nn.Dropout vs. F.dropout pyTorch

问题:

By using pyTorch there is two ways to dropout torch.nn.Dropout and torch.nn.F.Dropout.

I struggle to see the difference between the use of them
- when to use what?
- Does it make a difference?
I don't see any performance difference when I switched them around.

回答1:

The technical differences have already been shown in the other answer. However the main difference is that nn.Dropout is a torch Module itself which bears some convenience:

A short example for illustration of some differences:

import torch
import torch.nn as nn

class Model1(nn.Module):
    # Model 1 using functional dropout
    def __init__(self, p=0.0):
        super().__init__()
        self.p = p

    def forward(self, inputs):
        return nn.functional.dropout(inputs, p=self.p, training=True)

class Model2(nn.Module):
    # Model 2 using dropout module
    def __init__(self, p=0.0):
        super().__init__()
        self.drop_layer = nn.Dropout(p=p)

    def forward(self, inputs):
        return self.drop_layer(inputs)
model1 = Model1(p=0.5) # functional dropout 
model2 = Model2(p=0.5) # dropout module

# creating inputs
inputs = torch.rand(10)
# forwarding inputs in train mode
print('Normal (train) model:')
print('Model 1', model1(inputs))
print('Model 2', model2(inputs))
print()

# switching to eval mode
model1.eval()
model2.eval()

# forwarding inputs in evaluation mode
print('Evaluation mode:')
print('Model 1', model1(inputs))
print('Model 2', model2(inputs))
# show model summary
print('Print summary:')
print(model1)
print(model2)

Output:

Normal (train) model:
Model 1 tensor([ 1.5040,  0.0000,  0.0000,  0.8563,  0.0000,  0.0000,  1.5951,
         0.0000,  0.0000,  0.0946])
Model 2 tensor([ 0.0000,  0.3713,  1.9303,  0.0000,  0.0000,  0.3574,  0.0000,
         1.1273,  1.5818,  0.0946])

Evaluation mode:
Model 1 tensor([ 0.0000,  0.3713,  0.0000,  0.0000,  0.0000,  0.0000,  0.0000,
         0.0000,  0.0000,  0.0000])
Model 2 tensor([ 0.7520,  0.1857,  0.9651,  0.4281,  0.7883,  0.1787,  0.7975,
         0.5636,  0.7909,  0.0473])
Print summary:
Model1()
Model2(
  (drop_layer): Dropout(p=0.5)
)

So which should I use?

Both are completely equivalent in terms of applying dropout and even though the differences in usage are not that big, there are some reasons to favour the nn.Dropout over nn.functional.dropout:

Dropout is designed to be only applied during training, so when doing predictions or evaluation of the model you want dropout to be turned off.

The dropout module nn.Dropout conveniently handles this and shuts dropout off as soon as your model enters evaluation mode, while the functional dropout does not care about the evaluation / prediction mode.

Even though you can set functional dropout to training=False to turn it off, it is still not such a convenient solution like with nn.Dropout.

Also the drop rate is stored in the module, so you don't have to save it in an extra variable. In larger networks you might want to create different dropout layers with different drop rates - here nn.Dropout may increase readability and can bear also some convenience when using the layers multiple times.

Finally, all modules which are assigned to your model are registered in your model. So you model class keeps track of them, that is why you can just turn off the dropout module by calling eval(). When using the functional dropout your model is not aware of it, thus it won't appear in any summary.

回答2:

If you look at the source code of nn.Dropout and Functional.Dropout, you can see Functional is an interface and nn module implement functions with respect to this interface.
Look at the implementations in nn class:

from .. import functional as F
class Dropout(_DropoutNd):
    def forward(self, input):
        return F.dropout(input, self.p, self.training, self.inplace)

class Dropout2d(_DropoutNd):
    def forward(self, input):
        return F.dropout2d(input, self.p, self.training, self.inplace)

And so on.

Implementation of Functional class:

def dropout(input, p=0.5, training=False, inplace=False):
    return _functions.dropout.Dropout.apply(input, p, training, inplace)

def dropout2d(input, p=0.5, training=False, inplace=False):
    return _functions.dropout.FeatureDropout.apply(input, p, training, inplace)

look at the example below to understand:

class Net(nn.Module):
    def __init__(self):
        super(Net, self).__init__()
        self.conv1 = nn.Conv2d(1, 10, kernel_size=5)
        self.conv2 = nn.Conv2d(10, 20, kernel_size=5)
        self.conv2_drop = nn.Dropout2d()
        self.fc1 = nn.Linear(320, 50)
        self.fc2 = nn.Linear(50, 10)

    def forward(self, x):
        x = F.relu(F.max_pool2d(self.conv1(x), 2))
        x = F.relu(F.max_pool2d(self.conv2_drop(self.conv2(x)), 2))
        x = x.view(-1, 320)
        x = F.relu(self.fc1(x))
        x = F.dropout(x, training=self.training)
        x = self.fc2(x)
        return F.log_softmax(x)

There is a F.dropout in forward() function and a nn.Dropout in __init__() function. Now this is the explanation:

In PyTorch you define your Models as subclasses of torch.nn.Module.

In the init function, you are supposed to initialize the layers you want to use. Unlike keras, Pytorch goes more low level and you have to specify the sizes of your network so that everything matches.

In the forward method, you specify the connections of your layers. This means that you will use the layers you already initialized, in order to re-use the same layer for each forward pass of data you make.

torch.nn.Functional contains some useful functions like activation functions a convolution operations you can use. However, these are not full layers so if you want to specify a layer of any kind you should use torch.nn.Module.

You would use the torch.nn.Functional conv operations to define a custom layer for example with a convolution operation, but not to define a standard convolution layer.