Sniffing IGMP messages on the local network

2019-03-03 08:14发布

I'm trying to sniff all IGMP messages on the local network (for crazy reasons not to be discussed ;-)). I have some questions related to this, as I'm not really an IGMP/routing expert.

Is it even possible? I know I can read IGMP from a raw socket, and I know you can use Wireshark to monitor the IGMP messages that reach your local computer, but what puzzles me is this:

I use a program on another computer (separated from the one running Wireshark by a switch) which will join a multicast address - BUT - it's not always that I even see the Membership report/JOIN in Wireshark. Now does anyone know if it's guaranteed that every IGMP join is spread out on the entire local network? Sometimes I see the join in Wireshark, sometimes I don't.

Assuming all IGMP join messages are always sent to every station on the network, shouldn't it be possible to monitor which stations are members of which multicast groups doing something like this (posix socket c++ code):

int rawSock = ::socket(AF_INET, SOCK_RAW, IPPROTO_IGMP);

uint8_t buf[10*1024];
while(true)
{
    ssize_t rval = ::recv(rawSock, buf, sizeof(buf), 0);
    iphdr *iph = (iphdr*)buf;
    printf("Received %d bytes - protocol %d\n", rval, iph->protocol);
    /*do whatever needed to the IGMP message*/
} 

1条回答
时光不老,我们不散
2楼-- · 2019-03-03 08:43

Your problem could be this... Every IGMP packet must have an IP TTL=1, that means that IGMP will never cross a routed boundary (such as a vlan).

From RFC 2236 - IGMP Version 2:

   Like ICMP, IGMP is a integral part of IP.  It is required to be
   implemented by all hosts wishing to receive IP multicasts.  IGMP
   messages are encapsulated in IP datagrams, with an IP protocol number
   of 2.  All IGMP messages described in this document are sent with IP
   TTL 1, and contain the IP Router Alert option [RFC 2113] in their IP
   header.

This means you can't be anywhere and see IGMP; you should check to be sure that your IGMP receiver above is on the same IP subnet as the sender. You also might check to see whether your machine is receiving IGMP with tshark or wireshark...

查看更多
登录 后发表回答