Reading Mifare Classic returns strange characters

Question

When reading a MIFARE card with Android and converting the data to UTF-8 I get strange characters like �. I'm trying to build an application that can read some kind of ID card we're using. The problem now is that I get weird characters between words and some words are split between blocks so how can I safely get a word I'm looking for? For instance my readings is something like this:

43224���19032019�� at block 2 sektor 2 bindex :8

and with splitting where rest of the number starting with 19 is at a new block:

�me Name���M���19

at block 1 sektor 1 bindex :4

930402���NO934951

at block 2 sektor 1 bindex :4

c5 42 4e 49 44 00 07 4f 4f 4f 4f 4f 4f 00 4b 42   "Åbnid" "OOOOOO" "KB"
44 44 44 20 44 44 44 44 44 00 82 4d 00 c9 31 39   "DDD DDDDD" "M" "19"
39 34 34 33 34 32 00 d0 4e 4f 39 36 36 36 35 31   "944342" "NO966651"
00 00 00 00 00 00 70 f7 88 00 00 00 00 00 00 00
30 32 32 20 20 41 53 00 d3 54 4f 54 41 4c 20 4b   "022" "AS" "Total k"
4f 4e 54 52 4f 4c 4c 20 41 53 20 00 c9 30 32 38   "ONTROLL AS" "028"
37 30 34 33 33 00 c9 32 30 32 31 30 32 31 31 00   "70433" "20210211"
00 00 00 00 00 00 70 f7 88 00 00 00 00 00 00 00

This is how I read from the card:

Tag tagFromIntent = intent.getParcelableExtra(NfcAdapter.EXTRA_TAG);
MifareClassic mfc = MifareClassic.get(tagFromIntent);

Here is my code I use for reading inside a for loop:

 data = mfc.readBlock(bIndex + block); 

and then for converting data to UTF8 for printing I use:

   public String convertByteArrayToUTF8(byte[] bytes){
    String encoded = null;
    try {
        encoded = new String(bytes, StandardCharsets.UTF_8);
    }
    catch (Exception e){
        encoded = new String(bytes, Charset.defaultCharset());
    }
    return encoded;
}

I've tried with ASCII, UTF-16 etc with no luck.

Answer 1

So the data on your tag (excluding the sector trailers looks somewhat like that:

C5 42 4E 49 44 00 07 4F 4F 4F 4F 4F 4F 00 4B 42        ÅBNID..OOOOOO.KB
44 44 44 20 44 44 44 44 44 00 82 4D 00 C9 31 39        DDD DDDDD.‚M.É19
39 34 34 33 34 32 00 D0 4E 4F 39 36 36 36 35 31        944342.ÐNO966651
30 32 32 20 20 41 53 00 D3 54 4F 54 41 4C 20 4B        022  AS.ÓTOTAL K
4F 4E 54 52 4F 4C 4C 20 41 53 20 00 C9 30 32 38        ONTROLL AS .É028
37 30 34 33 33 00 C9 32 30 32 31 30 32 31 31 00        70433.É20210211.

This seems to be some form of structured data. Simply converting the whole binary blob into a UTF-8 (or ASCII) encoded string doesn't make much sense. Instead, you will need to reverse engineer the way that the data is structured (or, even better, you try to obtain the specification from the system manufacturer).

From what I can see, it looks as if that data consisted of multiple null-terminated strings embedded into some compact (Tag)-Length-Value format. The first byte seems to be the tag(?) + length, so we have

C5    Length = 5
    42 4E 49 44 00                                               "BNID"
07    Length = 7
    4F 4F 4F 4F 4F 4F 00                                         "OOOOOO"
4B    Length = 11
    42 44 44 44 20 44 44 44 44 44 00                             "KBDDD DDDDD"
82    Length = 2
    4D 00                                                        "M"
C9    Length = 9
    31 39 39 34 34 33 34 32 00                                   "19944342"
D0    Length = 16
    4E 4F 39 36 36 36 35 31 30 32 32 20 20 41 53 00              "NO966651022  AS"
D3    Length = 19
    54 4F 54 41 4C 20 4B 4F 4E 54 52 4F 4C 4C 20 41 53 20 00     "TOTAL KONTROLL AS "
C9    Length = 9
    30 32 38 37 30 34 33 33 00                                   "02870433"
C9    Length = 9
    32 30 32 31 30 32 31 31 00                                   "20210211"

The first byte could, for instance, be split into tag and length like this: TTTL LLLL (upper 3 bits encode the tag, lower 5 bits encode the length of the following value). This would give the following tags

• 0x6 for "BNID", "19944342", "NO966651022 AS", "TOTAL KONTROLL AS ", "02870433", and "20210211"
• 0x0 for "OOOOOO"
• 0x2 for "KBDDD DDDDD"
• 0x4 for "M"

Hence, the split between tag and length might also be TTLL LLLL (upper 2 bits encode the tag, lower 6 bits encode the length of the following value).

Unfortunately, the format doesn't resemble any of the popular formats that I'm aware of. So you could just continue your reverse engineering by comparing multiple different cards and by deriving meaning from the values.

So far, in order to decode the above, you would start by reading the first byte, extract the length from that byte, cut that amount of follow-up bytes and convert them into a string (based on the sample that you provided, ASCII encoding should do). You can then continue with the next byte, extract the length information from it, ...

Answer 2

First of all LOL for the question heading. I was in the same situation when I was a newbie. There is no tutorial online that provides you the exact code to read data from a Mifare classic card.

First understand the memory structure of the Mifare cards.

The memory of Mifare Classic divided into sectors, which are also divided into blocks of 16 bytes.

The MIFARE Classic 1K card has 16 sectors, each of which are divided into four blocks. If we do the math, we can figure out how the memory structure would be like: 16 bytes (1 block) * 4 blocks * 16 sectors = 1024 bytes.

The MIFARE Classic 4K card has 40 sectors, 32 of which are divided into four blocks and the remaining 8 are divided into 16 blocks. 16 bytes (1 block) * 4 blocks * 32 sectors + 16 bytes (1 block) * 16 blocks * 8 sectors = 4096 bytes. The memory structure is as follows:

The number on the blocks indicates its index. Each sector is protected by the site key written in the last block of the sector. For example, block 3 contains the site key for sector 1 and block 7 for sector 2. The last block in each sector also contains access conditions information such as “write”, “read” and “read & write”. The following figure demonstrates how the last block consists of:

Moreover, the data written in the card is binary i.e; 0 & 1.

Now, the steps you need to follow to read the data are:

step1: check whether the device support NFC or not.

step2: check if the device has NXP chip (especially for reading Mifare classic cards).

step3: instantiate the NFC manager and NFC adpater & define the techlist of card that you want to read.

step4: ask permission to access device NFC.

step5: create a intent to detect card and specify the MIME type you want to read(in most cases it is all MIME types).

step6: enable and disable foreground dispatch of adapter in onResume() and onPause() so that your app gets the priority to read the card when your activity is in foreground.

step7: When card comes in contact to device, you can get the tag information from intent.getParcelableExtra(NfcAdapter.EXTRA_TAG);

step8: read the card information i.e; card type, tech list etc..

step9: to read the data in the card you need to connect to the card via tag info retrieved above.

step10: iterate through all the sectors. Authenticate each sector with the default key //https://developer.android.com/reference/android/nfc/tech/MifareClassic.html#authenticateSectorWithKeyA(int,%20byte[])

step11: on successful authentication read the binary data in the blocks of each sector.

step12: convert the binary data to string data so that we can read it.

step13: That's all, do whatever you want to do with the data.

surprise! get the complete working code at my github repositiory here: https://github.com/codes29/RFIDReader

Note: I empathised how you feeling as a newbie and got this task where there is no proper tutorial for the same. So I updated my code that I wrote after a lot of struggle for days.

Here's the sample that you'll get after successful authentication and reading the data. The card that I scanned is empty as per now. But if there is data here then it'll surely be here instead of 0's.

Cheers! Happy coding bro!