Calculating Modbus RTU CRC 16

Question

I'm implementing a software where I read and write data in Modbus RTU protocolo via serial. For that, I need to calculate the two CRC byte at the end of the string of bytes, but I'm being incapable of doing this.

Searching throughout the web, I found two functions that seems to calculate the CRC correctly:

WORD CRC16 (const BYTE *nData, WORD wLength)
{
    static const WORD wCRCTable[] = {
       0X0000, 0XC0C1, 0XC181, 0X0140, 0XC301, 0X03C0, 0X0280, 0XC241,
       0XC601, 0X06C0, 0X0780, 0XC741, 0X0500, 0XC5C1, 0XC481, 0X0440,
       0XCC01, 0X0CC0, 0X0D80, 0XCD41, 0X0F00, 0XCFC1, 0XCE81, 0X0E40,
       0X0A00, 0XCAC1, 0XCB81, 0X0B40, 0XC901, 0X09C0, 0X0880, 0XC841,
       0XD801, 0X18C0, 0X1980, 0XD941, 0X1B00, 0XDBC1, 0XDA81, 0X1A40,
       0X1E00, 0XDEC1, 0XDF81, 0X1F40, 0XDD01, 0X1DC0, 0X1C80, 0XDC41,
       0X1400, 0XD4C1, 0XD581, 0X1540, 0XD701, 0X17C0, 0X1680, 0XD641,
       0XD201, 0X12C0, 0X1380, 0XD341, 0X1100, 0XD1C1, 0XD081, 0X1040,
       0XF001, 0X30C0, 0X3180, 0XF141, 0X3300, 0XF3C1, 0XF281, 0X3240,
       0X3600, 0XF6C1, 0XF781, 0X3740, 0XF501, 0X35C0, 0X3480, 0XF441,
       0X3C00, 0XFCC1, 0XFD81, 0X3D40, 0XFF01, 0X3FC0, 0X3E80, 0XFE41,
       0XFA01, 0X3AC0, 0X3B80, 0XFB41, 0X3900, 0XF9C1, 0XF881, 0X3840,
       0X2800, 0XE8C1, 0XE981, 0X2940, 0XEB01, 0X2BC0, 0X2A80, 0XEA41,
       0XEE01, 0X2EC0, 0X2F80, 0XEF41, 0X2D00, 0XEDC1, 0XEC81, 0X2C40,
       0XE401, 0X24C0, 0X2580, 0XE541, 0X2700, 0XE7C1, 0XE681, 0X2640,
       0X2200, 0XE2C1, 0XE381, 0X2340, 0XE101, 0X21C0, 0X2080, 0XE041,
       0XA001, 0X60C0, 0X6180, 0XA141, 0X6300, 0XA3C1, 0XA281, 0X6240,
       0X6600, 0XA6C1, 0XA781, 0X6740, 0XA501, 0X65C0, 0X6480, 0XA441,
       0X6C00, 0XACC1, 0XAD81, 0X6D40, 0XAF01, 0X6FC0, 0X6E80, 0XAE41,
       0XAA01, 0X6AC0, 0X6B80, 0XAB41, 0X6900, 0XA9C1, 0XA881, 0X6840,
       0X7800, 0XB8C1, 0XB981, 0X7940, 0XBB01, 0X7BC0, 0X7A80, 0XBA41,
       0XBE01, 0X7EC0, 0X7F80, 0XBF41, 0X7D00, 0XBDC1, 0XBC81, 0X7C40,
       0XB401, 0X74C0, 0X7580, 0XB541, 0X7700, 0XB7C1, 0XB681, 0X7640,
       0X7200, 0XB2C1, 0XB381, 0X7340, 0XB101, 0X71C0, 0X7080, 0XB041,
       0X5000, 0X90C1, 0X9181, 0X5140, 0X9301, 0X53C0, 0X5280, 0X9241,
       0X9601, 0X56C0, 0X5780, 0X9741, 0X5500, 0X95C1, 0X9481, 0X5440,
       0X9C01, 0X5CC0, 0X5D80, 0X9D41, 0X5F00, 0X9FC1, 0X9E81, 0X5E40,
       0X5A00, 0X9AC1, 0X9B81, 0X5B40, 0X9901, 0X59C0, 0X5880, 0X9841,
       0X8801, 0X48C0, 0X4980, 0X8941, 0X4B00, 0X8BC1, 0X8A81, 0X4A40,
       0X4E00, 0X8EC1, 0X8F81, 0X4F40, 0X8D01, 0X4DC0, 0X4C80, 0X8C41,
       0X4400, 0X84C1, 0X8581, 0X4540, 0X8701, 0X47C0, 0X4680, 0X8641,
       0X8201, 0X42C0, 0X4380, 0X8341, 0X4100, 0X81C1, 0X8081, 0X4040 };

    BYTE nTemp;
    WORD wCRCWord = 0xFFFF;

    while (wLength--)
    {
        nTemp = *nData++ ^ wCRCWord;
        wCRCWord >>= 8;
        wCRCWord  ^= wCRCTable[nTemp];
    }
    return wCRCWord;
} // End: CRC16

And

uint CRC16_2(QByteArray buf, int len)
{
  uint crc = 0xFFFF;

  for (int pos = 0; pos < len; pos++)
  {
    crc ^= (uint)buf[pos];          // XOR byte into least sig. byte of crc

    for (int i = 8; i != 0; i--) {    // Loop over each bit
      if ((crc & 0x0001) != 0) {      // If the LSB is set
        crc >>= 1;                    // Shift right and XOR 0xA001
        crc ^= 0xA001;
      }
      else                            // Else LSB is not set
        crc >>= 1;                    // Just shift right
    }
  }
  // Note, this number has low and high bytes swapped, so use it accordingly (or swap bytes)
  return crc;
}

The problem is that I'm supposed to get two hex bytes as CRC numbers while this functions returns a integer value. For example, for "01" (1 byte), I was supposed to get a "7E80" while I get "21695", and I'm being unable to do some sort of conversion from this to that hex data.

My question, therefore, is: how do I go from the integer result to the double hex result needed? I tried a couple of options, with no success.

I'm glad for any help,

Momergil.

Note: I'm using Qt, so if one could find a solution implementing QByteArray or another Qt friendly code, I'll be glad. Either way a solution not using Qt, C or C++ is useless :P

Answer 1

Here are my two cents. First thing you cant return two values to a function so

1. Append two values to the array(remember to remove const)
2. Return a struct containing these two values.

3. Proccess return value as follow

   WORD n = CRC16(nData,wLength);
   WORD x = (0xFF00&n)>>8,y=0x00FF&n;
   printf("0x%04x\n", n); // to check original value
   printf("0x%02x\t0x%02x\n",x,y); // to check separated values
   

Try this and let me know.

Answer 2

unsigned int CRC16_2(unsigned char *buf, int len)
{  
  unsigned int crc = 0xFFFF;
  for (int pos = 0; pos < len; pos++)
  {
  crc ^= (unsigned int)buf[pos];    // XOR byte into least sig. byte of crc

  for (int i = 8; i != 0; i--) {    // Loop over each bit
    if ((crc & 0x0001) != 0) {      // If the LSB is set
      crc >>= 1;                    // Shift right and XOR 0xA001
      crc ^= 0xA001;
    }
    else                            // Else LSB is not set
      crc >>= 1;                    // Just shift right
    }
  }

  return crc;
}

im kind of a noob myself, butttt-

i used the code u provided and tested it myself, and as u said it didnt work right, but then i realized it was passing hex chars, so i just changed uint to char and it checks out for me at least.

i even calculated a sample by hand to double check.

Answer 3

I tried using the first example of code you posted in here (the one using table) and I found out, that there is a mistake in using index. To make the code running correctly, you have to access to the table in the area limited by its size.

wCRCWord  ^= wCRCTable[(nTemp & 0xFF)];

So the whole code, that returns correct value of CRC16 for MODBUS is listed below. The number returned has already swaped Lo and Hi byte.

WORD CRC16 (const BYTE *nData, WORD wLength)
{
    static const WORD wCRCTable[] = {
    0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241,
    0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440,
    0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40,
    0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841,
    0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40,
    0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41,
    0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641,
    0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040,
    0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240,
    0x3600, 0xF6C1, 0xF781, 0x3740, 0xF501, 0x35C0, 0x3480, 0xF441,
    0x3C00, 0xFCC1, 0xFD81, 0x3D40, 0xFF01, 0x3FC0, 0x3E80, 0xFE41,
    0xFA01, 0x3AC0, 0x3B80, 0xFB41, 0x3900, 0xF9C1, 0xF881, 0x3840,
    0x2800, 0xE8C1, 0xE981, 0x2940, 0xEB01, 0x2BC0, 0x2A80, 0xEA41,
    0xEE01, 0x2EC0, 0x2F80, 0xEF41, 0x2D00, 0xEDC1, 0xEC81, 0x2C40,
    0xE401, 0x24C0, 0x2580, 0xE541, 0x2700, 0xE7C1, 0xE681, 0x2640,
    0x2200, 0xE2C1, 0xE381, 0x2340, 0xE101, 0x21C0, 0x2080, 0xE041,
    0xA001, 0x60C0, 0x6180, 0xA141, 0x6300, 0xA3C1, 0xA281, 0x6240,
    0x6600, 0xA6C1, 0xA781, 0x6740, 0xA501, 0x65C0, 0x6480, 0xA441,
    0x6C00, 0xACC1, 0xAD81, 0x6D40, 0xAF01, 0x6FC0, 0x6E80, 0xAE41,
    0xAA01, 0x6AC0, 0x6B80, 0xAB41, 0x6900, 0xA9C1, 0xA881, 0x6840,
    0x7800, 0xB8C1, 0xB981, 0x7940, 0xBB01, 0x7BC0, 0x7A80, 0xBA41,
    0xBE01, 0x7EC0, 0x7F80, 0xBF41, 0x7D00, 0xBDC1, 0xBC81, 0x7C40,
    0xB401, 0x74C0, 0x7580, 0xB541, 0x7700, 0xB7C1, 0xB681, 0x7640,
    0x7200, 0xB2C1, 0xB381, 0x7340, 0xB101, 0x71C0, 0x7080, 0xB041,
    0x5000, 0x90C1, 0x9181, 0x5140, 0x9301, 0x53C0, 0x5280, 0x9241,
    0x9601, 0x56C0, 0x5780, 0x9741, 0x5500, 0x95C1, 0x9481, 0x5440,
    0x9C01, 0x5CC0, 0x5D80, 0x9D41, 0x5F00, 0x9FC1, 0x9E81, 0x5E40,
    0x5A00, 0x9AC1, 0x9B81, 0x5B40, 0x9901, 0x59C0, 0x5880, 0x9841,
    0x8801, 0x48C0, 0x4980, 0x8941, 0x4B00, 0x8BC1, 0x8A81, 0x4A40,
    0x4E00, 0x8EC1, 0x8F81, 0x4F40, 0x8D01, 0x4DC0, 0x4C80, 0x8C41,
    0x4400, 0x84C1, 0x8581, 0x4540, 0x8701, 0x47C0, 0x4680, 0x8641,
    0x8201, 0x42C0, 0x4380, 0x8341, 0x4100, 0x81C1, 0x8081, 0x4040 };

    BYTE nTemp;
    WORD wCRCWord = 0xFFFF;

    while (wLength--)
    {
        nTemp = *nData++ ^ wCRCWord;
        wCRCWord >>= 8;
        wCRCWord  ^= wCRCTable[(nTemp & 0xFF)];
    }
    return wCRCWord;
} // End: CRC16

Answer 4

According to MODBUS over serial line specification and implementation guide V1.02, the CRC is sent little-endian (low byte first).

I have no idea, though, how you came up with needing any hexadecimal bytes for the CRC. MODBUS RTU is a binary protocol, and the CRC is sent as two bytes, not as four hexadecimal digits!

Here's how you'd do it, using the CRC16 function you provided.

QByteArray makeRTUFrame(int slave, int function, const QByteArray & data) {
    Q_ASSERT(data.size() <= 252);
    QByteArray frame;
    QDataStream ds(&frame, QIODevice::WriteOnly);
    ds.setByteOrder(QDataStream::LittleEndian);
    ds << quint8(slave) << quint8(function);
    ds.writeRawData(data.constData(), data.size());
    int const crc = CRC16((BYTE*)frame.constData(), frame.size());
    ds << quint16(crc);
    return frame;
}