Creating a daemon in Linux

Question

In Linux I want to add a daemon that cannot be stopped and which monitors filesystem changes. If any changes are detected, it should write the path to the console where it was started plus a newline.

I already have the filesystem changing code almost ready but I cannot figure out how to create a daemon.

My code is from here: http://www.yolinux.com/TUTORIALS/ForkExecProcesses.html

What to do after the fork?

int main (int argc, char **argv) {

  pid_t pID = fork();
  if (pID == 0)  {              // child
          // Code only executed by child process    
      sIdentifier = "Child Process: ";
    }
    else if (pID < 0) {
        cerr << "Failed to fork" << endl;
        exit(1);
       // Throw exception
    }
    else                                   // parent
    {
      // Code only executed by parent process

      sIdentifier = "Parent Process:";
    }       

    return 0;
}

Answer 1

A daemon is just a process in the background. If you want to start your program when the OS boots, on linux, you add your start command to /etc/rc.d/rc.local (run after all other scripts) or /etc/startup.sh

On windows, you make a service, register the service, and then set it to start automatically at boot in administration -> services panel.

Answer 2

man 7 daemon describes how to create daemon in great detail. My answer is just excerpt from this manual.

There are at least two types of daemons:

1. traditional SysV daemons (old-style),
2. systemd daemons (new-style).

---

SysV Daemons

If you are interested in traditional SysV daemon, you should implement the following steps:

1. Close all open file descriptors except standard input, output, and error (i.e. the first three file descriptors 0, 1, 2). This ensures that no accidentally passed file descriptor stays around in the daemon process. On Linux, this is best implemented by iterating through /proc/self/fd, with a fallback of iterating from file descriptor 3 to the value returned by getrlimit() for RLIMIT_NOFILE.
2. Reset all signal handlers to their default. This is best done by iterating through the available signals up to the limit of _NSIG and resetting them to SIG_DFL.
3. Reset the signal mask using sigprocmask().
4. Sanitize the environment block, removing or resetting environment variables that might negatively impact daemon runtime.
5. Call fork(), to create a background process.
6. In the child, call setsid() to detach from any terminal and create an independent session.
7. In the child, call fork() again, to ensure that the daemon can never re-acquire a terminal again.
8. Call exit() in the first child, so that only the second child (the actual daemon process) stays around. This ensures that the daemon process is re-parented to init/PID 1, as all daemons should be.
9. In the daemon process, connect /dev/null to standard input, output, and error.
10. In the daemon process, reset the umask to 0, so that the file modes passed to open(), mkdir() and suchlike directly control the access mode of the created files and directories.
11. In the daemon process, change the current directory to the root directory (/), in order to avoid that the daemon involuntarily blocks mount points from being unmounted.
12. In the daemon process, write the daemon PID (as returned by getpid()) to a PID file, for example /run/foobar.pid (for a hypothetical daemon "foobar") to ensure that the daemon cannot be started more than once. This must be implemented in race-free fashion so that the PID file is only updated when it is verified at the same time that the PID previously stored in the PID file no longer exists or belongs to a foreign process.
13. In the daemon process, drop privileges, if possible and applicable.
14. From the daemon process, notify the original process started that initialization is complete. This can be implemented via an unnamed pipe or similar communication channel that is created before the first fork() and hence available in both the original and the daemon process.
15. Call exit() in the original process. The process that invoked the daemon must be able to rely on that this exit() happens after initialization is complete and all external communication channels are established and accessible.

Note this warning:

The BSD daemon() function should not be used, as it implements only a subset of these steps.

A daemon that needs to provide compatibility with SysV systems should implement the scheme pointed out above. However, it is recommended to make this behavior optional and configurable via a command line argument to ease debugging as well as to simplify integration into systems using systemd.

Note that daemon() is not POSIX compliant.

---

New-Style Daemons

For new-style daemons the following steps are recommended:

1. If SIGTERM is received, shut down the daemon and exit cleanly.
2. If SIGHUP is received, reload the configuration files, if this applies.
3. Provide a correct exit code from the main daemon process, as this is used by the init system to detect service errors and problems. It is recommended to follow the exit code scheme as defined in the LSB recommendations for SysV init scripts.
4. If possible and applicable, expose the daemon's control interface via the D-Bus IPC system and grab a bus name as last step of initialization.
5. For integration in systemd, provide a .service unit file that carries information about starting, stopping and otherwise maintaining the daemon. See systemd.service(5) for details.
6. As much as possible, rely on the init system's functionality to limit the access of the daemon to files, services and other resources, i.e. in the case of systemd, rely on systemd's resource limit control instead of implementing your own, rely on systemd's privilege dropping code instead of implementing it in the daemon, and similar. See systemd.exec(5) for the available controls.
7. If D-Bus is used, make your daemon bus-activatable by supplying a D-Bus service activation configuration file. This has multiple advantages: your daemon may be started lazily on-demand; it may be started in parallel to other daemons requiring it — which maximizes parallelization and boot-up speed; your daemon can be restarted on failure without losing any bus requests, as the bus queues requests for activatable services. See below for details.
8. If your daemon provides services to other local processes or remote clients via a socket, it should be made socket-activatable following the scheme pointed out below. Like D-Bus activation, this enables on-demand starting of services as well as it allows improved parallelization of service start-up. Also, for state-less protocols (such as syslog, DNS), a daemon implementing socket-based activation can be restarted without losing a single request. See below for details.
9. If applicable, a daemon should notify the init system about startup completion or status updates via the sd_notify(3) interface.
10. Instead of using the syslog() call to log directly to the system syslog service, a new-style daemon may choose to simply log to standard error via fprintf(), which is then forwarded to syslog by the init system. If log levels are necessary, these can be encoded by prefixing individual log lines with strings like "<4>" (for log level 4 "WARNING" in the syslog priority scheme), following a similar style as the Linux kernel's printk() level system. For details, see sd-daemon(3) and systemd.exec(5).

---

To learn more read whole man 7 daemon.

Answer 3

I can stop at the first requirement "A daemon which cannot be stopped ..."

Not possible my friend; however, you can achieve the same with a much better tool, a kernel module.

http://www.infoq.com/articles/inotify-linux-file-system-event-monitoring

All daemons can be stopped. Some are more easily stopped than others. Even a daemon pair with the partner in hold down, respawning the partner if lost, can be stopped. You just have to work a little harder at it.

Answer 4

You cannot create a process in linux that cannot be killed. The root user (uid=0) can send a signal to a process, and there are two signals which cannot be caught, SIGKILL=9, SIGSTOP=19. And other signals (when uncaught) can also result in process termination.

You may want a more general daemonize function, where you can specify a name for your program/daemon, and a path to run your program (perhaps "/" or "/tmp"). You may also want to provide file(s) for stderr and stdout (and possibly a control path using stdin).

Here are the necessary includes:

#include <stdio.h>    //printf(3)
#include <stdlib.h>   //exit(3)
#include <unistd.h>   //fork(3), chdir(3), sysconf(3)
#include <signal.h>   //signal(3)
#include <sys/stat.h> //umask(3)
#include <syslog.h>   //syslog(3), openlog(3), closelog(3)

And here is a more general function,

int
daemonize(char* name, char* path, char* outfile, char* errfile, char* infile )
{
    if(!path) { path="/"; }
    if(!name) { name="medaemon"; }
    if(!infile) { infile="/dev/null"; }
    if(!outfile) { outfile="/dev/null"; }
    if(!errfile) { errfile="/dev/null"; }
    //printf("%s %s %s %s\n",name,path,outfile,infile);
    pid_t child;
    //fork, detach from process group leader
    if( (child=fork())<0 ) { //failed fork
        fprintf(stderr,"error: failed fork\n");
        exit(EXIT_FAILURE);
    }
    if (child>0) { //parent
        exit(EXIT_SUCCESS);
    }
    if( setsid()<0 ) { //failed to become session leader
        fprintf(stderr,"error: failed setsid\n");
        exit(EXIT_FAILURE);
    }

    //catch/ignore signals
    signal(SIGCHLD,SIG_IGN);
    signal(SIGHUP,SIG_IGN);

    //fork second time
    if ( (child=fork())<0) { //failed fork
        fprintf(stderr,"error: failed fork\n");
        exit(EXIT_FAILURE);
    }
    if( child>0 ) { //parent
        exit(EXIT_SUCCESS);
    }

    //new file permissions
    umask(0);
    //change to path directory
    chdir(path);

    //Close all open file descriptors
    int fd;
    for( fd=sysconf(_SC_OPEN_MAX); fd>0; --fd )
    {
        close(fd);
    }

    //reopen stdin, stdout, stderr
    stdin=fopen(infile,"r");   //fd=0
    stdout=fopen(outfile,"w+");  //fd=1
    stderr=fopen(errfile,"w+");  //fd=2

    //open syslog
    openlog(name,LOG_PID,LOG_DAEMON);
    return(0);
}

Here is a sample program, which becomes a daemon, hangs around, and then leaves.

int
main()
{
    int res;
    int ttl=120;
    int delay=5;
    if( (res=daemonize("mydaemon","/tmp",NULL,NULL,NULL)) != 0 ) {
        fprintf(stderr,"error: daemonize failed\n");
        exit(EXIT_FAILURE);
    }
    while( ttl>0 ) {
        //daemon code here
        syslog(LOG_NOTICE,"daemon ttl %d",ttl);
        sleep(delay);
        ttl-=delay;
    }
    syslog(LOG_NOTICE,"daemon ttl expired");
    closelog();
    return(EXIT_SUCCESS);
}

Note that SIG_IGN indicates to catch and ignore the signal. You could build a signal handler that can log signal receipt, and set flags (such as a flag to indicate graceful shutdown).

Answer 5

By calling fork() you've created a child process. If the fork is successful (fork returned a non-zero PID) execution will continue from this point from within the child process. In this case we want to gracefully exit the parent process and then continue our work in the child process.

Maybe this will help: http://www.netzmafia.de/skripten/unix/linux-daemon-howto.html

Answer 6

Try using the daemon function:

#include <unistd.h>

int daemon(int nochdir, int noclose);

From the man page:

The daemon() function is for programs wishing to detach themselves from the controlling terminal and run in the background as system daemons.

If nochdir is zero, daemon() changes the calling process's current working directory to the root directory ("/"); otherwise, the current working directory is left unchanged.

If noclose is zero, daemon() redirects standard input, standard output and standard error to /dev/null; otherwise, no changes are made to these file descriptors.