BTLE 4.0 - ConnectBlue Low Energy Serial Port Serv

问题:

I am looking for a way to load data from an embedded device via a serial port (RS232) to an iPhone. The app needs to be on the AppStore and our company is not part of the MFI program.

Before you say, it can't be done, we are looking into Bluetooth Low Energy 4.0 as a possible solution. We can create a device that can turn ConnectBlue's OBS421 module into a serial port adapter (with the speed bursts limitation). To that effect, connectBlue provides their own protocol called Serial Port Service, but it is documented only on a very high level.

1. Does anyone have any experience in using this protocol? If so, can you provide an example(objective C) code that establishes communication in this way?
2. Has anyone submitted an app to Apple that does this without getting rejected for infringing MFI rules?

One more question.. The device I am trying to connect only supports serial commands in the EZII Escape Computer Command Set standard (PROG ID of "EZ2 2.0" and higher). They look different than the common ATT-Commands. Example: <ESC>Gc100<EOT>. Any idea if I can send such commands via ConnectBlue's LE-SPS?

Your help is much appreciated. Thank you!

回答1:

I haven't used this protocol but from the documentation it seems quite straight-forward. You should be able to take any of the core-bluetooth examples and adapt it fairly quickly.

You need to look for a peripheral that is offering service 0x2456e1b926e28f83e744f34f01e9d701

This service exposes two characteristics -

• 0x2456e1b926e28f83e744f34f01e9d703 to read & write to the serial port
• 0x2456e1b926e28f83e744f34f01e9d704 for "credits" if you need flow control. Essentially it seems that this value indicates the number of bytes you can send to the device and you can write a value to indicate the number of bytes you are prepared to receive from the device

The device should support a full 8-bit data path, so I don't see why you would have a problem sending the serial commands.

Bluetooth Low Energy is specifically excluded from the MFI program, so you won't get rejected on that basis -

I want to develop an accessory that communicates with an Apple device using only Bluetooth Low Energy. Do I need to join the MFi Program?

No. Accessories which connect to an Apple device using only Bluetooth Low Energy/BTLE/Bluetooth 4.0 or standard Bluetooth profiles supported by iOS are not part of the MFi Program.

回答2:

Bluetooth Low Energy does not have a SPP defined as a standard protocol. You have to program it yourself using the GATT service/characteristics, you just need to generate your own 128bit UUID (google it, there are plenty of UUID generators and even on Mac or Linux it's easy to generate from command prompt)

GATT sends smaller chunks of data which you would have to concatenate yourself in the other end.

Be aware that the throughput of BLE is quite low compared to Bluetooth Classic SPP. Maybe around 3kbytes/sec.