iOS CAKeyframeAnimation rotationMode on UIImageVie

Question

I am experimenting with Key Frame animation of the position of a UIImageView object moving along a bezier path. This pic shows the initial state before animation. The blue line is the path - initially moving straight up, the light green box is the initial bounding box or the image, and the dark green "ghost" is the image that I am moving:

When I kick off the animation with rotationMode set to nil, the image keeps the same orientation all the way through the path as expected.

But when I kick off the animation with rotationMode set to kCAAnimationRotateAuto, the image immediately rotates 90 degrees anti-clockwise and keeps this orientation all the way through the path. When it reaches the end of the path it redraws in the correct orientation (well it actually shows the UIImageView that I repositioned in the final location)

I was naively expecting that the rotationMode would orientate the image to the tangent of the path and not to the normal, especially when the Apple docs for the CAKeyframeAnimation rotationMode state

Determines whether objects animating along the path rotate to match the path tangent.

So what is the solution here? Do I have to pre-rotate the image by 90 degrees clockwise? Or is there something that I am missing?

Thanks for your help.

---

Edit 2nd March

I added a rotation step before the path animation using an Affine rotation like:

theImage.transform = CGAffineTransformRotate(theImage.transform,90.0*M_PI/180);

and then after the path animation, resetting the rotation with:

theImage.transform = CGAffineTransformIdentity;

This makes the image follow the path in the expected manner. However I am now running into a different problem of the image flickering. I am already looking for a solution to the flickering issue in this SO question:

iOS CAKeyFrameAnimation scaling flickers at animation end

So now I don't know if I have made things better or worse!

---

Edit March 12

While Caleb pointed out that yes, I did have to pre rotate my image, Rob provided an awesome package of code that almost completely solved my problems. The only thing that Rob didn't do was compensating for my assets being drawn with a vertical rather than horizontal orientation, thus still requiring to preRotate them by 90 degrees before doing the animation. But hey, its only fair that I have to do some of the work to get things running.

So my slight changes to Rob's solution to suite my requirements are:

1. When I add the UIView, I pre Rotate it to counter the inherent rotation added by setting the rotationMode:

   theImage.transform = CGAffineTransformMakeRotation(90*M_PI/180.0);

2. I need to keep that rotation at the end of the animation, so instead of just blasting the view's transform with a new scale factor after the completion block is defined, I build the scale based on the current transform:

   theImage.transform = CGAffineTransformScale(theImage.transform, scaleFactor, scaleFactor);

And that's all I had to do to get my image to follow the path as I expected!

---

Edit March 22

I have just uploaded to GitHub a demo project that shows off the moving of an object along a bezier path. The code can be found at PathMove

I also wrote about it in my blog at Moving objects along a bezier path in iOS

Answer 1

The issue here is that Core Animation's autorotation keeps the horizontal axis of the view parallel to the path's tangent. That's just how it works.

If you want your view's vertical axis to follow the path's tangent instead, rotating the contents of the view as you're currently doing is the reasonable thing to do.

Answer 2

Here's what you need to know to eliminate the flicker:

• As Caleb sort of pointed out, Core Animation rotates your layer so that its positive X axis lies along the tangent of your path. You need to make your image's “natural” orientation work with that. So, supposing that's a green spaceship in your example images, you need the spaceship to point to the right when it doesn't have rotation applied to it.

• Setting a transform that includes rotation interferes with the rotation applied by `kCAAnimationRotateAuto'. You need to remove the rotation from your transform before applying the animation.

• Of course that means you need to reapply the transformation when the animation completes. And of course you want to do that without seeing any flicker in the appearance of the image. That's not hard, but there some secret sauce involved, which I explain below.

• You presumably want your spaceship to start out pointing along the tangent of the path, even when the spaceship is sitting still having not been animated yet. If your spaceship image is pointing to the right, but your path goes up, then you need to set the transform of the image to include a 90° rotation. But perhaps you don't want to hardcode that rotation - instead you want to look at the path and figure out its starting tangent.

I'll show some of the important code here. You can find my test project on github. You may find some use in downloading it and trying it out. Just tap on the green “spaceship” to see the animation.

So, in my test project, I have connected my UIImageView to an action named animate:. When you touch it, the image moves along half of a figure 8 and doubles in size. When you touch it again, the image moves along the other half of the figure 8 (back to the starting position), and returns to its original size. Both animations use kCAAnimationRotateAuto, so the image points along the tangent of the path.

Here's the start of animate:, where I figure out what path, scale, and destination point the image should end up at:

- (IBAction)animate:(id)sender {
    UIImageView* theImage = self.imageView;

    UIBezierPath *path = _isReset ? _path0 : _path1;
    CGFloat newScale = 3 - _currentScale;

    CGPoint destination = [path currentPoint];

So, the first thing I need to do is remove any rotation from the image's transform, since as I mentioned, it will interfere with kCAAnimationRotateAuto:

    // Strip off the image's rotation, because it interferes with `kCAAnimationRotateAuto`.
    theImage.transform = CGAffineTransformMakeScale(_currentScale, _currentScale);

Next, I go into a UIView animation block so that the system will apply animations to the image view:

    [UIView animateWithDuration:3 animations:^{

I create the keyframe animation for the position and set a couple of its properties:

        // Prepare my own keypath animation for the layer position.
        // The layer position is the same as the view center.
        CAKeyframeAnimation *positionAnimation = [CAKeyframeAnimation animationWithKeyPath:@"position"];
        positionAnimation.path = path.CGPath;
        positionAnimation.rotationMode = kCAAnimationRotateAuto;

Next is the secret sauce for preventing flicker at the end of the animation. Recall that animations do not effect the properties of the “model layer“ that you attach them to (theImage.layer in this case). Instead, they update the properties of the “presentation layer“, which reflects what's actually on the screen.

So first I set removedOnCompletion to NO for the keyframe animation. This means the animation will stay attached to the model layer when the animation is complete, which means I can access the presentation layer. I get the transform from the presentation layer, remove the animation, and apply the transform to the model layer. Since this is all happening on the main thread, these property changes all happen in one screen refresh cycle, so there's no flicker.

        positionAnimation.removedOnCompletion = NO;
        [CATransaction setCompletionBlock:^{
            CGAffineTransform finalTransform = [theImage.layer.presentationLayer affineTransform];
            [theImage.layer removeAnimationForKey:positionAnimation.keyPath];
            theImage.transform = finalTransform;
        }];

Now that I've set up the completion block, I can actually change the view properties. The system will automatically attach animations to the layer when I do this.

        // UIView will add animations for both of these changes.
        theImage.transform = CGAffineTransformMakeScale(newScale, newScale);
        theImage.center = destination;

I copy some key properties from the automatically-added position animation to my keyframe animation:

        // Copy properties from UIView's animation.
        CAAnimation *autoAnimation = [theImage.layer animationForKey:positionAnimation.keyPath];
        positionAnimation.duration = autoAnimation.duration;
        positionAnimation.fillMode = autoAnimation.fillMode;

and finally I replace the automatically-added position animation with the keyframe animation:

        // Replace UIView's animation with my animation.
        [theImage.layer addAnimation:positionAnimation forKey:positionAnimation.keyPath];
    }];

Double-finally I update my instance variables to reflect the change to the image view:

    _currentScale = newScale;
    _isReset = !_isReset;
}

That's it for animating the image view with no flicker.

And now, as Steve Jobs would say, One Last Thing. When I load the view, I need to set the transform of the image view so that it's rotated to point along the tangent of the first path that I will use to animate it. I do that in a method named reset:

- (void)reset {
    self.imageView.center = _path1.currentPoint;
    self.imageView.transform = CGAffineTransformMakeRotation(startRadiansForPath(_path0));
    _currentScale = 1;
    _isReset = YES;
}

Of course, the tricky bit is hidden in that startRadiansForPath function. It's really not that hard. I use the CGPathApply function to process the elements of the path, picking out the first two points that actually form a subpath, and I compute the angle of the line formed by those two points. (A curved path section is either a quadratic or cubic bezier spline, and those splines have the property that the tangent at the first point of the spline is the line from the first point to the next control point.)

I'm just going to dump the code here without explanation, for posterity:

typedef struct {
    CGPoint p0;
    CGPoint p1;
    CGPoint firstPointOfCurrentSubpath;
    CGPoint currentPoint;
    BOOL p0p1AreSet : 1;
} PathState;

static inline void updateStateWithMoveElement(PathState *state, CGPathElement const *element) {
    state->currentPoint = element->points[0];
    state->firstPointOfCurrentSubpath = state->currentPoint;
}

static inline void updateStateWithPoints(PathState *state, CGPoint p1, CGPoint currentPoint) {
    if (!state->p0p1AreSet) {
        state->p0 = state->currentPoint;
        state->p1 = p1;
        state->p0p1AreSet = YES;
    }
    state->currentPoint = currentPoint;
}

static inline void updateStateWithPointsElement(PathState *state, CGPathElement const *element, int newCurrentPointIndex) {
    updateStateWithPoints(state, element->points[0], element->points[newCurrentPointIndex]);
}

static void updateStateWithCloseElement(PathState *state, CGPathElement const *element) {
    updateStateWithPoints(state, state->firstPointOfCurrentSubpath, state->firstPointOfCurrentSubpath);
}

static void updateState(void *info, CGPathElement const *element) {
    PathState *state = info;
    switch (element->type) {
        case kCGPathElementMoveToPoint: return updateStateWithMoveElement(state, element);
        case kCGPathElementAddLineToPoint: return updateStateWithPointsElement(state, element, 0);
        case kCGPathElementAddQuadCurveToPoint: return updateStateWithPointsElement(state, element, 1);
        case kCGPathElementAddCurveToPoint: return updateStateWithPointsElement(state, element, 2);
        case kCGPathElementCloseSubpath: return updateStateWithCloseElement(state, element);
    }
}

CGFloat startRadiansForPath(UIBezierPath *path) {
    PathState state;
    memset(&state, 0, sizeof state);
    CGPathApply(path.CGPath, &state, updateState);
    return atan2f(state.p1.y - state.p0.y, state.p1.x - state.p0.x);
}

Answer 3

Yow mention that you kick off the animation with "rotationMode set to YES", but the documentation states that rotationMode should be set using an NSString...

In particular:

These constants are used by the rotationMode property.

NSString * const kCAAnimationRotateAuto

NSString * const kCAAnimationRotateAutoReverse

Have you tried setting:

keyframe.animationMode = kCAAnimationRotateAuto;

The documentation states:

kCAAnimationRotateAuto: The objects travel on a tangent to the path.