Unable to start Docker Service in Ubuntu 16.04

Question

I've been trying to use Docker (1.10) on Ubuntu 16.04 but installation fails because Docker Service doesn't start. I've already tried to install docker by docker.io, docker-engine apt packages and curl -sSL https://get.docker.com/ | sh but it doesn't work.

My Host info is:

Linux Xenial 4.5.3-040503-generic #201605041831 SMP Wed May 4 22:33:50 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Here is systemctl status docker.service:

● docker.service - Docker Application Container Engine
   Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since sáb 2016-05-14 15:17:31 CEST; 12min ago
     Docs: https://docs.docker.com
  Process: 22479 ExecStart=/usr/bin/docker daemon -H fd:// (code=exited, status=1/FAILURE)
 Main PID: 22479 (code=exited, status=1/FAILURE)

may 14 15:17:30 Xenial docker[22479]: time="2016-05-14T15:17:30.103601523+02:00" level=info msg="New containerd process, pid: 22485\n"
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31.149064723+02:00" level=error msg="devmapper: Unable to delete device: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool"
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31.149127439+02:00" level=warning msg="devmapper: Usage of loopback devices is strongly discouraged for production use. Please use `--storage-opt dm.thinpooldev` or use `man docker` to refer to dm.thinpooldev section."
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31.153010028+02:00" level=error msg="[graphdriver] prior storage driver \"devicemapper\" failed: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool"
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31.153130839+02:00" level=fatal msg="Error starting daemon: error initializing graphdriver: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool"
may 14 15:17:31 Xenial systemd[1]: docker.service: Main process exited, code=exited, status=1/FAILURE
may 14 15:17:31 Xenial docker[22479]: time="2016-05-14T15:17:31+02:00" level=info msg="stopping containerd after receiving terminated"
may 14 15:17:31 Xenial systemd[1]: Failed to start Docker Application Container Engine.
may 14 15:17:31 Xenial systemd[1]: docker.service: Unit entered failed state.
may 14 15:17:31 Xenial systemd[1]: docker.service: Failed with result 'exit-code'.

Here is sudo docker daemon -D

DEBU[0000] docker group found. gid: 999                 
DEBU[0000] Listener created for HTTP on unix (/var/run/docker.sock) 
INFO[0000] previous instance of containerd still alive (23050) 
DEBU[0000] containerd connection state change: CONNECTING 
DEBU[0000] Using default logging driver json-file       
DEBU[0000] Golang's threads limit set to 55980          
DEBU[0000] received past containerd event: &types.Event{Type:"live", Id:"", Status:0x0, Pid:"", Timestamp:0x57372cae} 
DEBU[0000] containerd connection state change: READY    
DEBU[0000] devicemapper: driver version is 4.34.0       
DEBU[0000] devmapper: Generated prefix: docker-8:6-2101297 
DEBU[0000] devmapper: Checking for existence of the pool docker-8:6-2101297-pool 
DEBU[0000] devmapper: poolDataMajMin=7:0 poolMetaMajMin=7:1

DEBU[0000] devmapper: Major:Minor for device: /dev/loop0 is:7:0 
DEBU[0000] devmapper: Major:Minor for device: /dev/loop1 is:7:1 
DEBU[0000] devmapper: loadDeviceFilesOnStart()          
DEBU[0000] devmapper: Skipping file /var/lib/docker/devicemapper/metadata/transaction-metadata 
DEBU[0000] devmapper: loadDeviceFilesOnStart() END      
DEBU[0000] devmapper: constructDeviceIDMap()            
DEBU[0000] devmapper: constructDeviceIDMap() END        
DEBU[0000] devmapper: Rolling back open transaction: TransactionID=1 hash= device_id=1 
ERRO[0000] devmapper: Unable to delete device: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool 
WARN[0000] devmapper: Usage of loopback devices is strongly discouraged for production use. Please use `--storage-opt dm.thinpooldev` or use `man docker` to refer to dm.thinpooldev section. 
DEBU[0000] devmapper: Initializing base device-mapper thin volume 
DEBU[0000] devicemapper: CreateDevice(poolName=/dev/mapper/docker-8:6-2101297-pool, deviceID=1) 
DEBU[0000] devmapper: Error creating device: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool 
DEBU[0000] devmapper: Error device setupBaseImage: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool 
ERRO[0000] [graphdriver] prior storage driver "devicemapper" failed: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool 
DEBU[0000] Cleaning up old mountid : start.             
FATA[0000] Error starting daemon: error initializing graphdriver: devicemapper: Can't set task name /dev/mapper/docker-8:6-2101297-pool

Here is ./check-config.sh output:

warning: /proc/config.gz does not exist, searching other paths for kernel config ...
info: reading kernel config from /boot/config-4.5.3-040503-generic ...

Generally Necessary:
- cgroup hierarchy: properly mounted [/sys/fs/cgroup]
- apparmor: enabled and tools installed
- CONFIG_NAMESPACES: enabled
- CONFIG_NET_NS: enabled
- CONFIG_PID_NS: enabled
- CONFIG_IPC_NS: enabled
- CONFIG_UTS_NS: enabled
- CONFIG_DEVPTS_MULTIPLE_INSTANCES: enabled
- CONFIG_CGROUPS: enabled
- CONFIG_CGROUP_CPUACCT: enabled
- CONFIG_CGROUP_DEVICE: enabled
- CONFIG_CGROUP_FREEZER: enabled
- CONFIG_CGROUP_SCHED: enabled
- CONFIG_CPUSETS: enabled
- CONFIG_MEMCG: enabled
- CONFIG_KEYS: enabled
- CONFIG_MACVLAN: enabled (as module)
- CONFIG_VETH: enabled (as module)
- CONFIG_BRIDGE: enabled (as module)
- CONFIG_BRIDGE_NETFILTER: enabled (as module)
- CONFIG_NF_NAT_IPV4: enabled (as module)
- CONFIG_IP_NF_FILTER: enabled (as module)
- CONFIG_IP_NF_TARGET_MASQUERADE: enabled (as module)
- CONFIG_NETFILTER_XT_MATCH_ADDRTYPE: enabled (as module)
- CONFIG_NETFILTER_XT_MATCH_CONNTRACK: enabled (as module)
- CONFIG_NF_NAT: enabled (as module)
- CONFIG_NF_NAT_NEEDED: enabled
- CONFIG_POSIX_MQUEUE: enabled

Optional Features:
- CONFIG_USER_NS: enabled
- CONFIG_SECCOMP: enabled
- CONFIG_CGROUP_PIDS: enabled
- CONFIG_MEMCG_KMEM: missing
- CONFIG_MEMCG_SWAP: enabled
- CONFIG_MEMCG_SWAP_ENABLED: missing
    (note that cgroup swap accounting is not enabled in your kernel config, you can enable it by setting boot option "swapaccount=1")
- CONFIG_BLK_CGROUP: enabled
- CONFIG_BLK_DEV_THROTTLING: enabled
- CONFIG_IOSCHED_CFQ: enabled
- CONFIG_CFQ_GROUP_IOSCHED: enabled
- CONFIG_CGROUP_PERF: enabled
- CONFIG_CGROUP_HUGETLB: enabled
- CONFIG_NET_CLS_CGROUP: enabled (as module)
- CONFIG_CGROUP_NET_PRIO: enabled
- CONFIG_CFS_BANDWIDTH: enabled
- CONFIG_FAIR_GROUP_SCHED: enabled
- CONFIG_RT_GROUP_SCHED: missing
- CONFIG_EXT3_FS: missing
- CONFIG_EXT3_FS_XATTR: missing
- CONFIG_EXT3_FS_POSIX_ACL: missing
- CONFIG_EXT3_FS_SECURITY: missing
    (enable these ext3 configs if you are using ext3 as backing filesystem)
- CONFIG_EXT4_FS: enabled
- CONFIG_EXT4_FS_POSIX_ACL: enabled
- CONFIG_EXT4_FS_SECURITY: enabled
- Network Drivers:
  - "overlay":
    - CONFIG_VXLAN: enabled (as module)
- Storage Drivers:
  - "aufs":
    - CONFIG_AUFS_FS: missing
  - "btrfs":
    - CONFIG_BTRFS_FS: enabled (as module)
  - "devicemapper":
    - CONFIG_BLK_DEV_DM: enabled
    - CONFIG_DM_THIN_PROVISIONING: enabled (as module)
  - "overlay":
    - CONFIG_OVERLAY_FS: enabled (as module)
  - "zfs":
    - /dev/zfs: missing
    - zfs command: missing
    - zpool command: missing

If someone could please help me I would be very thankful

Answer 1

I had this issue today after an upgrade to the ubuntu kernel and tried numerous solutions above. However the only one that worked (Ubuntu 16.04.6 LTS) was to remove (or rename) the folder: /var/lib/docker

Please be aware, this will remove all your docker images, containers and volumes etc. So understand the implications before applying or take a backup!

There are more details here: https://github.com/docker/for-linux/issues/162

Answer 2

After viewing some of the other answers it looks like the issue was that the service wasn't running with the -s overlay options.

I also happened to notice that docker tried to start up with ${DOCKER_OPTS} at the end of the call.

I was able to export DOCKER_OPTS="-s overlay" (bc by default DOCKER_OPTS was empty) and get docker running.

Answer 3

I had the same problem after upgrade docker from 17.05-ce to 17.06-ce via docker-machine

1. Update /etc/systemd/system/docker.service.d/10-machine.conf

   replace

   `docker daemon` => `dockerd`
   

   example from

   [Service]
   ExecStart=
   ExecStart=/usr/bin/docker deamon -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --storage-driver aufs --tlsverify --tlscacert /etc/docker/ca.pem --tlscert /etc/docker/server.pem --tlskey /etc/docker/server-key.pem --label provider=generic
   Environment=
   

   to

   [Service]
   ExecStart=
   ExecStart=/usr/bin/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --storage-driver aufs --tlsverify --tlscacert /etc/docker/ca.pem --tlscert /etc/docker/server.pem --tlskey /etc/docker/server-key.pem --label provider=generic
   Environment=
   

2. flush changes by executing:

   sudo systemctl daemon-reload
   

3. restart docker:

   sudo systemctl restart docker
   

Answer 4

I had a similar issue on a new Docker installation (version 19.03.3-rc1) on Ubuntu 18.04.3 LTS. By default /etc/docker/daemon.json file does not exist on a new installation. Following a tutorial I changed the storage driver to devicemapper by creating a new daemon.json file. It worked but then I deleted the daemon.json file thinking that it would revert to the default but that did not work and the service would not start.

Creating the /etc/docker/daemon.json file again with the default storage driver fixed it for me.

{
    "storage-driver": "overlay2"
}