可以将文章内容翻译成中文,广告屏蔽插件可能会导致该功能失效(如失效，请关闭广告屏蔽插件后再试):

问题:

I plan to split my monolthic server up into many small docker containers but haven't found a good solution for "inter-container communication" yet. This is my target scenario:

I know how to link containers together and how to expose ports, but none of these solutions are satisfying to me.

Is there any solution to communicate via hostnames (container names) between the containers like in a traditional server network?

回答1:

Edit: After Docker 1.9, the docker network command (see below https://stackoverflow.com/a/35184695/977939) is the recommended way to achieve this.

My solution is to set up a dnsmasq on the host to have DNS record automatically updated: "A" records have the names of containers and point to the IP addresses of the containers automatically (every 10 sec). The automatic updating script is pasted here:

#!/bin/bash

# 10 seconds interval time by default
INTERVAL=${INTERVAL:-10}

# dnsmasq config directory
DNSMASQ_CONFIG=${DNSMASQ_CONFIG:-.}

# commands used in this script
DOCKER=${DOCKER:-docker}
SLEEP=${SLEEP:-sleep}
TAIL=${TAIL:-tail}

declare -A service_map

while true
do
    changed=false
    while read line
    do
        name=${line##* }
        ip=$(${DOCKER} inspect --format '{{.NetworkSettings.IPAddress}}' $name)
        if [ -z ${service_map[$name]} ] || [ ${service_map[$name]} != $ip ] # IP addr changed
        then
            service_map[$name]=$ip
            # write to file
            echo $name has a new IP Address $ip >&2
            echo "host-record=$name,$ip"  > "${DNSMASQ_CONFIG}/docker-$name"
            changed=true
        fi
    done < <(${DOCKER} ps | ${TAIL} -n +2)

    # a change of IP address occured, restart dnsmasq
    if [ $changed = true ]
    then
        systemctl restart dnsmasq
    fi

    ${SLEEP} $INTERVAL
done

Make sure your dnsmasq service is available on docker0. Then, start your container with --dns HOST_ADDRESS to use this mini dns service.

Reference: http://docs.blowb.org/setup-host/dnsmasq.html

回答2:

The new networking feature allows you to connect to containers by their name, so if you create a new network, any container connected to that network can reach other containers by their name. Example:

1) Create new network

$ docker network create <network-name>

2) Connect containers to network

$ docker run --net=<network-name> ...

$ docker network connect <network-name> <container-name>

3) Ping container by name

docker exec -ti <container-name-A> ping <container-name-B> 

64 bytes from c1 (172.18.0.4): icmp_seq=1 ttl=64 time=0.137 ms
64 bytes from c1 (172.18.0.4): icmp_seq=2 ttl=64 time=0.073 ms
64 bytes from c1 (172.18.0.4): icmp_seq=3 ttl=64 time=0.074 ms
64 bytes from c1 (172.18.0.4): icmp_seq=4 ttl=64 time=0.074 ms

See this section of the documentation;

Note: Unlike legacy links the new networking will not create environment variables, nor share environment variables with other containers.

This feature currently doesn't support aliases

回答3:

That should be what --link is for, at least for the hostname part.
With docker 1.10, and PR 19242, that would be:

docker network create --net-alias=[]: Add network-scoped alias for the container

(see last section below)

That is what Updating the /etc/hosts file details

In addition to the environment variables, Docker adds a host entry for the source container to the /etc/hosts file.

For instance, launch an LDAP server:

docker run -t  --name openldap -d -p 389:389 larrycai/openldap

And define an image to test that LDAP server:

FROM ubuntu
RUN apt-get -y install ldap-utils
RUN touch /root/.bash_aliases
RUN echo "alias lds='ldapsearch -H ldap://internalopenldap -LL -b
ou=Users,dc=openstack,dc=org -D cn=admin,dc=openstack,dc=org -w
password'" > /root/.bash_aliases
ENTRYPOINT bash

You can expose the 'openldap' container as 'internalopenldap' within the test image with --link:

 docker run -it --rm --name ldp --link openldap:internalopenldap ldaptest

Then, if you type 'lds', that alias will work:

ldapsearch -H ldap://internalopenldap ...

That would return people. Meaning internalopenldap is correctly reached from the ldaptest image.

Of course, docker 1.7 will add libnetwork, which provides a native Go implementation for connecting containers. See the blog post.
It introduced a more complete architecture, with the Container Network Model (CNM)

That will Update the Docker CLI with new “network” commands, and document how the “-net” flag is used to assign containers to networks.

docker 1.10 has a new section Network-scoped alias, now officially documented in network connect:

While links provide private name resolution that is localized within a container, the network-scoped alias provides a way for a container to be discovered by an alternate name by any other container within the scope of a particular network.
Unlike the link alias, which is defined by the consumer of a service, the network-scoped alias is defined by the container that is offering the service to the network.

Continuing with the above example, create another container in isolated_nw with a network alias.

$ docker run --net=isolated_nw -itd --name=container6 -alias app busybox
8ebe6767c1e0361f27433090060b33200aac054a68476c3be87ef4005eb1df17

--alias=[]

Add network-scoped alias for the container

You can use --link option to link another container with a preferred alias

You can pause, restart, and stop containers that are connected to a network. Paused containers remain connected and can be revealed by a network inspect. When the container is stopped, it does not appear on the network until you restart it.

If specified, the container's IP address(es) is reapplied when a stopped container is restarted. If the IP address is no longer available, the container fails to start.

One way to guarantee that the IP address is available is to specify an --ip-range when creating the network, and choose the static IP address(es) from outside that range. This ensures that the IP address is not given to another container while this container is not on the network.

$ docker network create --subnet 172.20.0.0/16 --ip-range 172.20.240.0/20 multi-host-network

$ docker network connect --ip 172.20.128.2 multi-host-network container2
$ docker network connect --link container1:c1 multi-host-network container2

回答4:

EDIT : It is not bleeding edge anymore : http://blog.docker.com/2016/02/docker-1-10/

Original Answer
I battled with it the whole night. If you're not afraid of bleeding edge, the latest version of Docker engine and Docker compose both implement libnetwork.

With the right config file (that need to be put in version 2), you will create services that will all see each other. And, bonus, you can scale them with docker-compose as well (you can scale any service you want that doesn't bind port on the host)

Here is an example file

version: "2"
services:
  router:
    build: services/router/
    ports:
      - "8080:8080"
  auth:
    build: services/auth/
  todo:
    build: services/todo/
  data:
    build: services/data/

And the reference for this new version of compose file: https://github.com/docker/compose/blob/1.6.0-rc1/docs/networking.md

回答5:

As far as I know, by using only Docker this is not possible. You need some DNS to map container ip:s to hostnames.

If you want out of the box solution. One solution is to use for example Kontena. It comes with network overlay technology from Weave and this technology is used to create virtual private LAN networks for each service and every service can be reached by service_name.kontena.local-address.

Here is simple example of Wordpress application's YAML file where Wordpress service connects to MySQL server with wordpress-mysql.kontena.local address:

wordpress:                                                                         
  image: wordpress:4.1                                                             
  stateful: true                                                                   
  ports:                                                                           
    - 80:80                                                                      
  links:                                                                           
    - mysql:wordpress-mysql                                                        
  environment:                                                                     
    - WORDPRESS_DB_HOST=wordpress-mysql.kontena.local                              
    - WORDPRESS_DB_PASSWORD=secret                                                 
mysql:                                                                             
  image: mariadb:5.5                                                               
  stateful: true                                                                   
  environment:                                                                     
    - MYSQL_ROOT_PASSWORD=secret

回答6:

I just found the Tumtum Blog and stumbled upon this paragraph in the official Docker documentation. I don't know whether I had missed this paragraph all the time or whether it was newly added but that should be exactly what I need :)