How to split a string value based on a delimiter i

Question

How do you split a string value in DB2?

For example, given the value:

CHG-FFH.

I want to split on the dash (-), which would result in two values:

CHG 
FFH. 

I tried using split function but it is not a function in DB2.

Any help will be appreciated.

Answer 1

Short answer:

You need to find the position of the delimiter, and then substring before and after it.

SELECT 
    SUBSTR('CHG-FFH', 1,LOCATE('-','CHG-FFH')-1) as FIRST_PART
  , SUBSTR('CHG-FFH', LOCATE('-','CHG-FFH')+1)   as SECOND_PART
FROM SYSIBM.SYSDUMMY1;

Long answer:

DB2, along with other relational databases do not provide a single function to accomplish this.

The reason is likely that it's not an implicitly scalar function. If your string had more than one dash in it, would you want to split it into three parts? Four? So the first step is to note if your data is determinate - if it has a specific number of components that you want to split apart. In your example, you have two, so I'll start with that assumption, and then afterwards comment on how you would deal other situations.

Scenario: A string value with two components separated by a delimiter

With only two parts, you need to find the position of the delimiter, and then substring before and after it by using the position before and after it in a substring function.

1. LOCATE the index of your delimiter.

LOCATE('-','CHG-FFH')

NOTE: DB2 provides two functions which can be used for this: POSITION (or POSSTR), and LOCATE (or LOCATE_IN_STRING). LOCATE is a bit more powerful because it allows you to specify a start position, which would be helpful if you had more than one delimiter.

2. SUBSTR using the delimiter index.

For the first part, start your substring at position 1, up to the character before the delimiter (delimiter position - 1):

SUBSTR('CHG-FFH', 1,LOCATE('-','CHG-FFH')-1) as FIRST_PART

For the second part, start your substring at the position after delimiter index (delimiter position + 1), and get the rest of the String:

 SUBSTR('CHG-FFH', LOCATE('-','CHG-FFH')+1) as SECOND_PART

Final Result:

SELECT 
    SUBSTR('CHG-FFH', 1,LOCATE('-','CHG-FFH')-1) as FIRST_PART
  , SUBSTR('CHG-FFH', LOCATE('-','CHG-FFH')+1) as SECOND_PART
FROM SYSIBM.SYSDUMMY1;

Scenario: A string value with three components separated by a delimiter

Use the same concepts as the first scenario, but you have to determine the index of the second delimiter. Use the index of the first delimiter to specify a starting point: Note that LOCATE allows specifying a start position:

>>-LOCATE(search-string,source-string-+--------+-+--------------------+-)-><
                                      '-,start-' '-,--+-CODEUNITS16-+-'     
                                                      +-CODEUNITS32-+       
                                                      '-OCTETS------' 

Finding the second delimiter:

Use the position of the first delimiter as the starting point for finding the second delimiter.

LOCATE('-','CHG-FFH-EEE', LOCATE('-','CHG-FFH-EEE')+1)

Use that as a SUBSTR point for the second and third values, and you're all set. Note: For the second value, you have to use both of the delimiter locations to substring the value.

Final Result:

SELECT 
    SUBSTR('CHG-FFH-EEE', 1,LOCATE('-','CHG-FFH-EEE')-1) as FIRST_PART
  , SUBSTR('CHG-FFH-EEE', LOCATE('-','CHG-FFH-EEE')+1, LOCATE('-','CHG-FFH-EEE', LOCATE('-','CHG-FFH-EEE'))-1) as SECOND_PART
  , SUBSTR('CHG-FFH-EEE', LOCATE('-','CHG-FFH-EEE', LOCATE('-','CHG-FFH-EEE')+1)+1) as THIRD_PART
FROM SYSIBM.SYSDUMMY1;

You can see this strategy would get out of hand for a greater number of delimiters in your String.

Scenario: Indeterminate number of delimiters

This is a tricky problem that is best approached with a Stored Procedure. Think through things like: How do you want the parsed data to come out of the algorithm, how will you access the data? Arrays are not a native type in SQL, but they are in Stored Procedures, so what will you do with the array when you've parsed all the pieces out of your String?

One way to approach this scenario is answered here:

Split a VARCHAR in DB2 to retrieve a value inside

Answer 2

I know this is old post.. but thought following may help others.

I used following approach to split the given string.

SELECT TRIM(ITEM) AS ITEM FROM TABLE(<LIB1>.SF_SPLIT(I_INPUTLIST=>'AA|BB|CC|DD|EE|EE|FF', I_DELIMITER=>'|')) AS T;

SF_SPLIT is the User defined SQL function and below is definition:

CREATE OR REPLACE FUNCTION <LIB1>.SF_SPLIT(

    I_INPUTLIST VARCHAR(8000) 
  , I_DELIMITER VARCHAR(3)    

) 
RETURNS TABLE (ITEM VARCHAR(8000))

LANGUAGE SQL

RETURN

WITH R1 (ITEM, REMINDER) AS 

(SELECT SUBSTR(I_INPUTLIST, 1, LOCATE(I_DELIMITER, I_INPUTLIST)-1) AS ITEM, 

SUBSTR(I_INPUTLIST, LOCATE(I_DELIMITER, I_INPUTLIST)+1, LENGTH(I_INPUTLIST)) REMINDER

FROM SYSIBM.SYSDUMMY1

UNION ALL

SELECT SUBSTR(REMINDER, 1, LOCATE(I_DELIMITER, REMINDER)-1) AS ITEM, 
SUBSTR(REMINDER, LOCATE(I_DELIMITER, REMINDER)+1, LENGTH(REMINDER)) REMINDER 

FROM R1 WHERE LOCATE(I_DELIMITER, REMINDER) > 0

UNION ALL

SELECT SUBSTR(REMINDER, LOCATE(I_DELIMITER, REMINDER)+1, LENGTH(REMINDER)) AS ITEM,

'' AS REMINDER FROM R1 WHERE REMINDER <> '' AND LOCATE(I_DELIMITER, REMINDER) = 0

)

SELECT ITEM FROM R1;

Answer 3

This is what i tried and it fetched me effective result. Hence sharing with all.

select column_name, substr(column_name,1,locate('-',column_name)-1), 
substr(column_name,locate('-',column_name)+1,
length(substr(column_name,locate('-',column_name)+1))) from 
table_name where column_name is not null and column_name!='' 
and column_name like '%-%'

Answer 4

In DB2

SELECT
'11,222,33,444' AS THE_F_STRING
, SUBSTR('11,222,33,444', 1, LOCATE_IN_STRING('11,222,33,444',',',1,1)-1) AS AA
, SUBSTR('11,222,33,444', LOCATE_IN_STRING('11,222,33,444',',',1,1)+1, LOCATE_IN_STRING('11,222,33,444',',',1,2)-LOCATE_IN_STRING('11,222,33,444',',',1,1)-1) AS BB 
, SUBSTR('11,222,33,444', LOCATE_IN_STRING('11,222,33,444',',',1,2)+1, LOCATE_IN_STRING('11,222,33,444',',',1,3)-LOCATE_IN_STRING('11,222,33,444',',',1,2)-1) AS CC
, SUBSTR('11,222,33,444', LOCATE_IN_STRING('11,222,33,444',',',1,3)+1, LENGTH('11,222,33,444')-LOCATE_IN_STRING('11,222,33,444',',',1,3)) AS DD
FROM SYSIBM.SYSDUMMY1;

Keep extrapolating...enjoy...

Answer 5

If you are sure that each substrings are 3 characters long you can try this code, provided that TABLE1 is a table where there is at least X rows (X = 10 in this example):

select rc, substr(string_to_split, (rc-1)*3+rc, 3) as result from
    (select row_number() over() as rc from TABLE1 fetch first 10 rows only) TB_rowcount
    cross join
    (select 'CHG-FFH' as string_to_split from sysibm.sysdummy1) T2
    where substr(string_to_split, (rc-1)*3+rc, 3) <> '   '

If the length of the substrings are not the same you have to apply LOCATE function to find the separator

Answer 6

I needed to use instr, substr, trim, and messed with locate as well.. but instr, and substr are all supported. You can find a pattern. I had to go through a varchar split with ' - ' and needed to find the end and go back from there.

           select  itn, 
           substr(Message, 1 , locate(' - ', Message)) FIRST_SSR,  
           SUBSTR(Message , instr( message, ' - ', octets)+1, (instr( 
            message, '(Ref', octets)+1)) SECOND_STR ,
           Message
              from
         (
   select p.itn itn, 
          substr(p.msg,  instr( p.msg, ' - ' , octets)+21) Message
    from itnpad p
    where p.msg like '%MR - Multiple Requests%'

       ) A