Should IBOutlets be strong or weak under ARC?

Question

I am developing exclusively for iOS 5 using ARC. Should IBOutlets to UIViews (and subclasses) be strong or weak?

The following:

@property (nonatomic, weak) IBOutlet UIButton *button;

Would get rid of all of this:

- (void)viewDidUnload
{
    // ...
    self.button = nil;
    // ...
}

Are there any problems doing this? The templates are using strong as are the automatically generated properties created when connecting directly to the header from the 'Interface Builder' editor, but why? The UIViewController already has a strong reference to its view which retains its subviews.

Answer 1

Be aware, IBOutletCollection should be @property (strong, nonatomic).

Answer 2

IBOutlet should be strong, for performance reason. See Storyboard Reference, Strong IBOutlet, Scene Dock in iOS 9

As explained in this paragraph, the outlets to subviews of the view controller’s view can be weak, because these subviews are already owned by the top-level object of the nib file. However, when an Outlet is defined as a weak pointer and the pointer is set, ARC calls the runtime function:

id objc_storeWeak(id *object, id value);

This adds the pointer (object) to a table using the object value as a key. This table is referred to as the weak table. ARC uses this table to store all the weak pointers of your application. Now, when the object value is deallocated, ARC will iterate over the weak table and set the weak reference to nil. Alternatively, ARC can call:

void objc_destroyWeak(id * object)

Then, the object is unregistered and objc_destroyWeak calls again:

objc_storeWeak(id *object, nil)

This book-keeping associated with a weak reference can take 2–3 times longer over the release of a strong reference. So, a weak reference introduces an overhead for the runtime that you can avoid by simply defining outlets as strong.

As of Xcode 7, it suggests strong

If you watch WWDC 2015 session 407 Implementing UI Designs in Interface Builder, it suggests (transcript from http://asciiwwdc.com/2015/sessions/407)

And the last option I want to point out is the storage type, which can either be strong or weak.

In general you should make your outlet strong, especially if you are connecting an outlet to a sub view or to a constraint that's not always going to be retained by the view hierarchy.

The only time you really need to make an outlet weak is if you have a custom view that references something back up the view hierarchy and in general that's not recommended.

So I'm going to choose strong and I will click connect which will generate my outlet.

Answer 3

WARNING, OUTDATED ANSWER: this answer is not up to date as per WWDC 2015, for the correct answer refer to the accepted answer (Daniel Hall) above. This answer will stay for record.

---

Summarized from the developer library:

From a practical perspective, in iOS and OS X outlets should be defined as declared properties. Outlets should generally be weak, except for those from File’s Owner to top-level objects in a nib file (or, in iOS, a storyboard scene) which should be strong. Outlets that you create will therefore typically be weak by default, because:

• Outlets that you create to, for example, subviews of a view controller’s view or a window controller’s window, are arbitrary references between objects that do not imply ownership.

• The strong outlets are frequently specified by framework classes (for example, UIViewController’s view outlet, or NSWindowController’s window outlet).

  @property (weak) IBOutlet MyView *viewContainerSubview;
  @property (strong) IBOutlet MyOtherClass *topLevelObject;
  

Answer 4

It looks like something has changed over the years and now Apple recommends to use strong in general. The evidence on their WWDC session is in session 407 - Implementing UI Designs in Interface Builder and starts at 32:30. My note from what he says is (almost, if not exactly, quoting him):

• outlet connections in general should be strong especially if we connect a subview or constraint that is not always retained by the view hierarchy

• weak outlet connection might be needed when creating custom views that has some reference to something back up in the view hierarchy and in general it is not recommended

In other wards it should be always strong now as long as some of our custom view doesn't create a retain cycle with some of the view up in the view hierarchy

EDIT :

Some may ask the question. Does keeping it with a strong reference doesn't create a retain cycle as the root view controller and the owning view keeps the reference to it? Or why that changed happened? I think the answer is earlier in this talk when they describe how the nibs are created from the xib. There is a separate nib created for a VC and for the view. I think this might be the reason why they change the recommendations. Still it would be nice to get a deeper explanation from Apple.

Answer 5

The current recommended best practice from Apple is for IBOutlets to be strong unless weak is specifically needed to avoid a retain cycle. As Johannes mentioned above, this was commented on in the "Implementing UI Designs in Interface Builder" session from WWDC 2015 where an Apple Engineer said:

And the last option I want to point out is the storage type, which can either be strong or weak. In general you should make your outlet strong, especially if you are connecting an outlet to a subview or to a constraint that's not always going to be retained by the view hierarchy. The only time you really need to make an outlet weak is if you have a custom view that references something back up the view hierarchy and in general that's not recommended.

I asked about this on Twitter to an engineer on the IB team and he confirmed that strong should be the default and that the developer docs are being updated.

https://twitter.com/_danielhall/status/620716996326350848 https://twitter.com/_danielhall/status/620717252216623104

Answer 6

One thing I wish to point out here, and that is, despite what the Apple engineers have stated in their own WWDC 2015 video here:

https://developer.apple.com/videos/play/wwdc2015/407/

Apple keeps changing their mind on the subject, which tells us that there is no single right answer to this question. To show that even Apple engineers are split on this subject, take a look at Apple's most recent sample code, and you'll see some people use weak, and some don't.

This Apple Pay example uses weak: https://developer.apple.com/library/ios/samplecode/Emporium/Listings/Emporium_ProductTableViewController_swift.html#//apple_ref/doc/uid/TP40016175-Emporium_ProductTableViewController_swift-DontLinkElementID_8

As does this picture-in-picture example: https://developer.apple.com/library/ios/samplecode/AVFoundationPiPPlayer/Listings/AVFoundationPiPPlayer_PlayerViewController_swift.html#//apple_ref/doc/uid/TP40016166-AVFoundationPiPPlayer_PlayerViewController_swift-DontLinkElementID_4

As does the Lister example: https://developer.apple.com/library/ios/samplecode/Lister/Listings/Lister_ListCell_swift.html#//apple_ref/doc/uid/TP40014701-Lister_ListCell_swift-DontLinkElementID_57

As does the Core Location example: https://developer.apple.com/library/ios/samplecode/PotLoc/Listings/Potloc_PotlocViewController_swift.html#//apple_ref/doc/uid/TP40016176-Potloc_PotlocViewController_swift-DontLinkElementID_6

As does the view controller previewing example: https://developer.apple.com/library/ios/samplecode/ViewControllerPreviews/Listings/Projects_PreviewUsingDelegate_PreviewUsingDelegate_DetailViewController_swift.html#//apple_ref/doc/uid/TP40016546-Projects_PreviewUsingDelegate_PreviewUsingDelegate_DetailViewController_swift-DontLinkElementID_5

As does the HomeKit example: https://developer.apple.com/library/ios/samplecode/HomeKitCatalog/Listings/HMCatalog_Homes_Action_Sets_ActionSetViewController_swift.html#//apple_ref/doc/uid/TP40015048-HMCatalog_Homes_Action_Sets_ActionSetViewController_swift-DontLinkElementID_23

All those are fully updated for iOS 9, and all use weak outlets. From this we learn that A. The issue is not as simple as some people make it out to be. B. Apple has changed their mind repeatedly, and C. You can use whatever makes you happy :)

Special thanks to Paul Hudson (author of www.hackingwithsift.com) who gave me the clarification, and references for this answer.

I hope this clarifies the subject a bit better!

Take care.