S3 Static Website Hosting Route All Paths to Index

问题:

I am using S3 to host a javascript app that will use HTML5 pushStates. The problem is if the user bookmarks any of the URLs, it will not resolve to anything. What I need is the ability to take all url requests and serve up the root index.html in my S3 bucket, rather than just doing a full redirect. Then my javascript application could parse the URL and serve the proper page.

Is there any way to tell S3 to serve the index.html for all URL requests instead of doing redirects? This would be similar to setting up apache to handle all incoming requests by serving up a single index.html as in this example: https://stackoverflow.com/a/10647521/1762614. I would really like to avoid running a web server just to handle these routes. Doing everything from S3 is very appealing.

回答1:

Mark solution is not bad but there is an even simpler solution to that. In your bucket properties in the Error Document just use the same file as the Index Document. JavaScript frameworks like Backbone, AngularJS etc, will work out of the box this way and page refresh will be fully supported.

回答2:

The way I was able to get this to work is as follows:

In the Edit Redirection Rules section of the S3 Console for your domain, add the following rules:

<RoutingRules>
  <RoutingRule>
    <Condition>
      <HttpErrorCodeReturnedEquals>404</HttpErrorCodeReturnedEquals>
    </Condition>
    <Redirect>
      <HostName>yourdomainname.com</HostName>
      <ReplaceKeyPrefixWith>#!/</ReplaceKeyPrefixWith>
    </Redirect>
  </RoutingRule>
</RoutingRules>

This will redirect all paths that result in a 404 not found to your root domain with a hash-bang version of the path. So http://yourdomainname.com/posts will redirect to http://yourdomainname.com/#!/posts provided there is no file at /posts.

To use HTML5 pushStates however, we need to take this request and manually establish the proper pushState based on the hash-bang path. So add this to the top of your index.html file:

<script>
  history.pushState({}, \"entry page\", location.hash.substring(1));
</script>

This grabs the hash and turns it into an HTML5 pushState. From this point on you can use pushStates to have non-hash-bang paths in your app.

回答3:

It\'s very easy to solve it without url hacks, with CloudFront help.

• Create S3 bucket, for example: react
• Create CloudFront distributions with these settings:
  • Default Root Object: index.html
  • Origin Domain Name: S3 bucket domain, for example: react.s3.amazonaws.com
• Go to Error Pages tab, click on Create Custom Error Response:
  • HTTP Error Code: 403: Forbidden (404: Not Found, in case of S3 Static Website)
  • Customize Error Response: Yes
  • Response Page Path: /index.html
  • HTTP Response Code: 200: OK
  • Click on Create

回答4:

There are few problems with the S3/Redirect based approach mentioned by others.

1. mutliple redirects happen as your app\'s paths are resolved. For example: www.myapp.com/path/for/test gets redirected as www.myapp.com/#/path/for/test
2. There is a flicker in the url bar as the \'#\' comes and goes due the action of your SPA framework.
3. The seo is impacted because - \'Hey! Its google forcing his hand on redirects\'
4. Safari support for your app goes for a toss.

The solution is:

1. Make sure you have the index route configured for your website. Mostly it is index.html
2. Remove routing rules from S3 configurations
3. Put a Cloudfront in front of your S3 bucket.
4. Configure error page rules for your Cloudfront instance. In the error rules specify:
   • Http error code: 404 (and 403 or other errors as per need)
   • Error Caching Minimum TTL (seconds) : 0
   • Customize response: Yes
   • Response Page Path : /index.html
   • HTTP Response Code: 200

5.For SEO needs + making sure your index.html does not cache, do the following:

• Configure an EC2 instance and setup an nginx server.
• Assign a public ip to your EC2 instance.
• Create an ELB that has the EC2 instance you created as an instance
• You should be able to assign the ELB to your DNS.
• Now, configure your nginx server to do the following things: Proxy_pass all requests to your CDN (for index.html only, serve other assets directly from your cloudfront) and for search bots, redirect traffic as stipulated by services like Prerender.io

I can help in more details with respect to nginx setup, just leave a note. Have learnt it the hard way.

Once the cloud front distribution update. Invalidate your cloudfront cache once to be in the pristine mode. Hit the url in the browser and all should be good.

回答5:

It\'s tangential, but here\'s a tip for those using Rackt\'s React Router library with (HTML5) browser history who want to host on S3.

Suppose a user visits /foo/bear at your S3-hosted static web site. Given David\'s earlier suggestion, redirect rules will send them to /#/foo/bear. If your application\'s built using browser history, this won\'t do much good. However your application is loaded at this point and it can now manipulate history.

Including Rackt history in our project (see also Using Custom Histories from the React Router project), you can add a listener that\'s aware of hash history paths and replace the path as appropriate, as illustrated in this example:

import ReactDOM from \'react-dom\';

/* Application-specific details. */
const route = {};

import { Router, useRouterHistory } from \'react-router\';
import { createHistory } from \'history\';

const history = useRouterHistory(createHistory)();

history.listen(function (location) {
  const path = (/#(\\/.*)$/.exec(location.hash) || [])[1];
  if (path) history.replace(path);
});

ReactDOM.render(
  <Router history={history} routes={route}/>,
  document.body.appendChild(document.createElement(\'div\'))
);

To recap:

1. David\'s S3 redirect rule will direct /foo/bear to /#/foo/bear.
2. Your application will load.
3. The history listener will detect the #/foo/bear history notation.
4. And replace history with the correct path.

Link tags will work as expected, as will all other browser history functions. The only downside I\'ve noticed is the interstitial redirect that occurs on initial request.

This was inspired by a solution for AngularJS, and I suspect could be easily adapted to any application.

回答6:

I ran into the same problem today but the solution of @Mark-Nutter was incomplete to remove the hashbang from my angularjs application.

In fact you have to go to Edit Permissions, click on Add more permissions and then add the right List on your bucket to everyone. With this configuration, AWS S3 will now, be able to return 404 error and then the redirection rule will properly catch the case.

Just like this :

And then you can go to Edit Redirection Rules and add this rule :

<RoutingRules>
    <RoutingRule>
        <Condition>
            <HttpErrorCodeReturnedEquals>404</HttpErrorCodeReturnedEquals>
        </Condition>
        <Redirect>
            <HostName>subdomain.domain.fr</HostName>
            <ReplaceKeyPrefixWith>#!/</ReplaceKeyPrefixWith>
        </Redirect>
    </RoutingRule>
</RoutingRules>

Here you can replace the HostName subdomain.domain.fr with your domain and the KeyPrefix #!/ if you don\'t use the hashbang method for SEO purpose.

Of course, all of this will only work if you have already have setup html5mode in your angular application.

$locationProvider.html5Mode(true).hashPrefix(\'!\');

回答7:

I see 4 solutions to this problem. The first 3 were already covered in answers and the last one is my contribution.

1. Set the error document to index.html.
   Problem: the response body will be correct, but the status code will be 404, which hurts SEO.

2. Set the redirection rules.
   Problem: URL polluted with #! and page flashes when loaded.

3. Configure CloudFront.
   Problem: all pages will return 404 from origin, so you need to chose if you won\'t cache anything (TTL 0 as suggested) or if you will cache and have issues when updating the site.

4. Prerender all pages.
   Problem: additional work to prerender pages, specially when the pages changes frequently. For example, a news website.

My suggestion is to use option 4. If you prerender all pages, there will be no 404 errors for expected pages. The page will load fine and the framework will take control and act normally as a SPA. You can also set the error document to display a generic error.html page and a redirection rule to redirect 404 errors to a 404.html page (without the hashbang).

Regarding 403 Forbidden errors, I don\'t let them happen at all. In my application, I consider that all files within the host bucket are public and I set this with the everyone option with the read permission. If your site have pages that are private, letting the user to see the HTML layout should not be an issue. What you need to protect is the data and this is done in the backend.

Also, if you have private assets, like user photos, you can save them in another bucket. Because private assets need the same care as data and can\'t be compared to the asset files that are used to host the app.

回答8:

The easiest solution to make Angular 2+ application served from Amazon S3 and direct URLs working is to specify index.html both as Index and Error documents in S3 bucket configuration.

回答9:

since the problem is still there I though I throw in another solution. My case was that I wanted to auto deploy all pull requests to s3 for testing before merge making them accessible on [mydomain]/pull-requests/[pr number]/
(ex. www.example.com/pull-requests/822/)

To the best of my knowledge non of s3 rules scenarios would allow to have multiple projects in one bucket using html5 routing so while above most voted suggestion works for a project in root folder, it doesn\'t for multiple projects in own subfolders.

So I pointed my domain to my server where following nginx config did the job

location /pull-requests/ {
    try_files $uri @get_files;
}
location @get_files {
    rewrite ^\\/pull-requests\\/(.*) /$1 break;
    proxy_pass http://<your-amazon-bucket-url>;
    proxy_intercept_errors on;
    recursive_error_pages on;
    error_page 404 = @get_routes;
}

location @get_routes {
    rewrite ^\\/(\\w+)\\/(.+) /$1/ break;
    proxy_pass http://<your-amazon-bucket-url>;
    proxy_intercept_errors on;
    recursive_error_pages on;
    error_page 404 = @not_found;
}

location @not_found {
    return 404;
}

it tries to get the file and if not found assumes it is html5 route and tries that. If you have a 404 angular page for not found routes you will never get to @not_found and get you angular 404 page returned instead of not found files, which could be fixed with some if rule in @get_routes or something.

I have to say I don\'t feel too comfortable in area of nginx config and using regex for that matter, I got this working with some trial and error so while this works I am sure there is room for improvement and please do share your thoughts.

Note: remove s3 redirection rules if you had them in S3 config.

and btw works in Safari

回答10:

Was looking for the same kind of problem. I ended up using a mix of the suggested solutions described above.

First, I have an s3 bucket with multiple folders, each folder represents a react/redux website. I also use cloudfront for cache invalidation.

So I had to use Routing Rules for supporting 404 and redirect them to an hash config:

<RoutingRules>
    <RoutingRule>
        <Condition>
            <KeyPrefixEquals>website1/</KeyPrefixEquals>
            <HttpErrorCodeReturnedEquals>404</HttpErrorCodeReturnedEquals>
        </Condition>
        <Redirect>
            <Protocol>https</Protocol>
            <HostName>my.host.com</HostName>
            <ReplaceKeyPrefixWith>website1#</ReplaceKeyPrefixWith>
        </Redirect>
    </RoutingRule>
    <RoutingRule>
        <Condition>
            <KeyPrefixEquals>website2/</KeyPrefixEquals>
            <HttpErrorCodeReturnedEquals>404</HttpErrorCodeReturnedEquals>
        </Condition>
        <Redirect>
            <Protocol>https</Protocol>
            <HostName>my.host.com</HostName>
            <ReplaceKeyPrefixWith>website2#</ReplaceKeyPrefixWith>
        </Redirect>
    </RoutingRule>
    <RoutingRule>
        <Condition>
            <KeyPrefixEquals>website3/</KeyPrefixEquals>
            <HttpErrorCodeReturnedEquals>404</HttpErrorCodeReturnedEquals>
        </Condition>
        <Redirect>
            <Protocol>https</Protocol>
            <HostName>my.host.com</HostName>
            <ReplaceKeyPrefixWith>website3#</ReplaceKeyPrefixWith>
        </Redirect>
    </RoutingRule>
</RoutingRules>

In my js code, I needed to handle it with a baseName config for react-router. First of all, make sure your dependencies are interoperable, I had installed history==4.0.0 wich was incompatible with react-router==3.0.1.

My dependencies are:

• \"history\": \"3.2.0\",
• \"react\": \"15.4.1\",
• \"react-redux\": \"4.4.6\",
• \"react-router\": \"3.0.1\",
• \"react-router-redux\": \"4.0.7\",

I\'ve created a history.js file for loading history:

import {useRouterHistory} from \'react-router\';
import createBrowserHistory from \'history/lib/createBrowserHistory\';

export const browserHistory = useRouterHistory(createBrowserHistory)({
    basename: \'/website1/\',
});

browserHistory.listen((location) => {
    const path = (/#(.*)$/.exec(location.hash) || [])[1];
    if (path) {
        browserHistory.replace(path);
    }
});

export default browserHistory;

This piece of code allow to handle the 404 sent by the sever with an hash, and replace them in history for loading our routes.

You can now use this file for configuring your store ans your Root file.

import {routerMiddleware} from \'react-router-redux\';
import {applyMiddleware, compose} from \'redux\';

import rootSaga from \'../sagas\';
import rootReducer from \'../reducers\';

import {createInjectSagasStore, sagaMiddleware} from \'./redux-sagas-injector\';

import {browserHistory} from \'../history\';

export default function configureStore(initialState) {
    const enhancers = [
        applyMiddleware(
            sagaMiddleware,
            routerMiddleware(browserHistory),
        )];

    return createInjectSagasStore(rootReducer, rootSaga, initialState, compose(...enhancers));
}

import React, {PropTypes} from \'react\';
import {Provider} from \'react-redux\';
import {Router} from \'react-router\';
import {syncHistoryWithStore} from \'react-router-redux\';
import MuiThemeProvider from \'material-ui/styles/MuiThemeProvider\';
import getMuiTheme from \'material-ui/styles/getMuiTheme\';
import variables from \'!!sass-variable-loader!../../../css/variables/variables.prod.scss\';
import routesFactory from \'../routes\';
import {browserHistory} from \'../history\';

const muiTheme = getMuiTheme({
    palette: {
        primary1Color: variables.baseColor,
    },
});

const Root = ({store}) => {
    const history = syncHistoryWithStore(browserHistory, store);
    const routes = routesFactory(store);

    return (
        <Provider {...{store}}>
            <MuiThemeProvider muiTheme={muiTheme}>
                <Router {...{history, routes}} />
            </MuiThemeProvider>
        </Provider>
    );
};

Root.propTypes = {
    store: PropTypes.shape({}).isRequired,
};

export default Root;

Hope it helps. You\'ll notice with this configuration I use redux injector and an homebrew sagas injector for loading javascript asynchrounously via routing. Don\'t mind with theses lines.

回答11:

I was looking for an answer to this myself. S3 appears to only support redirects, you can\'t just rewrite the URL and silently return a different resource. I\'m considering using my build script to simply make copies of my index.html in all of the required path locations. Maybe that will work for you too.

回答12:

This is the most elegant solution that I found - use the app router module with a wildcard redirect.

{ path: \'**\', redirectTo: \'\' }

Then, as mentioned in the countless posts above, make sure you\'re redirecting 404/403 errors to index.html with 200 status. The problem is that this results in a browser refresh loading the base href as (href + previous route). If you were viewing the router view at

www.my-app.com/home then the refresh will show

www.my-app.com/home/home

To strip the duplicate route path, use the APP_BASE_HREF module to reassign the browser base href just like this

If you need to preserve the first url parameter, then append multiple results from the \'/\' split.

Browser hits to your SPA redirect for www.your-app.com/home/home will now replace the URL with www.your-app.com/home and the app will behave as expected from your in-app routing config