Fiddler causes my Internet access to stop working

问题:

I have Windows 8.1 installed on my computer and regularly use Fiddler to capture web traffic.

Recently, however, when I open Fiddler and have it capture web traffic, my Internet connectivity dies. The error I get when I open IE is "This page cannot be displayed." In Chrome, I get "The web page is not available" with the following error: Error code: ERR_CONNECTION_RESET.

Fiddler doesn't even capture any of the requests going out. The weird thing is, this problem randomly starts, but then in an hour or two, it's fine. I don't restart Fiddler; it just suddenly starts working again.

I tried following the steps in Fiddler and Internet Explorer 11 on Windows 8.1, but that didn't help.

Why is Fiddler having this problem, and how can I fix it?

回答1:

Tools, Internet options, Connections, Lan Settings, untick 'use a proxy server' for your lan and tick 'automtacally detect settings'

回答2:

I had the same issue with Windows 7 and Fiddler v4.6.1.4.

Whenever Fiddler was running, Google Chrome refused to let me connect to gmail, complaining about the Privacy settings.

My solution was to go into Tools\Fiddler Options, and untick the box to capture HTTPS connections.

Disabling the Proxy settings in Network settings also solved this issue.

回答3:

This is the correct answer from the Telerik, the makers of Fiddler:
http://www.telerik.com/blogs/fiddler-and-internet-explorer-11-on-windows-8-1

From their site:

If you’re using Fiddler with Internet Explorer 11 on the now-in-beta Windows 8.1 OS, some simple additional configuration is required.

IE 11, when running on Windows 8.1, enables the Enhanced Protected Mode (EPM) feature by default. EPM was available in IE10 on Win8, but was off by default for Desktop IE and only enabled for the "non-desktop” mode of IE.

EPM is based on an isolation technology known as AppContainer; AppContainer restricts the destinations to which network traffic can be sent. Unfortunately for Fiddler users, “Internet-Zone” AppContainers are forbidden from sending traffic to the local computer. By default, IE instances in EPM cannot send their traffic to Fiddler, because it’s a proxy that runs on the local computer.

If you attempt to open any Internet-Zone page with Fiddler running, you’ll see an error message complaining “The proxy server isn’t responding”.

Fortunately, working around this problem is simple; just follow these steps:

1. Click the Win8 Config button in the Fiddler toolbar.

2. Click Yes in the Elevation prompt (shown if Fiddler is not running as Admin)

3. In the window that appears, either click Exempt All or manually tick the checkbox next to the AppContainers with the display name windows_ie_ac_###. (IE may create more than one AppContainer to handle certain scenarios).

4. Click the Save Changes button.

After you make this configuration change, IE will no longer be forbidden from sending its traffic to Fiddler, and the tool should work correctly.

回答4:

I had the same problem so I stopped capturing traffic (File -> Capture Traffic, F12), and this fixed the connectivity issue, and I could still execute the local Rest URL.

Problem is if you actually want to capture the traffic. My issue was I was behind a proxy and as well as setting the LAN settings in Internet Properties, I also needed to set it in Fiddler (Tools -> Fiddler Options -> Gateway [Choose or configure proxy option] ), and that worked for me

EDIT

Choosing the 'Use System Proxy (Recommended)', from fiddler options worked for a bit and then stoppped again. So I used the Manual Proxy Configuration and that works better

http=proxy.[your proxy domain].net:80; https=proxy.[your proxy domain].net:80

Make sure you restart fiddler after each modification

回答5:

Change the port from 8888 to another one that is not already used (Tools -> Fiddler Options -> Connection)

I had to change the port because I installed the Windows Phone 8.1 SDK which seems to ship with a debugger listening on port 8888. So that was the reason for the connection failures.

回答6:

I know this is old, but I've just had the same issue. Recently upgraded to Windows10 and Fiddler blocks all traffic. The Windows10 upgrade may be a coincidence but I thought I'd mention it.

None of the other solutions worked and I've wasted about an hour trying to resolve the problem...

Anyway - the only solution that worked for me - uninstall then reinstall... All working fine again now.

回答7:

Follow this steps and you'll have internet again : internet properties => connections => LAN setting => debifate "use a proxy server for your lan".

回答8:

Go to Fiddler Options/ gateway and select

USE System proxy.

回答9:

I also found this issue and the reason is that webstorm has a build-in nodejs server which also listens on 8888. So when i open webstorm and fiddler at the same time i can't access the internet. Just change the port!

回答10:

I've found a solution to this after a few days troubled. When closed or stopped using Fiddler capture request, its still not change all the setting into previous settings that fit for windows 8/8.1/10 so all you have to do is following these steps:

1. Open internet setting *run -> inetcpl.cpl or *search internet option

2. Connection tab -> LAN setting -> untick the Proxy Server (this in case Fiddler wasn't restore the setting) -> OK

3. Security tab -> Local Intranet -> Restore default -> OK

now all the universal apps have access to the internet again.

回答11:

If you find that web traffic works if you disable 'Decrypt HTTPS traffic' in Tools > Options > HTTPS, then you may need to do this; In the same HTTPS tab, click 'Actions', 'Trust Root Certificate', then accept the prompts.