Adb won't start

问题:

Running Vista, tried starting adb from shell as admin get daemon not running starting it now

ADB server didn\'t ACK
* failed to start daemon *

Any help for this?

回答1:

This problem has annoyed me for a long time. In addition to the above answer, use these tips:

• Create a bat file with the following and run it. This bat file will solve most of your adb problems.

tskill adb

cd \\tools\\

adb kill-server

adb start-server

ddms

• Use the command netstat to monitor the state of connections (adb uses 5037)

• If the bat file doesn\'t work try: disconnect-reboot phone-connect. (hint: use `adb reboot\' if adb is responding at all, if not do it the old fashioned way)

• Sometimes Windows can be funny. Reboot the machine.

• Turn on USB Debugging Mode

  • Download the Android SDK and unzip
  • Uninstall all \"Android *\" from Device Manager
  • Do an \"Add Hardware\" from Control Panel, choosing \"Install the hardware... (Advanced)\"
  • Select \"Android USB Devices\" and click \"Next\"
  • Click \"Have Disk\" and enter the path where the SDK was unzipped

• Still not working ? Factory reset the phone.

• MTP detection delays ADB. Sometimes you if need boot time logs you may have to disable the MTP driver in Device Manager (Windows)

---

This is a brilliant patch for adb when you get the error :

Adb connection Error:An existing connection was forcibly closed by the remote \"

回答2:

I was unable to use adb. I got the following error, both on the command line and in eclipse.

* daemon not running. starting it now on port 5037 *
ADB server didn\'t ACK<br>
* failed to start daemon *

That is, adb start-server failed even after rebooting. To diagnose the problem, I found that you can run adb with the following arguments:

adb nodaemon server

And it will print out the reason that it cannot run. In my case, it was a blank line in the adb_usb.ini file.

回答3:

You may have a stuck copy of the adb daemon in memory. Try removing it with Task Manager, or reboot, and see if that helps.

回答4:

For whoever is using Android Studio and MAC. This is what worked for me:

1. In Android Studio: Tools -> Android -> Uncheck \"Enable ADB Integration\"
2. In terminal: \"adb kill-server\"
3. In Android Studio: Tools -> Android -> Check \"Enable ADB Integration\"
4. In terminal: \"adb start-server\"

回答5:

The top answer is Windows-specific but this has a decent amount of Google visibility, so if you\'re running a *nix-like machine (I\'m on a Mac), the steps are similar:

$ killall adb
$ cd <PATH_TO_SDK>/platform-tools/
$ adb kill-server
$ adb start-server

Or, if you\'re like me and just want to access adb no matter your current directory, add

export PATH=${PATH}:<PATH_TO_SDK>/platform-tools/

to your ~/.bash_profile.

回答6:

> killall adb

> adb start-server

Restart Eclipse.

Basically adb is running on another process on your box, and you need to kill it, and start up the daemon again, since they\'re both trying to bind to the same port (:5037). In my case, I had another window open to :5037, and forgot about it. Wondered why I couldn\'t stop and start as usual. By going \"killall\" you make sure you\'re terminating all processes. You can also go into the CPU\'s processes and force quit.

回答7:

I found solution like:

Follow step:

1. Open task manager
2. find process adb.exe
3. stop or end it.
4. Run your project.

回答8:

1.$ apt-get remove android-tools-adb

2.$ cd $PATH_TO_SDK/platform-tools/

3.$ ./adb devices

You will see like this:

• daemon not running. starting it now on port 5037 * cannot bind \'tcp:5037\' ADB server didn\'t ACK * failed to start daemon *

That show what errors.

Now you reset you PC, it will well.

Or

# lsof -i:5037

COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME

wineserve 3609 root 268u IPv4 20118 0t0 TCP localhost:5037 (LISTEN)

# 

You will know which software use the port.

回答9:

To avoid this simply change the following values in your host_config.xml:

<!-- Number of tests executed between reboots. A value <= 0 disables reboots. -->
<IntValue name=\"maxTestCount\" value=\"10000\" />
<!-- Max size [tests] for a package to be run in batch mode. -->
<IntValue name=\"maxTestsInBatchMode\" value=\"100000\" />

<!-- Max time [ms] between test status updates. -->
<IntValue name=\"testStatusTimeoutMs\" value=\"600000\" />

回答10:

adb nodaemon server

helps. In my case, I had edited ~/.android/adb_usb.ini, and added 0x1949 at the end to enable debugging on the Kindle Fire. Sadly, it could not handle the newline(s) I put in after the 0x1949

回答11:

I had the same problem. I had improperly edited my adb_usb.ini file (I had two carriage returns at the end of the file...yes this was hard to find.)

This file is located somewhere similar to /Users/{user-name}/.android/adb_usb.ini

(replace {user-name} with your own user name)

Make sure the file reads EXTACTLY (No spaces/carriage returns/line breaks before or after):

\'# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.\"
\'# USE \'android update adb\' TO GENERATE.\"
\'# 1 USB VENDOR ID PER LINE.\"

(IMPORTANT!!! There are no \' (apostrophes) in the actual file, this was the only way for me to post this without it interpreting the # for BOLD).

---

Hope that helps someone

回答12:

If you\'re using Android Studio, if

• you have the \"Device chooser\" dialog open
• you try to run \"adb devices\" from your command line

it leads every single time to the following error

adb server is out of date.  killing...
cannot bind \'tcp:5037\'
ADB server didn\'t ACK
* failed to start daemon *
error:

SOLUTION (easy and quick)

Close the \"Device chooser\" dialog. My guess is that it tries to take over the adb connection in a.. very intensive way.

回答13:

I\'m facing this issue with Genymotion, so I\'ve replaced it\'s adb with my current adb. For reference:

cd $GENYMOTION_HOME\\tools
mv adb adb-old
ln -s $ANDROID_SDK\\platform-tools\\adb adb

回答14:

There is yet another possibility. If you have installed any permission managers, like Advanced android permission manager , the adb may fail.It was my case. Uninstalled the app and then no issues.

回答15:

It seem are the same, but sometime, the command adb kill-server have no effect (at least is in my case). So, i have tried other way.

You can check this way: https://stackoverflow.com/a/34627522/5597864

回答16:

In a console, try:

taskkill /F /T /IM adb.exe

Do this many times, until it says ERROR: The process \"adb.exe\" not found. Then

adb devices

回答17:

The adb server is not running. you can open the command line window in Windows to check which process is using the 5037 port, remember the process number.

netstat -ano |findstr \"5037\"

Then use the Ctrl+alt+delete to open the process manager to kill the process which is possessing the 5037 port. You maybe need to try this several times until the 5037 port is free to use.

回答18:

Open Command Navigate your adb.exe file where is located Reach into the file on command adb kill-server adb start-server

回答19:

When it additionally says that adb server is out of date. killing... it kills it for you. The problem is it restarts as soon as was killed.

So you should consider finding the adb.exe wherever it could be. The simplest way to do that is opening a Task Manager, finding an adb.exe process -> RMB -> Open file location -> delete it from there. Unless it\'s not needed, in this case you should update it. In my case it was in C:\\Windows\\ and came with their Visual Studio.

回答20:

If you are getting the error cannot bind \'tcp:5037\' and you are using any Linux distribution such as Ubuntu,

Kill old ADB process:

fuser -n tcp -k 5037

This will kill the adb process at port 5037 and then,

Start ADB:

adb start-server

回答21:

On A Mac or Unix

For those of you coming here with on Mac or Unix, the following worked for me:

adb kill-server
adb server