I'm trying to learn BNF and attempting to assemble some Z80 ASM code. Since I'm new to both fields, my question is, am I even on the right track? I am trying to write the format of Z80 ASM as EBNF so that I can then figure out where to go from there to create machine code from the source. At the moment I have the following:
Assignment = Identifier, ":" ;
Instruction = Opcode, [ Operand ], [ Operand ] ;
Operand = Identifier | Something* ;
Something* = "(" , Identifier, ")" ;
Identifier = Alpha, { Numeric | Alpha } ;
Opcode = Alpha, Alpha ;
Int = [ "-" ], Numeric, { Numeric } ;
Alpha = "A" | "B" | "C" | "D" | "E" | "F" |
"G" | "H" | "I" | "J" | "K" | "L" |
"M" | "N" | "O" | "P" | "Q" | "R" |
"S" | "T" | "U" | "V" | "W" | "X" |
"Y" | "Z" ;
Numeric = "0" | "1" | "2" | "3"| "4" |
"5" | "6" | "7" | "8" | "9" ;
Any directional feedback if I am going wrong would be excellent.
Old-school assemblers were typically hand-coded in assembler and used adhoc parsing techniques to process assembly source lines to produce actual assembler code.
When assembler syntax is simple (e.g. always OPCODE REG, OPERAND) this worked well enough.
Modern machines have messy, nasty instruction sets with lots of instruction variations and operands, which may be expressed with complex syntax allowing multiple index registers to participate in the operand expression. Allowing sophisticated assembly-time expressions with fixed and relocatable constants with various types of addition operators complicates this. Sophisticated assemblers allowing conditional compilation, macros, structured data declarations, etc. all add new demands on syntax. Processing all this syntax by ad hoc methods is very hard and is the reason that parser generators were invented.
Using a BNF and a parser generator is very reasonable way to build a modern assembler, even for a legacy processor such as the Z80. I have built such assemblers for Motorola 8 bit machines such as the 6800/6809, and am getting ready to do the same for a modern x86. I think you're headed down exactly the right path.
********** EDIT ****************
The OP asked for example lexer and parser definitions.
I've provided both here.
These are excerpts from real specifications for a 6809 asssembler.
The complete definitions are 2-3x the size of the samples here.
To keep space down, I have edited out much of the dark-corner complexity
which is the point of these definitions.
One might be dismayed by the apparant complexity; the
point is that with such definitions, you are trying to describe the
shape of the language, not code it procedurally.
You will pay a significantly higher complexity if you
code all this in an ad hoc manner, and it will be far
less maintainable.
It will also be of some help to know that these definitions
are used with a high-end program analysis system that
has lexing/parsing tools as subsystems, called the
The DMS Software Reengineering Toolkit. DMS will automatically build ASTs from the
grammar rules in the parser specfication, which makes it a
lot easier to buid parsing tools. Lastly,
the parser specification contains so-called "prettyprinter"
declarations, which allows DMS to regenreate source text from the ASTs.
(The real purpose of the grammer was to allow us to build ASTs representing assembler
instructions, and then spit them out to be fed to a real assembler!)
One thing of note: how lexemes and grammar rules are stated (the metasyntxax!)
varies somewhat between different lexer/parser generator systems. The
syntax of DMS-based specifications is no exception. DMS has relatively sophisticated
grammar rules of its own, that really aren't practical to explain in the space available here. You'll have to live with idea that other systems use similar notations, for
EBNF for rules and and regular expression variants for lexemes.
Given the OP's interests, he can implement similar lexer/parsers
with any lexer/parser generator tool, e.g., FLEX/YACC,
JAVACC, ANTLR, ...
********** LEXER **************
-- M6809.lex: Lexical Description for M6809
-- Copyright (C) 1989,1999-2002 Ira D. Baxter
%%
#mainmode Label
#macro digit "[0-9]"
#macro hexadecimaldigit "<digit>|[a-fA-F]"
#macro comment_body_character "[\u0009 \u0020-\u007E]" -- does not include NEWLINE
#macro blank "[\u0000 \ \u0009]"
#macro hblanks "<blank>+"
#macro newline "\u000d \u000a? \u000c? | \u000a \u000c?" -- form feed allowed only after newline
#macro bare_semicolon_comment "\; <comment_body_character>* "
#macro bare_asterisk_comment "\* <comment_body_character>* "
...[snip]
#macro hexadecimal_digit "<digit> | [a-fA-F]"
#macro binary_digit "[01]"
#macro squoted_character "\' [\u0021-\u007E]"
#macro string_character "[\u0009 \u0020-\u007E]"
%%Label -- (First mode) processes left hand side of line: labels, opcodes, etc.
#skip "(<blank>*<newline>)+"
#skip "(<blank>*<newline>)*<blank>+"
<< (GotoOpcodeField ?) >>
#precomment "<comment_line><newline>"
#preskip "(<blank>*<newline>)+"
#preskip "(<blank>*<newline>)*<blank>+"
<< (GotoOpcodeField ?) >>
-- Note that an apparant register name is accepted as a label in this mode
#token LABEL [STRING] "<identifier>"
<< (local (;; (= [TokenScan natural] 1) ; process all string characters
(= [TokenLength natural] ?:TokenCharacterCount)=
(= [TokenString (reference TokenBodyT)] (. ?:TokenCharacters))
(= [Result (reference string)] (. ?:Lexeme:Literal:String:Value))
[ThisCharacterCode natural]
(define Ordinala #61)
(define Ordinalf #66)
(define OrdinalA #41)
(define OrdinalF #46)
);;
(;; (= (@ Result) `') ; start with empty string
(while (<= TokenScan TokenLength)
(;; (= ThisCharacterCode (coerce natural TokenString:TokenScan))
(+= TokenScan) ; bump past character
(ifthen (>= ThisCharacterCode Ordinala)
(-= ThisCharacterCode #20) ; fold to upper case
)ifthen
(= (@ Result) (append (@ Result) (coerce character ThisCharacterCode)))=
);;
)while
);;
)local
(= ?:Lexeme:Literal:String:Format (LiteralFormat:MakeCompactStringLiteralFormat 0)) ; nothing interesting in string
(GotoLabelList ?)
>>
%%OpcodeField
#skip "<hblanks>"
<< (GotoEOLComment ?) >>
#ifnotoken
<< (GotoEOLComment ?) >>
-- Opcode field tokens
#token 'ABA' "[aA][bB][aA]"
<< (GotoEOLComment ?) >>
#token 'ABX' "[aA][bB][xX]"
<< (GotoEOLComment ?) >>
#token 'ADC' "[aA][dD][cC]"
<< (GotoABregister ?) >>
#token 'ADCA' "[aA][dD][cC][aA]"
<< (GotoOperand ?) >>
#token 'ADCB' "[aA][dD][cC][bB]"
<< (GotoOperand ?) >>
#token 'ADCD' "[aA][dD][cC][dD]"
<< (GotoOperand ?) >>
#token 'ADD' "[aA][dD][dD]"
<< (GotoABregister ?) >>
#token 'ADDA' "[aA][dD][dD][aA]"
<< (GotoOperand ?) >>
#token 'ADDB' "[aA][dD][dD][bB]"
<< (GotoOperand ?) >>
#token 'ADDD' "[aA][dD][dD][dD]"
<< (GotoOperand ?) >>
#token 'AND' "[aA][nN][dD]"
<< (GotoABregister ?) >>
#token 'ANDA' "[aA][nN][dD][aA]"
<< (GotoOperand ?) >>
#token 'ANDB' "[aA][nN][dD][bB]"
<< (GotoOperand ?) >>
#token 'ANDCC' "[aA][nN][dD][cC][cC]"
<< (GotoRegister ?) >>
...[long list of opcodes snipped]
#token IDENTIFIER [STRING] "<identifier>"
<< (local (;; (= [TokenScan natural] 1) ; process all string characters
(= [TokenLength natural] ?:TokenCharacterCount)=
(= [TokenString (reference TokenBodyT)] (. ?:TokenCharacters))
(= [Result (reference string)] (. ?:Lexeme:Literal:String:Value))
[ThisCharacterCode natural]
(define Ordinala #61)
(define Ordinalf #66)
(define OrdinalA #41)
(define OrdinalF #46)
);;
(;; (= (@ Result) `') ; start with empty string
(while (<= TokenScan TokenLength)
(;; (= ThisCharacterCode (coerce natural TokenString:TokenScan))
(+= TokenScan) ; bump past character
(ifthen (>= ThisCharacterCode Ordinala)
(-= ThisCharacterCode #20) ; fold to upper case
)ifthen
(= (@ Result) (append (@ Result) (coerce character ThisCharacterCode)))=
);;
)while
);;
)local
(= ?:Lexeme:Literal:String:Format (LiteralFormat:MakeCompactStringLiteralFormat 0)) ; nothing interesting in string
(GotoOperandField ?)
>>
#token '#' "\#" -- special constant introduction (FDB)
<< (GotoDataField ?) >>
#token NUMBER [NATURAL] "<decimal_number>"
<< (local [format LiteralFormat:NaturalLiteralFormat]
(;; (= ?:Lexeme:Literal:Natural:Value (ConvertDecimalTokenStringToNatural (. format) ? 0 0))
(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
);;
)local
(GotoOperandField ?)
>>
#token NUMBER [NATURAL] "\$ <hexadecimal_digit>+"
<< (local [format LiteralFormat:NaturalLiteralFormat]
(;; (= ?:Lexeme:Literal:Natural:Value (ConvertHexadecimalTokenStringToNatural (. format) ? 1 0))
(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
);;
)local
(GotoOperandField ?)
>>
#token NUMBER [NATURAL] "\% <binary_digit>+"
<< (local [format LiteralFormat:NaturalLiteralFormat]
(;; (= ?:Lexeme:Literal:Natural:Value (ConvertBinaryTokenStringToNatural (. format) ? 1 0))
(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
);;
)local
(GotoOperandField ?)
>>
#token CHARACTER [CHARACTER] "<squoted_character>"
<< (= ?:Lexeme:Literal:Character:Value (TokenStringCharacter ? 2))
(= ?:Lexeme:Literal:Character:Format (LiteralFormat:MakeCompactCharacterLiteralFormat 0 0)) ; nothing special about character
(GotoOperandField ?)
>>
%%OperandField
#skip "<hblanks>"
<< (GotoEOLComment ?) >>
#ifnotoken
<< (GotoEOLComment ?) >>
-- Tokens signalling switch to index register modes
#token ',' "\,"
<<(GotoRegisterField ?)>>
#token '[' "\["
<<(GotoRegisterField ?)>>
-- Operators for arithmetic syntax
#token '!!' "\!\!"
#token '!' "\!"
#token '##' "\#\#"
#token '#' "\#"
#token '&' "\&"
#token '(' "\("
#token ')' "\)"
#token '*' "\*"
#token '+' "\+"
#token '-' "\-"
#token '/' "\/"
#token '//' "\/\/"
#token '<' "\<"
#token '<' "\<"
#token '<<' "\<\<"
#token '<=' "\<\="
#token '</' "\<\/"
#token '=' "\="
#token '>' "\>"
#token '>' "\>"
#token '>=' "\>\="
#token '>>' "\>\>"
#token '>/' "\>\/"
#token '\\' "\\"
#token '|' "\|"
#token '||' "\|\|"
#token NUMBER [NATURAL] "<decimal_number>"
<< (local [format LiteralFormat:NaturalLiteralFormat]
(;; (= ?:Lexeme:Literal:Natural:Value (ConvertDecimalTokenStringToNatural (. format) ? 0 0))
(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
);;
)local
>>
#token NUMBER [NATURAL] "\$ <hexadecimal_digit>+"
<< (local [format LiteralFormat:NaturalLiteralFormat]
(;; (= ?:Lexeme:Literal:Natural:Value (ConvertHexadecimalTokenStringToNatural (. format) ? 1 0))
(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
);;
)local
>>
#token NUMBER [NATURAL] "\% <binary_digit>+"
<< (local [format LiteralFormat:NaturalLiteralFormat]
(;; (= ?:Lexeme:Literal:Natural:Value (ConvertBinaryTokenStringToNatural (. format) ? 1 0))
(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
);;
)local
>>
-- Notice that an apparent register is accepted as a label in this mode
#token IDENTIFIER [STRING] "<identifier>"
<< (local (;; (= [TokenScan natural] 1) ; process all string characters
(= [TokenLength natural] ?:TokenCharacterCount)=
(= [TokenString (reference TokenBodyT)] (. ?:TokenCharacters))
(= [Result (reference string)] (. ?:Lexeme:Literal:String:Value))
[ThisCharacterCode natural]
(define Ordinala #61)
(define Ordinalf #66)
(define OrdinalA #41)
(define OrdinalF #46)
);;
(;; (= (@ Result) `') ; start with empty string
(while (<= TokenScan TokenLength)
(;; (= ThisCharacterCode (coerce natural TokenString:TokenScan))
(+= TokenScan) ; bump past character
(ifthen (>= ThisCharacterCode Ordinala)
(-= ThisCharacterCode #20) ; fold to upper case
)ifthen
(= (@ Result) (append (@ Result) (coerce character ThisCharacterCode)))=
);;
)while
);;
)local
(= ?:Lexeme:Literal:String:Format (LiteralFormat:MakeCompactStringLiteralFormat 0)) ; nothing interesting in string
>>
%%Register -- operand field for TFR, ANDCC, ORCC, EXG opcodes
#skip "<hblanks>"
#ifnotoken << (GotoRegisterField ?) >>
%%RegisterField -- handles registers and indexing mode syntax
-- In this mode, names that look like registers are recognized as registers
#skip "<hblanks>"
<< (GotoEOLComment ?) >>
#ifnotoken
<< (GotoEOLComment ?) >>
#token '[' "\["
#token ']' "\]"
#token '--' "\-\-"
#token '++' "\+\+"
#token 'A' "[aA]"
#token 'B' "[bB]"
#token 'CC' "[cC][cC]"
#token 'DP' "[dD][pP] | [dD][pP][rR]" -- DPR shouldnt be needed, but found one instance
#token 'D' "[dD]"
#token 'Z' "[zZ]"
-- Index register designations
#token 'X' "[xX]"
#token 'Y' "[yY]"
#token 'U' "[uU]"
#token 'S' "[sS]"
#token 'PCR' "[pP][cC][rR]"
#token 'PC' "[pP][cC]"
#token ',' "\,"
-- Operators for arithmetic syntax
#token '!!' "\!\!"
#token '!' "\!"
#token '##' "\#\#"
#token '#' "\#"
#token '&' "\&"
#token '(' "\("
#token ')' "\)"
#token '*' "\*"
#token '+' "\+"
#token '-' "\-"
#token '/' "\/"
#token '<' "\<"
#token '<' "\<"
#token '<<' "\<\<"
#token '<=' "\<\="
#token '<|' "\<\|"
#token '=' "\="
#token '>' "\>"
#token '>' "\>"
#token '>=' "\>\="
#token '>>' "\>\>"
#token '>|' "\>\|"
#token '\\' "\\"
#token '|' "\|"
#token '||' "\|\|"
#token NUMBER [NATURAL] "<decimal_number>"
<< (local [format LiteralFormat:NaturalLiteralFormat]
(;; (= ?:Lexeme:Literal:Natural:Value (ConvertDecimalTokenStringToNatural (. format) ? 0 0))
(= ?:Lexeme:Literal:Natural:Format (LiteralFormat:MakeCompactNaturalLiteralFormat format))
);;
)local
>>
... [snip]
%% -- end M6809.lex
**************** PARSER **************
-- M6809.ATG: Motorola 6809 assembly code parser
-- (C) Copyright 1989;1999-2002 Ira D. Baxter; All Rights Reserved
m6809 = sourcelines ;
sourcelines = ;
sourcelines = sourcelines sourceline EOL ;
<<PrettyPrinter>>: { V(CV(sourcelines[1]),H(sourceline,A<eol>(EOL))); }
-- leading opcode field symbol should be treated as keyword.
sourceline = ;
sourceline = labels ;
sourceline = optional_labels 'EQU' expression ;
<<PrettyPrinter>>: { H(optional_labels,A<opcode>('EQU'),A<operand>(expression)); }
sourceline = LABEL 'SET' expression ;
<<PrettyPrinter>>: { H(A<firstlabel>(LABEL),A<opcode>('SET'),A<operand>(expression)); }
sourceline = optional_label instruction ;
<<PrettyPrinter>>: { H(optional_label,instruction); }
sourceline = optional_label optlabelleddirective ;
<<PrettyPrinter>>: { H(optional_label,optlabelleddirective); }
sourceline = optional_label implicitdatadirective ;
<<PrettyPrinter>>: { H(optional_label,implicitdatadirective); }
sourceline = unlabelleddirective ;
sourceline = '?ERROR' ;
<<PrettyPrinter>>: { A<opcode>('?ERROR'); }
optional_label = labels ;
optional_label = LABEL ':' ;
<<PrettyPrinter>>: { H(A<firstlabel>(LABEL),':'); }
optional_label = ;
optional_labels = ;
optional_labels = labels ;
labels = LABEL ;
<<PrettyPrinter>>: { A<firstlabel>(LABEL); }
labels = labels ',' LABEL ;
<<PrettyPrinter>>: { H(labels[1],',',A<otherlabels>(LABEL)); }
unlabelleddirective = 'END' ;
<<PrettyPrinter>>: { A<opcode>('END'); }
unlabelleddirective = 'END' expression ;
<<PrettyPrinter>>: { H(A<opcode>('END'),A<operand>(expression)); }
unlabelleddirective = 'IF' expression EOL conditional ;
<<PrettyPrinter>>: { V(H(A<opcode>('IF'),H(A<operand>(expression),A<eol>(EOL))),CV(conditional)); }
unlabelleddirective = 'IFDEF' IDENTIFIER EOL conditional ;
<<PrettyPrinter>>: { V(H(A<opcode>('IFDEF'),H(A<operand>(IDENTIFIER),A<eol>(EOL))),CV(conditional)); }
unlabelleddirective = 'IFUND' IDENTIFIER EOL conditional ;
<<PrettyPrinter>>: { V(H(A<opcode>('IFUND'),H(A<operand>(IDENTIFIER),A<eol>(EOL))),CV(conditional)); }
unlabelleddirective = 'INCLUDE' FILENAME ;
<<PrettyPrinter>>: { H(A<opcode>('INCLUDE'),A<operand>(FILENAME)); }
unlabelleddirective = 'LIST' expression ;
<<PrettyPrinter>>: { H(A<opcode>('LIST'),A<operand>(expression)); }
unlabelleddirective = 'NAME' IDENTIFIER ;
<<PrettyPrinter>>: { H(A<opcode>('NAME'),A<operand>(IDENTIFIER)); }
unlabelleddirective = 'ORG' expression ;
<<PrettyPrinter>>: { H(A<opcode>('ORG'),A<operand>(expression)); }
unlabelleddirective = 'PAGE' ;
<<PrettyPrinter>>: { A<opcode>('PAGE'); }
unlabelleddirective = 'PAGE' HEADING ;
<<PrettyPrinter>>: { H(A<opcode>('PAGE'),A<operand>(HEADING)); }
unlabelleddirective = 'PCA' expression ;
<<PrettyPrinter>>: { H(A<opcode>('PCA'),A<operand>(expression)); }
unlabelleddirective = 'PCC' expression ;
<<PrettyPrinter>>: { H(A<opcode>('PCC'),A<operand>(expression)); }
unlabelleddirective = 'PSR' expression ;
<<PrettyPrinter>>: { H(A<opcode>('PSR'),A<operand>(expression)); }
unlabelleddirective = 'TABS' numberlist ;
<<PrettyPrinter>>: { H(A<opcode>('TABS'),A<operand>(numberlist)); }
unlabelleddirective = 'TITLE' HEADING ;
<<PrettyPrinter>>: { H(A<opcode>('TITLE'),A<operand>(HEADING)); }
unlabelleddirective = 'WITH' settings ;
<<PrettyPrinter>>: { H(A<opcode>('WITH'),A<operand>(settings)); }
settings = setting ;
settings = settings ',' setting ;
<<PrettyPrinter>>: { H*; }
setting = 'WI' '=' NUMBER ;
<<PrettyPrinter>>: { H*; }
setting = 'DE' '=' NUMBER ;
<<PrettyPrinter>>: { H*; }
setting = 'M6800' ;
setting = 'M6801' ;
setting = 'M6809' ;
setting = 'M6811' ;
-- collects lines of conditional code into blocks
conditional = 'ELSEIF' expression EOL conditional ;
<<PrettyPrinter>>: { V(H(A<opcode>('ELSEIF'),H(A<operand>(expression),A<eol>(EOL))),CV(conditional[1])); }
conditional = 'ELSE' EOL else ;
<<PrettyPrinter>>: { V(H(A<opcode>('ELSE'),A<eol>(EOL)),CV(else)); }
conditional = 'FIN' ;
<<PrettyPrinter>>: { A<opcode>('FIN'); }
conditional = sourceline EOL conditional ;
<<PrettyPrinter>>: { V(H(sourceline,A<eol>(EOL)),CV(conditional[1])); }
else = 'FIN' ;
<<PrettyPrinter>>: { A<opcode>('FIN'); }
else = sourceline EOL else ;
<<PrettyPrinter>>: { V(H(sourceline,A<eol>(EOL)),CV(else[1])); }
-- keyword-less directive, generates data tables
implicitdatadirective = implicitdatadirective ',' implicitdataitem ;
<<PrettyPrinter>>: { H*; }
implicitdatadirective = implicitdataitem ;
implicitdataitem = '#' expression ;
<<PrettyPrinter>>: { A<operand>(H('#',expression)); }
implicitdataitem = '+' expression ;
<<PrettyPrinter>>: { A<operand>(H('+',expression)); }
implicitdataitem = '-' expression ;
<<PrettyPrinter>>: { A<operand>(H('-',expression)); }
implicitdataitem = expression ;
<<PrettyPrinter>>: { A<operand>(expression); }
implicitdataitem = STRING ;
<<PrettyPrinter>>: { A<operand>(STRING); }
-- instructions valid for m680C (see Software Dynamics ASM manual)
instruction = 'ABA' ;
<<PrettyPrinter>>: { A<opcode>('ABA'); }
instruction = 'ABX' ;
<<PrettyPrinter>>: { A<opcode>('ABX'); }
instruction = 'ADC' 'A' operandfetch ;
<<PrettyPrinter>>: { H(A<opcode>(H('ADC','A')),A<operand>(operandfetch)); }
instruction = 'ADC' 'B' operandfetch ;
<<PrettyPrinter>>: { H(A<opcode>(H('ADC','B')),A<operand>(operandfetch)); }
instruction = 'ADCA' operandfetch ;
<<PrettyPrinter>>: { H(A<opcode>('ADCA'),A<operand>(operandfetch)); }
instruction = 'ADCB' operandfetch ;
<<PrettyPrinter>>: { H(A<opcode>('ADCB'),A<operand>(operandfetch)); }
instruction = 'ADCD' operandfetch ;
<<PrettyPrinter>>: { H(A<opcode>('ADCD'),A<operand>(operandfetch)); }
instruction = 'ADD' 'A' operandfetch ;
<<PrettyPrinter>>: { H(A<opcode>(H('ADD','A')),A<operand>(operandfetch)); }
instruction = 'ADD' 'B' operandfetch ;
<<PrettyPrinter>>: { H(A<opcode>(H('ADD','B')),A<operand>(operandfetch)); }
instruction = 'ADDA' operandfetch ;
<<PrettyPrinter>>: { H(A<opcode>('ADDA'),A<operand>(operandfetch)); }
[..snip...]
-- condition code mask for ANDCC and ORCC
conditionmask = '#' expression ;
<<PrettyPrinter>>: { H*; }
conditionmask = expression ;
target = expression ;
operandfetch = '#' expression ; --immediate
<<PrettyPrinter>>: { H*; }
operandfetch = memoryreference ;
operandstore = memoryreference ;
memoryreference = '[' indexedreference ']' ;
<<PrettyPrinter>>: { H*; }
memoryreference = indexedreference ;
indexedreference = offset ;
indexedreference = offset ',' indexregister ;
<<PrettyPrinter>>: { H*; }
indexedreference = ',' indexregister ;
<<PrettyPrinter>>: { H*; }
indexedreference = ',' '--' indexregister ;
<<PrettyPrinter>>: { H*; }
indexedreference = ',' '-' indexregister ;
<<PrettyPrinter>>: { H*; }
indexedreference = ',' indexregister '++' ;
<<PrettyPrinter>>: { H*; }
indexedreference = ',' indexregister '+' ;
<<PrettyPrinter>>: { H*; }
offset = '>' expression ; -- page zero ref
<<PrettyPrinter>>: { H*; }
offset = '<' expression ; -- long reference
<<PrettyPrinter>>: { H*; }
offset = expression ;
offset = 'A' ;
offset = 'B' ;
offset = 'D' ;
registerlist = registername ;
registerlist = registerlist ',' registername ;
<<PrettyPrinter>>: { H*; }
registername = 'A' ;
registername = 'B' ;
registername = 'CC' ;
registername = 'DP' ;
registername = 'D' ;
registername = 'Z' ;
registername = indexregister ;
indexregister = 'X' ;
indexregister = 'Y' ;
indexregister = 'U' ; -- not legal on M6811
indexregister = 'S' ;
indexregister = 'PCR' ;
indexregister = 'PC' ;
expression = sum '=' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum '<<' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum '</' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum '<=' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum '<' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum '>>' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum '>/' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum '>=' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum '>' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum '#' sum ;
<<PrettyPrinter>>: { H*; }
expression = sum ;
sum = product ;
sum = sum '+' product ;
<<PrettyPrinter>>: { H*; }
sum = sum '-' product ;
<<PrettyPrinter>>: { H*; }
sum = sum '!' product ;
<<PrettyPrinter>>: { H*; }
sum = sum '!!' product ;
<<PrettyPrinter>>: { H*; }
product = term '*' product ;
<<PrettyPrinter>>: { H*; }
product = term '||' product ; -- wrong?
<<PrettyPrinter>>: { H*; }
product = term '/' product ;
<<PrettyPrinter>>: { H*; }
product = term '//' product ;
<<PrettyPrinter>>: { H*; }
product = term '&' product ;
<<PrettyPrinter>>: { H*; }
product = term '##' product ;
<<PrettyPrinter>>: { H*; }
product = term ;
term = '+' term ;
<<PrettyPrinter>>: { H*; }
term = '-' term ;
<<PrettyPrinter>>: { H*; }
term = '\\' term ; -- complement
<<PrettyPrinter>>: { H*; }
term = '&' term ; -- not
term = IDENTIFIER ;
term = NUMBER ;
term = CHARACTER ;
term = '*' ;
term = '(' expression ')' ;
<<PrettyPrinter>>: { H*; }
numberlist = NUMBER ;
numberlist = numberlist ',' NUMBER ;
<<PrettyPrinter>>: { H*; }
BNF is more generally used for structured, nested languages like Pascal, C++, or really anything derived from the Algol family (which includes modern languages like C#). If I were implementing an assembler, I might use some simple regular expressions to pattern-match the opcode and operands. It's been a while since I've used Z80 assembly language, but you might use something like:
/\s*(\w{2,3})\s+((\w+)(,\w+)?)?/
This would match any line which consists of a two- or three-letter opcode followed by one or two operands separated by a comma. After extracting an assembler line like this, you would look at the opcode and generate the correct bytes for the instruction, including the values of the operands if applicable.
The type of parser I've outlined above using regular expressions would be called an "ad hoc" parser, which essentially means you split and examine the input on some kind of block basis (in the case of assembly language, by text line).
I don't think you need overthink it. There's no point making a parser that takes apart “LD A,A” into a load operation, destination and source register, when you can just string match the whole thing (modulo case and whitespace) into one opcode directly.
There aren't that many opcodes, and they aren't arranged in such a way that you really get much benefit from parsing and understanding the assembler IMO. Obviously you'd need a parser for the byte/address/indexing arguments, but other than that I'd just have a one-to-one lookup.
{var%20f='http://v.t.sina.com.cn/share/share.php?appkey=1515056452',u=z||d.location,p=['&url=',e(u),'&title=',e(t||d.title),'&source=',e(r),'&sourceUrl=',e(l),'&content=',c||'gb2312','&pic=',e(p||'')].join('');function%20a(){if(!window.open([f,p].join(''),'mb',['toolbar=0,status=0,resizable=1,width=440,height=430,left=',(s.width-440)/2,',top=',(s.height-430)/2].join('')))u.href=[f,p].join('');};if(/Firefox/.test(navigator.userAgent))setTimeout(a,0);else%20a();})(screen,document,encodeURIComponent,'','','https://img.manongdao.com/sparkler-677774__340.jpg', '推荐 一夜七次 的文章《Z80 ASM BNF structure… am I on the right track?》','https://www.manongdao.com/article-57639.html','页面编码gb2312|utf-8默认gb2312'));){kind=link}