A VirtualBox machine with the name 'homestead&

问题:

Since homestead 2.0 homestead laravel has not been working

I don't know why 'homestead init' creates a Homestead.yaml file in mydirectory/.homestead and not in the project directory. Homestead up OR Vagrant up create the following message

A VirtualBox machine with the name 'homestead' already exists.

Bringing machine 'default' up with 'virtualbox' provider...
==> default: Importing base box 'laravel/homestead'...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'laravel/homestead' is up to date...
A VirtualBox machine with the name 'homestead' already exists.
Please use another name or delete the machine with the existing
name, and try again.

回答1:

I solved by using vboxmanage to get the ID of the VM.

$ vboxmanage list vms
"my-vm" {c700b8b6-b766-4638-871b-736b44b7db18}

Copy the ID of the desired VM (the c700…db18 string) into the contents of ~/.vagrant/machines/default/virtualbox/id. Save the file then run vagrant up to get the vm working without having to destroy it.

回答2:

For me, the machine was not showing up as an active VM in the VirtualBox application. To fix I had to do this:

vagrant global-status

This gave me the ID of the machine that I needed to destroy. With the ID, run:

vagrant destroy {VM ID}

I had to run that in sudo to actually destroy the machine. At that point, I was able to run

vagrant up

回答3:

You probably have a virtualbox running! Open the programme virtualbox and shut down the other virtualbox ;) http://smallbusiness.chron.com/shut-down-virtualbox-43657.html

If this isn't working then you might want to delete the old homestead folder and place all your projects in the new folder ;)

回答4:

From the following message :

A VirtualBox machine with the name 'vm_name' already exists. Please use another name or delete the machine with the existing name, and try again.

I listed current running virtual machines from the command line :

vboxmanage list vms

Result :

"vm_name" {8ba467b7-da96-4f68-9bf8-671dd6f0d007}

Then proceeded with the removal of the offending virtual machine :

VBoxManage unregistervm 8ba467b7-da96-4f68-9bf8-671dd6f0d007 --delete

回答5:

I solved this editing /Homestead_folder/scripts/homestead.rb

Seek for vb.name = settings["name"] = "homestead" line and changed homestead to HOMESTEAD and "vói lá" that worked for me.

回答6:

I'm a bit late to the party on this, but for anyone else having this issue SergioPeluzzi came closest, but didn't get the cigar with this:

Seek for vb.name = settings["name"] = "homestead" line and changed "homestead" to "HOMESTEAD" and "vói lá"

The line is actually:

vb.name = settings["name"] ||= "homestead"

As you can see from the bit that says settings["name"], you just need to add a name field to your Homestead YAML file, e.g.

memory: 2048
cpus: 1
provider: virtualbox
name: my-sexy-homestead-box

回答7:

I had an old .vagrant directory in my project which was causing the error :)

If this doesn't fix it for you i would suggest opening VirtualBox and removing all VirtualBoxes and trying again.

回答8:

I had same issue today. Spend few hours to find the solution. If by any reason you can't find the list of exiting virtual machines then type in terminal

sudo virtualbox

This will run Virtual Box in GUI. You should see the the full list of VMs and from there you'd be able to manage them. Typing "virtualbox" only won't show anything. You need to be root (administrator).

Thanks to mightyspaj for the tip.

回答9:

I opened the virtualBox and then deleted homestead vm that was created earlier. It helped.

回答10:

I was receiving the same error message, even after running "homestead destory", and "vagrant destroy". Same as you, I was using the VirtualBox provider, vagrant, and homestead. Here's what I did:

1. Opened VirtualBox GUI. I see "homestead" as a VM, but I cannot remove it, button is greyed out.
2. I logged out of my OS, logged back in and re-opened VirtualBox. Status is now "aborted" and i'm able to remove.
3. There were some residual files in ~/VirtualBox\ VMs/homestead, so i ran rm -r /Users/gabriel/VirtualBox\ VMs/homestead
4. I am now able to run "homestead up"

回答11:

Open VirtualBox GUI. See for your VM and remove it. It solved my problem.

回答12:

I edited Homestead.yaml and add new name for it

ip: "192.168.10.10"
memory: 2048
cpus: 4
provider: virtualbox
name: my-new-homestead-box-name

回答13:

Sometimes you might not want to delete old box. Yesterday may old Vagrant has broken, I've updated Vagrant and Virtualbox but folders mapping didn't work. I wanted to run new box and had this error.

I didn't want to remove old box (because I wanted to run some backups) but I wanted to run new box. The solution was running VirtualBox, right click on Homestead machine and choose Settings and then changing name from homestead to homestead_old.

After that I was able to install homestead but had this old machine and could also run this to make any backups I needed.

回答14:

If you are a Windows User, make sure you delete C:\Users\<Username>\VirtualBox VMs\homesteadfolder. Because if there is still a folder named homestead, the action of vagrant up will not be completed

回答15:

If you want to keep keep your machine, without destroying and recreating following steps should solve your problem. (I work on OS X El Captain, Vagrant 1.8.1)

Run homestead in debug mode

homestead --debug up

Look for something like in the output:

INFO machine: Initializing machine: default INFO machine: - Provider: VagrantPlugins::ProviderVirtualBox::Provider INFO machine: - Box: # INFO machine: - Data dir: /Users/YOUR_HOME_DIR/Workspace/Homestead/.vagrant/machines/default/virtualbox

Data dir, is the path which is interesting for you.

Then vboxmanage list vms

"homestead" {0e8438b9-4a67-4fb1-80cb-2c62cf04ab5c} "settler_default_1447385930122_73498_1474294682778_13108" {93ecb93f-f159-4406-a384-5312b4d3ab34}

Edit id file, in the path which you found out in the previous command

vi /Users/YOUR_HOME_DIR/Workspace/Homestead/.vagrant/machines/default/virtualbox/id

Replace content of that file, with the id of the VM you want to fix, in this scenario it is

0e8438b9-4a67-4fb1-80cb-2c62cf04ab5c

Now try

homestead up

VM should start booting. It might work, or you might have issues with ssh authentication

default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
default: Warning: Authentication failure. Retrying...     default: Warning: Authentication failure. Retrying...

To fix that do following Check Homestead SSH config

homestead ssh-config

You should get something like

Host default HostName 127.0.0.1 User vagrant Port 2222
UserKnownHostsFile /dev/null StrictHostKeyChecking no
PasswordAuthentication no
IdentityFile "/Users/pryznar/.vagrant.d/insecure_private_key"
IdentitiesOnly yes LogLevel FATAL

Edit IdentityFile file

/Users/YOUR_HOME_DIR/.vagrant.d/insecure_private_key

Check Homestead.yml

cat /Users/YOUR_HOME_DIR/.homestead/Homestead.yaml

Then copy path to the file under the key keys, and copy private key from that file

cat ~/.homestead/ssh/id_rsa

Last step is to replace private key in /Users/YOUR_HOME_DIR/.vagrant.d/insecure_private_key with the one you just copied

Now try rung homestead again, should work.

homestead up

I got some warnings, but so far it works without issues

==> default: Warning: Using a password on the command line interface can be insecure. ==> default: ERROR 1045 (28000): Access denied for user 'homestead'@'localhost' (using password: YES) The SSH command responded with a non-zero exit status. Vagrant assumes that this means the command failed. The output for this command should be in the log above. Please read the output to determine what went wrong.

回答16:

None of this worked for me. I was using an old dev machine

I attempted:

1. vagrant global-status > destroy any by id which you don't need or match what is conflicting

2. open virtualbox and remove + delete files for any which you don't need or are conflicting

What worked:

• locate your ~/.vagrant/machines/ or ~/.vagrant.d/boxes folder. In my case, it contained the conflicting vm and also a bunch of old left over vm machines which steps 1 & 2 did not remove for some reason.

• after clearing these, everything worked fine again, finally!

回答17:

vagrant box list

vagrant box remove laravel/homestead

vagrant global-status

vagrant destroy nameOfYourBox

Open your VirtualBox and delete all itens of your homestead

vagrant up

回答18:

In my case the following article provide the solution. There was a folder named homestead inside the path /var/root/VirtualBox VMs/ that was causing the issue. Once this folder was removed, rm -r homestead, the issue was resolved. If you can not see or have access to this path execute the following commands in your terminal windows:

$ sudo -s 
$ cd /var/root/VirtualBox\ VMs

And proceed to delete the homestead folder.

回答19:

You can open the VirtualBox GUI and remove the conflicting virtual machine.

回答20:

I had the following error:

Error:

A VirtualBox machine with the name 'homestead-7' already exists.
Please use another name or delete the machine with the existing
name, and try again.

Solution:

• Find the VirtualBox VMS folder, in my case it was in ~/VirtualBox VMs
• List the elements in the folder with ls command, and review if the virtual machine is there
• Delete the folder with the name of the machine, in my case homestead-7
• Re-execute the vagrant up command in the homestead folder

That's all, I hope it's helpful, that was my solution.

Regards!

回答21:

After a few hours of troubleshooting, nothing else worked for me, as no one mentioned this little detail.

Depending on your privileges at the time of installation, you may need to run virtualbox as an administrator. It was only when I did this that I saw my vagrant boxes in the list of virtual machines.

I then proceeded to remove my virtual machine named homestead from virtualbox, and the problem was solved.

回答22:

If you're using homestead in Windows, just open up your Oracle VM VirtualBox and delete the homestead VM.

回答23:

The Vagrant relies on VirtualBox (if that's the default provider) so it checks for existing environment first before provisioning your VM.

It is executing the following command:

VBoxManage list vms

and when it finds the VM with the same hostname, so it'll fail.

You can debug it by:

vagrant --debug up

to find out the exact reason.

---

Solution

If you're planning to use multiple VMs in different folders, then you need to change your config.vm.hostname (possibly config.vm.provider(name) as well) in your Vagrantfile to make it unique. Or simply remove it, so Vagrant will assign a different name for each VM.

If that's not the case, simply shutdown and unregister previous VM which conflicts by running:

VBoxManage controlvm NAMEOFVM poweroff
VBoxManage unregistervm NAMEOFVM --delete

and re-run your vagrant up.

If it fails on directory rename (because you missed --delete), then rename or remove the destination folder, for example:

rm -fr ~/"VirtualBox VMs/NAMEOFVM"

and re-try again.

---

This problem may be related to: GitHub issue #2969 - vagrant up not detecting a previously run VM

回答24:

In my case, nothing was indicating that the VM "already exists" besides that error message. Nothing on VirtualBox UI, nothing returned by “vboxmanage list vms”, nothing through “vagrant global-status”, it didn’t exist in “.vagrant.d\boxes” and so on. I resolved it by manually creating a new same-name VM in the VM VirtualBox Manager (using the “new” button + accepting all the defaults), and then removing it (right-click > remove). After that, the “vagrant up” worked as expected.

回答25:

I had the same issue today. Windows 10. I recently had updated Homestead, so the error was probably because of that. I tried it all, destroy, up, delete folders, whatever. Whenever I tried to run vagrant up, it was showing this kind of errors. The solution? After updating, I noticed that Homestead is now naming the boxes by the project folder name, and Homestead.yaml has all that infos. I just run that Homestead Windows configuration vendor\\bin\\homestead make and later them a vagrant up (before making sure it was all clean) and voilá, looks like the machine is booting now. =) Try that if you need it.

回答26:

Add --force after box, and before your given name.

回答27:

Renaming an already existing default VM

Disclaimer

The following procedure will destroy your VM and may be only suiteable in a desting-environment like mine! For production environments, consider to repair the association like described here

I had this problem after overriding the default name of an already existing VM by using

Vagrant.configure("2") do |config|
  config.vm.define :ubuntu_test

where the VirtualBox name was also set (as a newbie I assumed that Vagrand will use this name too)

config.vm.provider "virtualbox" do |vb|
     vb.name = "Ubuntu-Test"
end

By adding config.vm.define it seems that Vagrant doesn't associate the VirtualBox VM any more with the Vagrant file since even vagrant destroy -f say VM not created but vagrant up throw this error

A VirtualBox machine with the name 'Ubuntu-Test' already exists.

To delete those zombie VM

1. If the VM is running, stop it first: vboxmanage shutdown <VMName> (Here the name is Ubuntu-Test)
2. Get the Id by running vboxmanage list vms
3. Delete it: vboxmanage unregistervm <Id> --delete
4. Now your VM can be re-created using vagrant up
5. Using vagrant global-status --prune, your new name is present

回答28:

For me id file was present in the below-mentioned location. D:\drupalvm.vagrant\machines\drupalvm\virtualbox

回答29:

None of the above ended up working for me. My final solution was to:

cd ~/.composer/vendor/laravel/homestead/.vagrant/machines;
rm -R default;
cd /var/www/path/to/project;
homestead up;