socket.error:[errno 99] cannot assign requested ad

问题:

My server software says errno99: cannot assign requested address while using an ip address other than 127.0.0.1 for binding.

But if the IP address is 127.0.0.1 it works. Is it related to namespaces?

I am executing my server and client codes in another python program by calling execfile(). I am actually editing the mininet source code.I edited net.py and inside that I used execfile('server.py') execfile('client1.py') and execfile('client2.py').So as soon as "sudo mn --topo single,3" is called along with the creation of 3 hosts my server and client codes will get executed.I have given my server and client codes below.

#server code
import select 
import socket 
import sys 
backlog = 5 
size = 1024 
server = socket.socket(socket.AF_INET, socket.SOCK_STREAM) 
server.bind(("10.0.0.1",9999)) 
server.listen(backlog) 
input = [server] 
running = 1 
while running: 
    inputready,outputready,exceptready = select.select(input,[],[]) 
    for s in inputready: 
        if s == server: 
            client, address = server.accept() 
            input.append(client)
        else: 
            l = s.recv(1024)
            sys.stdout.write(l)
server.close()

#client code
import socket
import select
import sys
import time
while(1) :
    s,addr=server1.accept()    
    data=int(s.recv(4))
    s = socket.socket()
    s.connect(("10.0.0.1",9999))
    while (1):
        f=open ("hello1.txt", "rb")
        l = f.read(1024)
        s.send(l)
        l = f.read(1024)
        time.sleep(5)
s.close()

回答1:

Stripping things down to basics this is what you would want to test with:

import socket
server = socket.socket() 
server.bind(("10.0.0.1", 6677)) 
server.listen(4) 
client_socket, client_address = server.accept()
print(client_address, "has connected")
while 1==1:
    recvieved_data = client_socket.recv(1024)
    print(recvieved_data)

This works assuming a few things:

1. Your local IP address (on the server) is 10.0.0.1 (This video shows you how)
2. No other software is listening on port 6677

Also note the basic concept of IP addresses:

Try the following, open the start menu, in the "search" field type cmd and press enter. Once the black console opens up type ping www.google.com and this should give you and IP address for google. This address is googles local IP and they bind to that and obviously you can not bind to an IP address owned by google.

With that in mind, you own your own set of IP addresses. First you have the local IP of the server, but then you have the local IP of your house. In the below picture 192.168.1.50 is the local IP of the server which you can bind to. You still own 83.55.102.40 but the problem is that it's owned by the Router and not your server. So even if you visit http://whatsmyip.com and that tells you that your IP is 83.55.102.40 that is not the case because it can only see where you're coming from.. and you're accessing your internet from a router.

In order for your friends to access your server (which is bound to 192.168.1.50) you need to forward port 6677 to 192.168.1.50 and this is done in your router. Assuming you are behind one.

If you're in school there's other dilemmas and routers in the way most likely.

回答2:

Try like this: server.bind(("0.0.0.0", 6677))