How to write a video encoder with ffmpeg that expl

Question

I want to write an encoder with ffmpeg which can put iFrames (keyframes) at positions I want. Where can I found tutorials or reference material for it?

P.S
Is it possible to do this with mencoder or any opensource encoder. I want to encode H263 file. I am writing under & for linux.

Answer 1

An up-to-date version of api-example.c can be found at http://ffmpeg.org/doxygen/trunk/doc_2examples_2decoding_encoding_8c-example.html

It does the entire video encoding in a single and relatively short function. So this is probably a good place to start. Compile and run it. And then start modifying it until it does what you want.

It also has audio encoding and audio & video decoding examples.

Answer 2

You'll need to look at the libavcodec documentation - specifically, at avcodec_encode_video(). I found that the best available documentation is in the ffmpeg header files and the API sample source code that's provided with the ffmpeg source. Specifically, look at libavcodec/api-example.c or even ffmpeg.c.

To force an I frame, you'll need to set the pict_type member of the picture you're encoding to 1: 1 is an I frame, 2 is a P frame, and I don't remember what's the code for a B frame off the top of my head... Also, the key_frame member needs to be set to 1.

Some introductory material is available here and here, but I don't really know how good it is.

You'll need to be careful how you allocate the frame objects that the API calls require. api-example.c is your best bet as far as that goes, in my opinion. Look for the function video_encode_example() - it's concise and illustrates all the important things you need to worry about - pay special attention to the second call to avcodec_encode_video() that passes a NULL picture argument - it's required to get the last frames of video since MPEG video is encoded out of sequence and you may end up with a delay of a few frames.

Answer 3

GStreamer has decent documentation, has bindings for a number of languages (although the native API is C), and supports any video format you can find plugins for, including H.263 via gstreamer-ffmpeg.

Answer 4

you will need libavcodec library, For the first step I think you can learn about its use in ffplay.c file inside ffmpeg source code. It would tell you a lot. You can check my project also about video at rtstegvideo.sourceforge.net.

Hope this help.

Answer 5

If you're Java programmer then use Xuggler.

Answer 6

Minimal runnable example on FFmpeg 2.7

Based on Ori Pessach's answer, below is a minimal example that generates frames of form.

• I
• P
• B
• P
• ...

The key parts of the code that control frame type are:

c = avcodec_alloc_context3(codec);
/* Minimal distance of I-frames. This is the maximum value allowed,
or else we get a warning at runtime. */
c->keyint_min = 600;
/* Or else it defaults to 0 b-frames are not allowed. */
c->max_b_frames = 1;

and:

frame->key_frame = 0;
switch (frame->pts % 4) {
    case 0:
        frame->key_frame = 1;
        frame->pict_type = AV_PICTURE_TYPE_I;
    break;
    case 1:
    case 3:
        frame->pict_type = AV_PICTURE_TYPE_P;
    break;
    case 2:
        frame->pict_type = AV_PICTURE_TYPE_B;
    break;
}

We can then verify the frame type with:

ffprobe -select_streams v \
    -show_frames \
    -show_entries frame=pict_type \
    -of csv \
    tmp.h264

as mentioned at: https://superuser.com/questions/885452/extracting-the-index-of-key-frames-from-a-video-using-ffmpeg

Some rules were enforced by FFmpeg even if I try to overcome them:

• the first frame is an I-frame
• cannot place a B0frame before an I-frame (TODO why?)

Preview of generated output.

#include <libavcodec/avcodec.h>
#include <libavutil/imgutils.h>
#include <libavutil/opt.h>
#include <libswscale/swscale.h>

static AVCodecContext *c = NULL;
static AVFrame *frame;
static AVPacket pkt;
static FILE *file;
struct SwsContext *sws_context = NULL;

/*
Convert RGB24 array to YUV. Save directly to the `frame`,
modifying its `data` and `linesize` fields
*/
static void ffmpeg_encoder_set_frame_yuv_from_rgb(uint8_t *rgb) {
    const int in_linesize[1] = { 3 * c->width };
    sws_context = sws_getCachedContext(sws_context,
            c->width, c->height, AV_PIX_FMT_RGB24,
            c->width, c->height, AV_PIX_FMT_YUV420P,
            0, 0, 0, 0);
    sws_scale(sws_context, (const uint8_t * const *)&rgb, in_linesize, 0,
            c->height, frame->data, frame->linesize);
}

/*
Generate 2 different images with four colored rectangles, each 25 frames long:

Image 1:

    black | red
    ------+-----
    green | blue

Image 2:

    yellow | red
    -------+-----
    green  | white
*/
uint8_t* generate_rgb(int width, int height, int pts, uint8_t *rgb) {
    int x, y, cur;
    rgb = realloc(rgb, 3 * sizeof(uint8_t) * height * width);
    for (y = 0; y < height; y++) {
        for (x = 0; x < width; x++) {
            cur = 3 * (y * width + x);
            rgb[cur + 0] = 0;
            rgb[cur + 1] = 0;
            rgb[cur + 2] = 0;
            if ((frame->pts / 25) % 2 == 0) {
                if (y < height / 2) {
                    if (x < width / 2) {
                        /* Black. */
                    } else {
                        rgb[cur + 0] = 255;
                    }
                } else {
                    if (x < width / 2) {
                        rgb[cur + 1] = 255;
                    } else {
                        rgb[cur + 2] = 255;
                    }
                }
            } else {
                if (y < height / 2) {
                    rgb[cur + 0] = 255;
                    if (x < width / 2) {
                        rgb[cur + 1] = 255;
                    } else {
                        rgb[cur + 2] = 255;
                    }
                } else {
                    if (x < width / 2) {
                        rgb[cur + 1] = 255;
                        rgb[cur + 2] = 255;
                    } else {
                        rgb[cur + 0] = 255;
                        rgb[cur + 1] = 255;
                        rgb[cur + 2] = 255;
                    }
                }
            }
        }
    }
    return rgb;
}

/* Allocate resources and write header data to the output file. */
void ffmpeg_encoder_start(const char *filename, int codec_id, int fps, int width, int height) {
    AVCodec *codec;
    int ret;
    codec = avcodec_find_encoder(codec_id);
    if (!codec) {
        fprintf(stderr, "Codec not found\n");
        exit(1);
    }
    c = avcodec_alloc_context3(codec);
    if (!c) {
        fprintf(stderr, "Could not allocate video codec context\n");
        exit(1);
    }
    c->bit_rate = 400000;
    c->width = width;
    c->height = height;
    c->time_base.num = 1;
    c->time_base.den = fps;
    /* I, P, B frame placement parameters. */
    c->gop_size = 600;
    c->max_b_frames = 1;
    c->keyint_min = 600;
    c->pix_fmt = AV_PIX_FMT_YUV420P;
    if (codec_id == AV_CODEC_ID_H264)
        av_opt_set(c->priv_data, "preset", "slow", 0);
    if (avcodec_open2(c, codec, NULL) < 0) {
        fprintf(stderr, "Could not open codec\n");
        exit(1);
    }
    file = fopen(filename, "wb");
    if (!file) {
        fprintf(stderr, "Could not open %s\n", filename);
        exit(1);
    }
    frame = av_frame_alloc();
    if (!frame) {
        fprintf(stderr, "Could not allocate video frame\n");
        exit(1);
    }
    frame->format = c->pix_fmt;
    frame->width  = c->width;
    frame->height = c->height;
    ret = av_image_alloc(frame->data, frame->linesize, c->width, c->height, c->pix_fmt, 32);
    if (ret < 0) {
        fprintf(stderr, "Could not allocate raw picture buffer\n");
        exit(1);
    }
}

/*
Write trailing data to the output file
and free resources allocated by ffmpeg_encoder_start.
*/
void ffmpeg_encoder_finish(void) {
    uint8_t endcode[] = { 0, 0, 1, 0xb7 };
    int got_output, ret;
    do {
        fflush(stdout);
        ret = avcodec_encode_video2(c, &pkt, NULL, &got_output);
        if (ret < 0) {
            fprintf(stderr, "Error encoding frame\n");
            exit(1);
        }
        if (got_output) {
            fwrite(pkt.data, 1, pkt.size, file);
            av_packet_unref(&pkt);
        }
    } while (got_output);
    fwrite(endcode, 1, sizeof(endcode), file);
    fclose(file);
    avcodec_close(c);
    av_free(c);
    av_freep(&frame->data[0]);
    av_frame_free(&frame);
}

/*
Encode one frame from an RGB24 input and save it to the output file.
Must be called after ffmpeg_encoder_start, and ffmpeg_encoder_finish
must be called after the last call to this function.
*/
void ffmpeg_encoder_encode_frame(uint8_t *rgb) {
    int ret, got_output;
    ffmpeg_encoder_set_frame_yuv_from_rgb(rgb);
    av_init_packet(&pkt);
    pkt.data = NULL;
    pkt.size = 0;
    switch (frame->pts % 4) {
        case 0:
            frame->key_frame = 1;
            frame->pict_type = AV_PICTURE_TYPE_I;
        break;
        case 1:
        case 3:
            frame->key_frame = 0;
            frame->pict_type = AV_PICTURE_TYPE_P;
        break;
        case 2:
            frame->key_frame = 0;
            frame->pict_type = AV_PICTURE_TYPE_B;
        break;
    }
    ret = avcodec_encode_video2(c, &pkt, frame, &got_output);
    if (ret < 0) {
        fprintf(stderr, "Error encoding frame\n");
        exit(1);
    }
    if (got_output) {
        fwrite(pkt.data, 1, pkt.size, file);
        av_packet_unref(&pkt);
    }
}

/* Represents the main loop of an application which generates one frame per loop. */
static void encode_example(const char *filename, int codec_id) {
    int pts;
    int width = 320;
    int height = 240;
    uint8_t *rgb = NULL;
    ffmpeg_encoder_start(filename, codec_id, 25, width, height);
    for (pts = 0; pts < 100; pts++) {
        frame->pts = pts;
        rgb = generate_rgb(width, height, pts, rgb);
        ffmpeg_encoder_encode_frame(rgb);
    }
    ffmpeg_encoder_finish();
}

int main(void) {
    avcodec_register_all();
    encode_example("tmp.h264", AV_CODEC_ID_H264);
    encode_example("tmp.mpg", AV_CODEC_ID_MPEG1VIDEO);
    /* TODO: is this encoded correctly? Possible to view it without container? */
    /*encode_example("tmp.vp8", AV_CODEC_ID_VP8);*/
    return 0;
}

Tested on Ubuntu 15.10. GitHub upstream.

Do you really want to do this?

In most cases, you are better off just controlling the global parameters of AVCodecContext.

FFmpeg does smart things like using a keyframe if the new frame is completely different from the previous one, and not much would be gained from differential encoding.

For example, if we set just:

c->keyint_min = 600;

then we get exactly 4 key-frames on the above example, which is logical since there are 4 abrupt frame changes on the generated video.