I am trying to move something to /usr/bin on OS X El Capitan. I have disabled rootless using the following commands: sudo nvram boot-args="rootless=0"; sudo reboot
, but I keep getting the same error:
MacBook-Air:~ Mark$ sudo cp class-dump /usr/bin
Password:
cp: /usr/bin/class-dump: Operation not permitted
MacBook-Air:~ Mark$ sudo mv class-dump /usr/bin
mv: rename class-dump to /usr/bin/class-dump: Operation not permitted
If you want to take control of
/usr/bin/
You will need to reboot your system:
Right after the boot sound, Hold down Command-R to boot into the Recovery System
Click the Utilities menu and select Terminal
Type csrutil disable and press return
Click the menu and select Restart
Once you have committed your changes, make sure to re-enable SIP! It does a lot to protect your system. (Same steps as above except type: csrutil enable)
Correct solution is to copy or install to
/usr/local/bin
not/usr/bin
.This is due to System Integrity Protection (SIP). SIP makes/usr/bin
read-only but leaves/usr/local
as read-write.SIP should not be disabled as stated in the answer above because it adds another layer of protection against malware gaining root access. Here is a complete explanation of what SIP does and why it is useful.
As suggested in this answer one should not disable SIP (rootless mode) "It is not recommended to disable rootless mode! The best practice is to install custom stuff to "/usr/local" only."
Nvm. For anyone else having this problem you need to reboot your mac and press ⌘+R when booting up. Then go into Utilities > Terminal and type the following commands:
This is a result of System Integrity Protection. More info here.
EDIT
If you know what you are doing and are used to running Linux, you should use the above solution as many of the SIP restrictions are a complete pain in the ass.
However, if you are a tinkerer/noob/"poweruser" and don't know what you are doing, this can be very dangerous and you are better off using the answer below.