Configure apache on elastic beanstalk

Question

I'm developing with django on elastic beanstalk and I want to make two changes to apache configuration:

1. redirect www.domain.com to domain.com

2. redirect http://domain.com to https://domain.com

I don't have experience with apache configuration, googling it gave me the idea that I should put RewriteRules in .htaccess file.

example: How to force https on amazon elastic beanstalk without failing the health check

I couldn't find instructions on how to do it with elastic beanstalk configuration (.ebextensions), I tried to simply put a .htaccess file in my root filder and deploy but it didn't work.

Does anyone know how it's possible to add the RewriteRules in elastic beanstalk?

Answer 1

Having www.example.com go to example.com can be done with a CNAME in DNS if you don't care about having it actually being a redirect. If you need a redirect, you can add it to the Apache config below. The primary point of this answer is to detail how you modify Apache config on Elastic Beanstalk (because doing this properly is not very straight forward).

This answer assumes you have already enabled https in the load balancer security group, added the SSL certificate to the load balancer, added 443 to the ports forwarded by the load balancer, and pointed your domain name at the Elastic Beanstalk environment with Route 53 (or equivalent DNS service).

All you need to do is add the following to one of your .conf files in the .ebextensions directory of your project:

files:
    "/etc/httpd/conf.d/ssl_rewrite.conf":
        mode: "000644"
        owner: root
        group: root
        content: |
            RewriteEngine On
            <If "-n '%{HTTP:X-Forwarded-Proto}' && %{HTTP:X-Forwarded-Proto} != 'https'">
            RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [R,L]
            </If>

Explanation

This is moderately straight forward outside of Elastic Beanstalk. One usually adds an Apache rewrite rule like the following:

RewriteCond %{HTTPS} off
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}

Or, if behind a load balancer, like we are in this case:

RewriteCond %{HTTP:X-Forwarded-Proto} !https
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [R,L]

However, these configurations only work within a <VirtualHost> block. Changing the RewriteCond to an <If> block allows it to work properly outside of a <VirtualHost> block, allowing us to put in in a standalone Apache config file. Note that standard Apache setup on CentOS (including the setup on ElasticBeanstalk) inculdes all files matching /etc/httpd/conf.d/*.conf, which matches the file path where we are storing this file.

The -n '%{HTTP:X-Forwarded-Proto}' part of the condition prevents it from redirecting if you are not behind a load balancer, allowing you to have shared configuration between a production evironment with a load balancer and https, and a staging environment that is single instance and does not have https. This is not necessary if you are using load balancers and https on all of your environments, but it doesn't hurt to have it.

Bad solutions I have seen

I have seen a lot of bad solutions to this problem, and it is worth going through them to understand why this solution is necessary.

1. Use Cloudfront: Some people suggest using non-cached Cloudfront setup in front of Elastic Beanstalk to do the HTTP to HTTPS redirect. This adds a whole new service (thus adding complexity) that isn't exactly appropriate (Cloudfront is a CDN; it's not the right tool for forcing HTTPS on inherantly dynamic content). Apache config is the normal solution to this problem and Elastic Beanstalk uses Apache, so that's the way we should go.

2. SSH into the server and...: This is completely antithetical to the point of Elastic Beanstalk and has so many problems. Any new instances created by autoscaling won't have the modified configuration. Any cloned environments won't have the configuration. Any number of a reasonable set of environment changes will wipe out the configuration. This is just such a bad idea.

3. Overwrite the Apache config with a new file: This is getting into the right realm of solution but leaves you with a maintenance nightmare if Elastic Beanstalk changes aspects of the server setup (which they very well may do). Also see the problems in the next item.

4. Dynamically edit the Apache config file to add a few lines: This is a decent idea. The problems with this is that it won't work if Elastic Beanstalk ever changes the name of their default Apache config file, and that this file can get overwritten when you least expect: https://forums.aws.amazon.com/thread.jspa?threadID=163369

Answer 2

Just for reference for others, using Zags' solution to redirect non-www to www, add this to your .ebextensions/your_file.config:

files:
    "/etc/httpd/conf.d/www_rewrite.conf":
        mode: "000644"
        owner: root
        group: root
        content: | 
            RewriteEngine On
            <If "'%{HTTP_HOST}' !~ /^www\./">
            RewriteRule ^(.*)$ http://www.%{HTTP_HOST}%{REQUEST_URI} [R=301,L]
            </If>

Answer 3

this is an easy solution

1. ssh into your EC2 instance
2. copy the contents of /etc/httpd/conf.d/wsgi.conf into a local file called wsgi.conf which will be placed in the base folder of your application

3. Edit the local version of wsgi.conf and add the following redirect rules within the < VirtualHost> < /VirtualHost> tags

   RewriteEngine On
   RewriteCond %{HTTP:X-Forwarded-Proto} !https
   RewriteRule !/status https://%{SERVER_NAME}%{REQUEST_URI} [L,R=301]
   

4. Change the “/status” to whatever page you are using as a health check page.

5. Save the file

6. Edit your < app>.conf file inside your .ebextensions directory to add a container command to copy this version of wsgi.conf over Amazon’s version

   container_commands:
   01_syncdb:
     command: "django-admin.py syncdb --noinput" leader_only: true
   02_collectstatic:
     command: "django-admin.py collectstatic --noinput"
   03_wsgireplace:
     command: 'cp wsgi.conf /etc/httpd/conf.d/wsgi.conf'
   ...
   

7. Deploy the code.

8. The deployed version of wsgi.conf at /etc/httpd/conf.d/wsgi.conf will now include the necessary redirect rules.

It should work and the file will be properly updated for each deployment. The only thing to watch for is if Amazon changes their base wsgi.conf file contents in the future, then your copy may no longer work.

Source : rickchristianson