可以将文章内容翻译成中文,广告屏蔽插件可能会导致该功能失效(如失效,请关闭广告屏蔽插件后再试):
问题:
Even if I create a clean WinForms project, Edit and Continue doesn't work and gives me the error:
Changes are not allowed when the debugger has been attached to an already running process or the code being debugged was optimized at build or run time.
- Edit and Continue option is checked in Tools → Options → Debugging.
- Optimization is not enabled.
- Seems like there is no any managed profiler set up.
- I am running in Debug mode
- I am running on x64 CPU and Windows XP 32-bit, but setting platform target to x86 rather than AnyCpu doesn't help.
- Repairing Visual Studio installation doesn't help.
I also found this article on MSDN website:
Unsupported Scenarios
Edit and Continue is not available in the following debugging scenarios:
Debugging on Windows 98.
Mixed-mode (native/managed) debugging.
SQL debugging.
Debugging a Dr. Watson dump.
Editing code after an unhandled exception, when the "Unwind the call stack on unhandled exceptions" option is not selected.
Debugging an embedded runtime application.
Debugging an application with Attach to rather than running the application with Start from the Debug menu.
Debugging optimized code.
Debugging managed code when the target is a 64-bit application. If you want to use Edit and Continue, you must set the target to x86. (Project Properties, Compile tab, Advanced Compiler setting.).
Debugging an old version of your code after a new version failed to build due to build errors.
But I can answer "No" to every item in this list.
It worked before, but several days ago it stopped working, and I don't know what could be the reason.
回答1:
I finally got to solve the problem: UNINSTALL Gallio
Gallio seems to have quite some many rough edges and it's better to not use MbUnit 3.0 but use the MbUnit 2.0 framework but use the gallio runner, that you are running without installing from the installer (which also installed a visual studio plugin).
Incidentally, I had the issue even after "disabling" he Gallio plugin. Only the uninstall solved the problem.
PS. Edited by nightcoder:
In my case disabling TypeMock Isolator (mocking framework) finally helped! Edit & Continue now works!!!
Here is the answer from TypeMock support:
After looking further into the edit
and continue issue, and conversing
about it with Microsoft, we reached
the conclusion it cannot be resolved
for Isolator. Isolator implements a
CLR profiler, and according to our
research, once a CLR profiler is
enabled and attached, edit and
continue is automatically disabled.
I'm sorry to say this is no longer
considered a bug, but rather a
limitation of Isolator.
回答2:
Applicable Solutions
Here is an incomplete, unordered list of possible solutions to try if you* want to fix Edit&Continue quickly:
- Make sure you are in Debug Mode
- Make sure you're not launching a mixed mode process
- Try to set the CPU target to x86 rather than AnyCPU (on x64 machines)
- Uncheck the Optimize Code checkbox for Debug Mode in Project Properties->Debug
- Uncheck Enable Optimizations in Advanced Compiler Settings
- (ASP.NET) Check nightcoder's answer if it is the case
- (ASP.NET) Check this answer (by matrixugly) if it is the case
- (ASP.NET) Ensure you have Edit and Continue enabled on the Web tab (vs2010)
- (ASP.NET) Go to Properties > Web > Servers, and make sure that Enable and continue is checked under Use Visual Studio Development Server.
- (ASP.NET WebAPI) Make sure you've stopped in the Controller's method using a breakpoint, before trying to edit it.
- Go to Tools > Options > Debugging > General and make sure Require source files to exactly match the original version is unchecked.
- Are you using Microsoft Fakes? It inhibits Edit & Continue.
- Kill all the *.vshost.exe instances by selecting End Process Tree in the Task Manager. VS will regenerate a correct instance.
- Remove all the breakpoints with Debug->Delete All Breakpoints
- Enable and Continue exists in both the Tools > Options > Debugging menu and also in the Project Settings. Be sure to check both places. edit & Continue is not supported with the extended Intellitrace setting.
- Be sure Debug Info in Project Properties > Build > Advanced > Output > Debug Info is set to Full
- Some plugin may be interfering. Check by disabling/uninstalling and then trying again the other solutions.
- If you're not paying enough attention, the error you get while trying to fix this may change to something else that is easier to diagnose. E.g. A method containing a lambda expression cannot support edit and continue.
Make sure the System variable COR_ENABLE_PROFILING
is not set to 1
. Some profilers set this when installing and leave it like that after uninstalling. Open a command prompt and type set
to quickly check it your system is affected, if so remove the variable or set it to 0
:
- In Windows 8 and above, search for System (Control Panel).
- Click the Advanced system settings link.
- Click Environment Variables.
- Remove
COR_ENABLE_PROFILING
Be aware of unsupported scenarios (as reported in the question) and that unsupported edits.
* by 'you', I mean the visitor of the page who is hammering his head on a keyboard to find The solution.
Feel free to edit this answer if you have other tips!
回答3:
If you're debugging an ASP.NET application, go to properties > web > Servers, and make sure that "enable and continue" is checked under Use Visual Studio Development Server.
回答4:
I had the same problem. I even re-installed VS 2008 but the problem did not go away. However, when I deleted all the break points then it started to work.
Debug->Delete All Breakpoints
I think it was happening because I had deleted an aspx page that had break points in its code, and then I created another page with the same name. This probably confused the VS 2008.
回答5:
Couple of things to check
- Make sure your compile is set to Debug vs. Release
- Make sure you're not launching a mixed mode process
- If on a 64 bit machine Make sure to set the CPU target to x86 rather than AnyCPU
EDIT
I don't believe this should matter but make sure that the hosting process is enabled for the target platform. Probably won't help.
If it repros for new projects then it might be something even more subtle. I would try the following.
- Backup HKCU:\Software\Wow6432Node\VisualStudio\9.0 (maybe just rename it)
- Delete the same key
- Try the repro again
回答6:
If your concern is with an ASP.NET app, ensure you have edit and continue enabled on the web tab (vs2010). There was also a separate setting for ASP.NET debugging in earlier versions.
Regards,
Adam.
回答7:
None of the above solutions worked for me(running on a 64x machine).
Finally I clicked on 'advanced compiler settings'
and UNCHECKED 'enable optimizations
' and I can now step through code and edit while debugging.
回答8:
I found that even though under project properties build & debug tab are set to Debug and all the other setting are correct I still get the message, however after digging some more
under the Build menu select Configurations Manager... and make sure Debug is selected in two places there as well. go figure...how many different places do they need to set debug?????? even though you set Project - Configuration to Debug then under Build - Manager it is not changed so you have change the same setting there as well Project Configuration - seems like a microsoft issue again.......
回答9:
This problem is due to Intellitrace setting
If Intellitrace is enabled make sure Intellitrace event only is checked
Otherwise this will not allow edit and continue..
If you will click on Intellitrace options you will see the warnings.
回答10:
For me, for a reason that I don't understand, the setting "Generate debug info" in the "Advanced Compiler Settings" was set to "pdb-only" instead of "Full".
By default, this parameter is always set to "Full" but a mysterious poltergeist has changed this parameter on last night. :)
P.S. I'm in Visual Basic .Net with Visual Studio 2010
回答11:
Following shooting helped me using VS2010:
go to Tools, Options, Debugging, General and make sure "Require source files to exactly match the original version" is unchecked.
回答12:
That happens when the debugger hasn't hit a breakpoint or you haven't hit Break All (pause). It couldn't be that simple could it?
回答13:
I had this problem in Microsoft Visual Studio 2008 and the solution is easy. when you run your project please set in "Debug" mode not "Release". The another people solution can be useful.
回答14:
"Edit and Continue", when enabled, will only allow you to edit code when it is in break-mode: e.g. by having the execution paused by an exception or by hitting a breakpoint.
This implies you can't edit the code when the execution isn't paused! When it comes to debugging (ASP.NET) web projects, this is very unintuitive, as you would often want to make changes between requests. At this time, the code your (probably) debugging isn't running, but it isn't paused either!
To solve this, you can click "Break all" (or press Ctrl+Alt+Break). Alternatively, set a breakpoint somewhere (e.g. in your Page_Load
event), then reload the page so the execution pauses when it hits the breakpoint, and now you can edit code. Even code in .cs
files.
回答15:
The error says a possible cause is: "the code being debugged was optimized at build or run time". Go to Project Properties->Debug and uncheck the Optimize Code box for Debug mode.
回答16:
If I create a new project, edits while debugging do not work. If I create a new website, edits while debugging work as expected.
回答17:
Some things that seemed to help using VS2010:
- go to Tools, Options, Debugging, General and make sure "Require source files to exactly match the original version" is unchecked.
- multiple .vshost.exe instances can be left over from e.g. detaching the VS debugger from a stopped process. This will interfere with breakpoints and compiles as well. Use Task Manager, Processes tab to kill all instances of .vshost.exe by right-clicking each instance and selecting End Process Tree. VS will create a new instance.
回答18:
I removed a dataset from my project because I didn't use it. After that I could modify the program when debugging.
回答19:
I did all the changes mentioned in every other answer and none worked. What did I learn? Enable and Continue exists in both the Tools > Options > Debugging menu and also in the Project settings. After I checked both, Enable and Continue worked for me.
回答20:
I ran into this today - turns out that having Debug Info set to pdb-only (or none, I'd imagine) will prevent Edit and Continue from working.
Make sure your Debug Info is set to "full" first!
Project Properties > Build > Advanced > Output > Debug Info
回答21:
what worked for me was unchecking "Use Managed Compatibility Mode" under
Tools -> Options -> Debugging
TBN: checking or unchecking "Require source file to exactly match the original version" seems not influences the E&C
Hope this can help.
回答22:
In my case just reseting to default debugger settings and setting IntelliTrace-> only intellytrace events helps
回答23:
embed interop types visual studio should be set to false
回答24:
I had this happen in a linked class file. The rest of the project allowed E&C, but I got the same error editing the linked file. Solution was to break linked file into it's own project and reference the project.
回答25:
I faced the same problem. My problem was that I could modify a file, but not another (both are in same project). Later I found that the file I couldn't modify was also part of another project. That another project (Unit Test) wasn't loaded, and intelligent VS debugger shows the error that assembly for this given file was not loaded, and changes aren't allowed. How weird!
Hence, I had to unload the unit-test project and continue the EnC debugging.
回答26:
I had a database project in the solution which stopped the webforms project from being editted.
I clicked "Unload" on the database project and everything now works sweetly.
回答27:
For VS2017 it can help to remove the .suo file in your solution, it worked for me. :)
回答28:
I was facing the same problem in Visual Studio 2005. My configuration is 64 bits. It was working fine on one of the VS solution but not the other. I noticed i only enabled "Enable edit and continue" for the project where i wanted to make changes in debug mode. This finally solved for me when I selected "Enable and Continue" for my start up project as well.
There was no configuration changes except the enable and continue needed.
回答29:
Seems illogic, but only way was disabling edit and continue from VS 2017 options... Then AspNet edit and continue began to work...
回答30:
Enable edit and Continue only work run IIS Express.
Don't work in Local ISS or External Host.