Why does installing Nokogiri on Mac OS fail with l

Question

I've been trying to install Nokogiri on Mac OS 10.9.3 and whatever I try, the install fails in the end with the following error message:

$ sudo gem install nokogiri -- --with-xml2-include=/usr/local/Cellar/libxml2/2.9.1/include/libxml2 --with-xml2-lib=/usr/local/Cellar/libxml2/2.9.1/lib --with-xslt-dir=/usr/local/Cellar/libxslt/1.1.28 --with-iconv-include=/usr/local/Cellar/libiconv/1.14/include --with-iconv-lib=/usr/local/Cellar/libiconv/1.14/lib
Building native extensions with: '--with-xml2-include=/usr/local/Cellar/libxml2/2.9.1/include/libxml2 --with-xml2-lib=/usr/local/Cellar/libxml2/2.9.1/lib --with-xslt-dir=/usr/local/Cellar/libxslt/1.1.28 --with-iconv-include=/usr/local/Cellar/libiconv/1.14/include --with-iconv-lib=/usr/local/Cellar/libiconv/1.14/lib'
This could take a while...
Building nokogiri using packaged libraries.
ERROR:  Error installing nokogiri:
    ERROR: Failed to build gem native extension.

    /System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby extconf.rb --with-xml2-include=/usr/local/Cellar/libxml2/2.9.1/include/libxml2 --with-xml2-lib=/usr/local/Cellar/libxml2/2.9.1/lib --with-xslt-dir=/usr/local/Cellar/libxslt/1.1.28 --with-iconv-include=/usr/local/Cellar/libiconv/1.14/include --with-iconv-lib=/usr/local/Cellar/libiconv/1.14/lib
Building nokogiri using packaged libraries.
checking for iconv.h... yes
checking for iconv_open() in iconv.h... no
checking for iconv_open() in -liconv... no
checking for libiconv_open() in iconv.h... no
checking for libiconv_open() in -liconv... no
-----
libiconv is missing.  please visit http://nokogiri.org/tutorials/installing_nokogiri.html for help with installing dependencies.
-----
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of necessary
libraries and/or headers.  Check the mkmf.log file for more details.  You may
need configuration options.

Provided configuration options:
    --with-opt-dir
    --without-opt-dir
    --with-opt-include
    --without-opt-include=${opt-dir}/include
    --with-opt-lib
    --without-opt-lib=${opt-dir}/lib
    --with-make-prog
    --without-make-prog
    --srcdir=.
    --curdir
    --ruby=/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby
    --help
    --clean
    --use-system-libraries
    --enable-static
    --disable-static
    --with-zlib-dir
    --without-zlib-dir
    --with-zlib-include
    --without-zlib-include=${zlib-dir}/include
    --with-zlib-lib
    --without-zlib-lib=${zlib-dir}/lib
    --enable-cross-build
    --disable-cross-build


Gem files will remain installed in /Library/Ruby/Gems/2.0.0/gems/nokogiri-1.6.2.1 for inspection.
Results logged to /Library/Ruby/Gems/2.0.0/gems/nokogiri-1.6.2.1/ext/nokogiri/gem_make.out

After following a lot of help found around the web including building and installing libxml2 and libxslt using brew and building libiconv from the sources (as described in "Installing Nokogiri"), the error remains the same.

When trying to run the installation for Nokogiri, libxml2 and libxslt seem to be found fine, but not libiconv.

Anyone with a better knowledge of these things know how to get Nokogiri installed?

Answer 1

I'm using.. OS X 10.9.4 Homebrew 0.9.4

Here is my summery from this thread to successfully install nokogiri, fixing missing libiconv.

Install Homebrew http://brew.sh/ Or update to latest using command below

brew update

Install libxml2 libxslt

brew install libxml2 libxslt

Link both libxml2 libxslt

brew link libxml2 libxslt

If you get warning to use --force, just use command below

brew link --force libxml2 libxslt

Install xCode command tools to enable you to install libiconv

xcode-select --install

Install libiconv

wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.1.tar.gz
tar xvfz libiconv-1.13.1.tar.gz
cd libiconv-1.13.1
./configure --prefix=/usr/local/Cellar/libiconv/1.13.1
make
sudo make install

Final step, install nokogiri!

gem install nokogiri -- --with-xml2-include=/usr/local/Cellar/libxml2/2.8.0/include/libxml2 --with-xml2-lib=/usr/local/Cellar/libxml2/2.8.0/lib --with-xslt-dir=/usr/local/Cellar/libxslt/1.1.26 --with-iconv-include=/usr/local/Cellar/libiconv/1.13.1/include --with-iconv-lib=/usr/local/Cellar/libiconv/1.13.1/lib

Answer 2

libiconv was removed from Homebrew 0.9 Now it's recommended to compile libiconv from source, then reference the install when you install the nokogiri gem. See the Nokogiri install instructions under the Homebrew 0.9 section on the Nokogiri install page

Answer 3

I was finally able to solve this problem. None of the above solutions completely fixed it for me.

I was getting this error when trying to gem install nokogiri on OSX Lion 10.7.2. First of all, this error masks the real problem by saying libiconv is missing, because you will get the same error even if nokogiri can't find libxslt or libxml2, which in my case, it couldn't.

So I followed the instructions on http://nokogiri.org/tutorials/installing_nokogiri.html under the Homebrew section (slightly modified to account for a more current version of libxml2):

brew install libxml2
brew link libxml2

# install libxslt from source
wget ftp://xmlsoft.org/libxml2/libxslt-1.1.26.tar.gz
tar -zxvf libxslt-1.1.26.tar.gz
cd libxslt-1.1.26
./configure --prefix=/usr/local/Cellar/libxslt/1.1.26 --with-libxml-prefix=/usr/local/Cellar/libxml2/2.7.8
make
sudo make install

At this point I followed the directions on the nokogiri site and tried

gem install nokogiri -- --with-xslt-dir=/usr/local/Cellar/libxslt/1.1.26

However, this still failed because when building libxslt from source, it installs the /include folder in a funky place. So you need to specify the lib and include folders separately like so:

gem install nokogiri -- --with-xslt-lib=/usr/local/Cellar/libxslt/1.1.26/lib --with-xslt-include=/usr/local/Cellar/libxslt/1.1.26/include/libxslt

This still didn't work (same libiconv error), so I tried to specify all three required libraries (libxslt, libxml2 and libiconv):

gem install nokogiri -- --with-xslt-lib=/usr/local/Cellar/libxslt/1.1.26/lib --with-xslt-include=/usr/local/Cellar/libxslt/1.1.26/include/libxslt --with-iconv-dir=/usr/local/Cellar/libiconv/1.14 --with-xml2-dir=/usr/local/Cellar/libxml2/2.7.8

Now I got a different error! It was still an error but at least it was different. The make process failed with:

in /opt/local/lib/libz.1.dylib, file was built for unsupported file format which is not the architecture being linked (x86_64) for architecture x86_64

Uhh, what? After a lot of googling, I came across this miracle post: http://www.refresherate.com/2010/01/08/fixing-ld-warning-in-usrlocalliblibz-dylib-file-is-not-of-required-architecture/

Apparently OSX Lion ships with some bad versions of the libz library (libz.dylib, libz.1.dylib, libz.1.2.4.dylib) and and they need to be replaced with the latest versions from the Xcode SDK. The article explains it better than I can so read the above link for specific instructions.

Once these were replaced, I ran

gem install nokogiri -- --with-xslt-lib=/usr/local/Cellar/libxslt/1.1.26/lib --with-xslt-include=/usr/local/Cellar/libxslt/1.1.26/include/libxslt --with-iconv-dir=/usr/local/Cellar/libiconv/1.14 --with-xml2-dir=/usr/local/Cellar/libxml2/2.7.8

again and all was well. I hope this helps someone else.

Answer 4

I tried many things but nothing worked for me. Then I finally found the iconv documentation and it saved my day!

Answer 5

gem install nokogiri -v '1.6.6.2' -- --use-system-libraries --with-xml2-include=$(brew --prefix libxml2)/include/libxml2

this worked for me on macos

Answer 6

I had a similar issue and the accepted answer used to work for me. Now, however I have been seeing a new error message where a gmkdir command is missing as in this question:

gem install nokogiri -v '1.5.11' failed due to make: /usr/local/bin/gmkdir: No such file or directory

What worked for me was first a little cleanup:

brew uninstall libiconv
brew uninstall libxml2
brew uninstall libxslt

And then brew unlink libiconv and whatever else you need to unlink (check with brew doctor). Then, the magic two lines (copied from the linked answer):

brew install coreutils
gem install nokogiri