nginx - nginx: [emerg] bind() to [::]:80 failed (9

2019-01-08 03:15发布

站内文章 / 移动开发
44 0 0

问题:

All of a sudden I am getting the below nginx error

 * Restarting nginx
 * Stopping nginx nginx
   ...done.
 * Starting nginx nginx
nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
nginx: [emerg] still could not bind()
   ...done.
   ...done.

If I run 

lsof -i :80 or sudo fuser -k 80/tcp

I get nothing. Nothing on port 80

Then I run the below:

sudo netstat -pan | grep ":80"
tcp        0      0 127.0.0.1:8070          0.0.0.0:*               LISTEN      15056/uwsgi     
tcp        0      0 10.170.35.97:39567      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39564      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39584      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39566      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39571      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39580      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39562      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39582      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39586      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39575      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39579      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39560      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39587      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39591      10.158.58.13:8080       TIME_WAIT   -               
tcp        0      0 10.170.35.97:39589      10.158.58.13:8080       TIME_WAIT   -

I am stumped.

How to a debug?

I am using uwsgi with a

proxy pass on port 8070. uwsgi is running. Nginx is not. I am using ubuntu 12.4

Below are the relevant portions of my nginx conf file

upstream uwsgi_frontend {
          server 127.0.0.1:8070;
        }
server {
listen 80;
        server_name 127.0.0.1;
        location = /favicon.ico {
                  log_not_found off;
                }



                location / {
                       include uwsgi_params;
                       uwsgi_buffering off;

                       uwsgi_pass 127.0.0.1:8070;
                 }
        }

Here is how I install nginx on ubuntu 12.04

nginx=stable;add-apt-repository ppa:nginx/$nginx;
apt-get update
apt get install nginx-full

回答1:

[::]:80 is a ipv6 address.

This error can be caused if you have a nginx configuration that is listening on port 80 and also on port [::]:80.

I had the following in my default sites-available file:

listen 80;
listen [::]:80 default_server;

You can fix this by adding ipv6only=on to the [::]:80 like this:

listen 80;
listen [::]:80 ipv6only=on default_server;

For more information, see:

http://forum.linode.com/viewtopic.php?t=8580

http://wiki.nginx.org/HttpCoreModule#listen



回答2:

i fixed this by running sudo apachectl stop - turns out apache was running in the background and prevented nginx from starting on the desired port.

On ubuntu run sudo /etc/init.d/apache2 stop



回答3:

I found the issue that I never had before.

I just had to delete /etc/nginx/sites-available/default. Then it worked.

My conf was in /etc/nginx/default.



回答4:

I was also getting the same error. nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) and when i typed the localhost in the browser, then i was getting

It works!

This is the default web page for this server.

The web server software is running but no content has been added, yet. instead of nginx welcome page, apache2 is running on the same port,

  1. find the apache2 ports.conf file

    sudo /etc/apache2/ports.conf

  2. change the port other then 80 , i make it as 70

  3. save the file

  4. restart your system

it will works for you also, if you type the localhost in the browser , you will get nginx welcome page



回答5:

My case is different, I had to kill running Nginx to restart it.

Instead of

sudo systemctl restart nginx

I had to use:

sudo pkill -f nginx
sudo systemctl start nginx


回答6:

I had the same problem in letsencrypt (certbot) and nginx,

ref: https://github.com/certbot/certbot/issues/5486

this error does not have a solution yet

so, a changed a cron for renew (putting a reload after renew) (using suggest from certbot)

-- in /etc/cron.d/certbot
from
0 */12 * * * root test -x /usr/bin/certbot -a \! -d /run/systemd/system && perl -e 'sleep int(rand(3600))' && certbot -q renew 
to
0 */12 * * * root test -x /usr/bin/certbot -a \! -d /run/systemd/system && perl -e 'sleep int(rand(3600))' && certbot -q renew --pre-hook "service nginx stop" --post-hook "service nginx start"

logs (short):

-- in /var/log/syslog
Jun 10 00:14:25 localhost systemd[1]: Starting Certbot...
Jun 10 00:14:38 localhost certbot[22222]: nginx: [error] open() "/run/nginx.pid$
Jun 10 00:14:41 localhost certbot[22222]: Hook command "nginx" returned error c$
Jun 10 00:14:41 localhost certbot[22222]: Error output from nginx:
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:443 $
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:80 f$
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:443 $
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:80 f$
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:443 $
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:80 f$
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:443 $
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:80 f$
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:443 $
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] bind() to 0.0.0.0:80 f$
Jun 10 00:14:41 localhost certbot[22222]: nginx: [emerg] still could not bind()
Jun 10 00:14:41 localhost systemd[1]: Started Certbot.


-- in /var/log/nginx/error.log
2018/06/10 00:14:27 [notice] 22233#22233: signal process started
2018/06/10 00:14:31 [notice] 22237#22237: signal process started
2018/06/10 00:14:33 [notice] 22240#22240: signal process started
2018/06/10 00:14:34 [notice] 22245#22245: signal process started
2018/06/10 00:14:38 [notice] 22255#22255: signal process started
2018/06/10 00:14:38 [error] 22255#22255: open() "/run/nginx.pid" failed (2: No $
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:443 failed (98: Addr$
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:80 failed (98: Addre$
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:443 failed (98: Addr$
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:80 failed (98: Addre$
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:443 failed (98: Addr$
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:80 failed (98: Addre$
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:443 failed (98: Addr$
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:80 failed (98: Addre$
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:443 failed (98: Addr$
2018/06/10 00:14:39 [emerg] 22261#22261: bind() to 0.0.0.0:80 failed (98: Addre$
2018/06/10 00:14:39 [emerg] 22261#22261: still could not bind()


回答7:

try to do this command

sudo fuser -k 443/tcp
service nginx restart


回答8:

I met similar problem. the log is like below 

2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:443 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to [::]:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:443 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to [::]:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:443 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to [::]:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:443 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to [::]:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to 0.0.0.0:443 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: bind() to [::]:80 failed (98: Address already in use)
2018/10/31 12:54:20 [emerg] 128005#128005: still could not bind()
2018/10/31 12:54:23 [alert] 127997#127997: unlink() "/run/nginx.pid" failed (2: No such file or directory)
2018/10/31 22:40:48 [info] 36948#36948: Using 32768KiB of shared memory for push module in /etc/nginx/nginx.conf:68
2018/10/31 22:50:40 [emerg] 37638#37638: duplicate listen options for [::]:80 in /etc/nginx/sites-enabled/default:18
2018/10/31 22:51:33 [info] 37787#37787: Using 32768KiB of shared memory for push module in /etc/nginx/nginx.conf:68

The last [emerg] shows that duplicate listen options for [::]:80 which means that there are more than one nginx block file containing [::]:80.

My solution is to remove one of the [::]:80 setting

P.S. you probably have default block file. My advice is to keep this file as default server for port 80. and remove [::]:80 from other block files



回答9:

I had several *.save files (emergency dumps from nano) from different NGINX config files in my sites-avilable dir. Once I deleted these .save files, NGINX restarted fine. I assumed these were harmless since there were no corresponding symlinks, but I guess I was wrong.



回答10:

First change apache listen port 80 to 8080 apache in /etc/apache2/ports.conf include

Listen 1.2.3.4:80 to 1.2.3.4:8080
sudo service apache2 restart

or 

sudo service httpd restart    // in case of centos

then add nginx as reverse proxy server that will listen apache port

server {
 listen   1.2.3.4:80;
 server_name  some.com;

 access_log  /var/log/nginx/something-access.log;

 location / {
  proxy_pass http://localhost:8080;
  proxy_redirect off;
  proxy_set_header Host $host;
  proxy_set_header X-Real-IP $remote_addr;
  proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
 }


location ~* ^.+\.(jpg|js|jpeg|png)$ {
   root /usr/share/nginx/html/;
}

location /404.html {
  root /usr/share/nginx/html/40x.html;
}

error_page 404 /404.html;
    location = /40x.html {
}

error_page 500 502 503 504 /50x.html;
    location = /50x.html {
}

# put code for static content like js/css/images/fonts
}

After changes restart nginx server

sudo service nginx restart

Now all traffic will be handled by nginx server and send all dynamic request to apache and static conten is served by nginx server.

For advance configuration like cache :

https://www.linode.com/docs/web-servers/nginx/slightly-more-advanced-configurations-for-nginx/#basic-nginx-caching



回答11:

To follow on to @lfender6445 and @SAURABH answers --

My problem was also the fact that after upgrading to Vagrant 2.2.2 Apache2 was running as a web server when the guest booted. In the past I only had nginx as a web server.

vagrant ssh into the box and run the following command to disable Apache2 from starting up whenever the guest box boots:

sudo update-rc.d -f apache2 remove

Exit ssh, vagrant halt, vagrant up. Problem solved.



回答12:

If problem persists after trying any of the above solutions, Restart your server once. It worked for me :)



回答13:

In my case the one of the services either Apache or Apache2 or Nginx was already running and due to that I was not able to start the other service.



标签： ubuntu nginx
举报

收藏的人(0)

Ta的文章 更多文章
登录 后发表评论
0条评论
还没有人评论过~