't work :(
)
pause
echo(

:: Executing the mini VBS script directly like the commented code below 
:: will not work because mshta fails unless stdout has been redirected
:: or piped.
::
::    %vbsBegin% ""Hello world"" %vbsEnd%
::

:: But this works because output has been piped
%vbsBegin% ""Hello world"" %vbsEnd% | findstr "^"
pause

UPDATE 2014-04-27

Over at DosTips there is a great compendium of js/vbs/html/hta hybrids and chimeras in cmd/bat. Lots of good stuff from various people.

Within that thread, DosTips user Liviu discovered a beautiful VBS/batch hybrid solution that uses WSF.

<!-- : Begin batch script
@echo off
cscript //nologo "%~f0?.wsf"
exit /b

----- Begin wsf script --->
<job><script language="VBScript">
  WScript.Echo "VBScript output called by batch"
</script></job>

I think this solution is fantastic. The batch and WSF sections are clearly separated by nice headers. The batch code is absolutely normal, without any odd syntax. The only restriction is the batch code cannot contain -->.

Similarly, the VBS code within WSF is absolutely normal. The only restriction is the VBS code cannot contain </script>.

The only risk is the undocumented use of "%~f0?.wsf" as the script to load. Somehow the parser properly finds and loads the running .BAT script "%~f0", and the ?.wsf suffix mysteriously instructs CSCRIPT to interpret the script as WSF. Hopefully MicroSoft will never disable that "feature".

Since the solution uses WSF, the batch script can contain any number of independent VBS, JScript, or other jobs that can be selectively called. Each job can even utilize multiple languages.

<!-- : Begin batch script
@echo off
echo batch output
cscript //nologo "%~f0?.wsf" //job:JS
cscript //nologo "%~f0?.wsf" //job:VBS
exit /b

----- Begin wsf script --->
<package>
  <job id="JS">
    <script language="VBScript">
      sub vbsEcho()
        WScript.Echo "VBScript output called by JScript called by batch"
      end sub
    </script>
    <script language="JScript">
      WScript.Echo("JScript output called by batch");
      vbsEcho();
    </script>
  </job>
  <job id="VBS">
    <script language="JScript">
      function jsEcho() {
        WScript.Echo("JScript output called by VBScript called by batch");
      }
    </script>
    <script language="VBScript">
      WScript.Echo "VBScript output called by batch"
      call jsEcho
    </script>
  </job>
</package>

Answer 5

There is a very simple solution for this problem. Just use an Alternate Data Stream (ADS) to store the VBS code. To explain it simply, an ADS is another place where you can store other data in the same file, that is, a file is comprised of its original data plus any number of additional ADS's. Each ADS is identified separating its own name from the original file name via a colon. For example:

test.bat                    <- a file called "test.bat"
test.bat:script_.vbs        <- an ADS of file "test.bat" called "script_.vbs"

You may find a more technicall and extensive description of ADS's in the web, but it is important to mention now that this feature works on NTFS disks only. Now, lets see how use this feature to solve this particular problem.

First, create the original Batch file in the usual way. You may also start notepad.exe from the command line this way:

notepad test.bat

For my example, I inserted the following lines in test.bat:

@echo off
setlocal

For /f "delims=" %%i in ('Cscript //nologo "test.bat:script_.vbs" "Select a folder"') do Set "folder=%%i"

echo Result: "%folder%"

Note the name of the VBS script. After test.bat was saved and Notepad closed, create the VBS script using Notepad, so enter this command at the command-line:

notepad test.bat:script_.vbs

And create the script in the usual way:

Dim objFolder, objShell
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.BrowseForFolder(0, "Select a folder.", &H4000, 0)
If Not (objFolder Is Nothing) Then
   wscript.echo objFolder.Self.path
Else
   wscript.echo 0
End If

Save this file and run test.bat. It works! ;)

You may review the ADS's of test.bat file via the /R switch in dir command. You may read a more extensive explanation of this method and its limitations at this post.