How to calculate the IP range when the IP address

Question

When a IP-Range is written as aaa.bbb.ccc.ddd/netmask (CIDR Notation) I need to calculate the first and the last included ip address in this range with C#.

Example:

Input: 192.168.0.1/25

Result: 192.168.0.1 - 192.168.0.126

Answer 1

I learned this shortcut from working at the network deployment position. It helped me so much, I figured I will share this secret with everyone. So far, I have not able to find an easier way online that I know of.

For example a network 192.115.103.64 /27, what is the range?

just remember that subnet mask is 0, 128, 192, 224, 240, 248, 252, 254, 255

255.255.255.255 11111111.11111111.11111111.11111111 /32

255.255.255.254 11111111.11111111.11111111.11111110 /31

255.255.255.252 11111111.11111111.11111111.11111100 /30

255.255.255.248 11111111.11111111.11111111.11111000 /29

255.255.255.240 11111111.11111111.11111111.11110000 /28

255.255.255.224 11111111.11111111.11111111.11100000 /27

255.255.255.192 11111111.11111111.11111111.11000000 /26

255.255.255.128 11111111.11111111.11111111.10000000 /25

255.255.255.0 11111111.11111111.11111111.00000000 /24

from /27 we know that (11111111.11111111.11111111.11100000). Counting from the left, it is the third number from the last octet, which equal 255.255.255.224 subnet mask. (Don't count 0, 0 is /24) so 128, 192, 224..etc

Here where the math comes in:

use the subnet mask - subnet mask of the previous listed subnet mask in this case 224-192=32

We know 192.115.103.64 is the network: 64 + 32 = 96 (the next network for /27)

which means we have .0 .32. 64. 96. 128. 160. 192. 224. (Can't use 256 because it is .255)

Here is the range 64 -- 96.

network is 64.

first host is 65.(first network +1)

Last host is 94. (broadcast -1)

broadcast is 95. (last network -1)

Answer 2

I'll just post the code:

IPAddress ip = new IPAddress(new byte[] { 192, 168, 0, 1 });
int bits = 25;

uint mask = ~(uint.MaxValue >> bits);

// Convert the IP address to bytes.
byte[] ipBytes = ip.GetAddressBytes();

// BitConverter gives bytes in opposite order to GetAddressBytes().
byte[] maskBytes = BitConverter.GetBytes(mask).Reverse().ToArray();

byte[] startIPBytes = new byte[ipBytes.Length];
byte[] endIPBytes = new byte[ipBytes.Length];

// Calculate the bytes of the start and end IP addresses.
for (int i = 0; i < ipBytes.Length; i++)
{
    startIPBytes[i] = (byte)(ipBytes[i] & maskBytes[i]);
    endIPBytes[i] = (byte)(ipBytes[i] | ~maskBytes[i]);
}

// Convert the bytes to IP addresses.
IPAddress startIP = new IPAddress(startIPBytes);
IPAddress endIP = new IPAddress(endIPBytes);

Answer 3

You might already know this, but to check that you're getting this stuff right have a look at http://www.subnet-calculator.com/ - you can see there how the bits represent the network and host portions of the address.

Answer 4

I know this is an older question, but I found this nifty library on nuget that seems to do just the trick for me:

http://nuget.org/packages/TakeIo.NetworkAddress/

Answer 5

my good friend Alessandro have a nice post regarding bit operators in C#, you should read about it so you know what to do.

It's pretty easy. If you break down the IP given to you to binary, the network address is the ip address where all of the host bits (the 0's in the subnet mask) are 0,and the last address, the broadcast address, is where all the host bits are 1.

For example:

ip 192.168.33.72 mask 255.255.255.192

11111111.11111111.11111111.11000000 (subnet mask)
11000000.10101000.00100001.01001000 (ip address)

The bolded parts is the HOST bits (the rest are network bits). If you turn all the host bits to 0 on the IP, you get the first possible IP:

11000000.10101000.00100001.01000000 (192.168.33.64)

If you turn all the host bits to 1's, then you get the last possible IP (aka the broadcast address):

11000000.10101000.00100001.01111111 (192.168.33.127)

So for my example:

the network is "192.168.33.64/26":
Network address: 192.168.33.64
First usable: 192.168.33.65 (you can use the network address, but generally this is considered bad practice)
Last useable: 192.168.33.126
Broadcast address: 192.168.33.127

Answer 6

Invert mask (XOR with ones), AND it with IP. Add 1. This will be the starting range. OR IP with mask. This will be the ending range.