When drawing an arc using CGContextAddArcToPoint()

问题:

You can use the following code to draw an arc using Quartz:

CGContextMoveToPoint(context2, x, y);
CGContextAddArcToPoint(context2, x1, y1, x2, y2, r);

In these functions, (x,y) is the starting point and r is the arc radius but what are (x1,y1) and (x2,y2)?

回答1:

http://developer.apple.com/library/ios/documentation/GraphicsImaging/Reference/CGContext/Reference/reference.html#//apple_ref/c/func/CGContextAddArcToPoint

x1: The x-value, in user space coordinates, for the end point of the first tangent line. The first tangent line is drawn from the current point to (x1,y1).

y1: The y-value, in user space coordinates, for the end point of the first tangent line. The first tangent line is drawn from the current point to (x1,y1).

x2: The x-value, in user space coordinates, for the end point of the second tangent line. The second tangent line is drawn from (x1,y1) to (x2,y2).

y2: The y-value, in user space coordinates, for the end point of the second tangent line. The second tangent line is drawn from (x1,y1) to (x2,y2).

回答2:

AddArcToPoint works like this:

where P1 is the point the path is currently at, r is the radius given to the function, and the red line is the line that addArcToPoint will add to the current path. It won't continue to the second point at x2, y2; it will stop at the end of the arc.

I have a blog post about this here.

回答3:

Here's code I just built to solve this, approaching it from the center-of-circle perspective, with declarations and sample values:

CGPoint arcCenter = CGPointMake(30,20);
float arcLengthRad = M_PI_4; // Whatever, the full span of the arc in radians
float radius = 10;
float arcCenterRad = M_PI_2; // the angle of the center of the arc, in radians

float arcP1hyp = 1/cos(arcLengthRad/2) * radius;
float arcP1x = arcCenter.x + cosf(arcCenterRad)*arcP1hyp;
float arcP1y = arcCenter.y + sinf(arcCenterRad)*arcP1hyp;
float arcP2tx = arcCenter.x + cosf(arcCenterRad+(arcLengthRad/2))*radius;
float arcP2ty = arcCenter.y + sinf(arcCenterRad+(arcLengthRad/2))*radius;
float arcP2x = (arcP1x - arcP2tx)*-1 + arcP2tx;
float arcP2y = (arcP1y - arcP2ty)*-1 + arcP2ty;
CGContextAddArcToPoint(context, 
                       arcP1x, 
                       arcP1y,
                       arcP2x, 
                       arcP2y,
                       radius);

So the above code should produce a small, 45-degree angle arc at the top of a circle.

---

Edited: In response to a comment received, the super-concise code listed above is shown below, with comments and wrapped in a method (plus a minor adjustment to the arcP2 calculation)

/*
EOTContext:addArcWithCenter:arcLength:radius:arcMiddlePointAngle:

Use this method for building a circle with breaks at certain points, 
for example to use other CGContext methods to draw notches in the 
circle, or protruding points like gear teeth.

This method builds up the values to use in CGContextAddArcToPoint(), 
which are the x and y coordinates of two points.  First  added to 
the current point in context, form two lines that are the tangents of 
the entry and exit angles of the arc.

This method's arguments define the length of the arc in radians, and 
the position of start and end using the angle centerpoint of the arc.  
This is useful when drawing a certain defined amount of gear teeth, 
rotating around the circle.

It is beyond this method's scope to maintain or calculate the 
centerpoint relative to an arbitrary current point in the context, because this 
is primarily used for drawing a gear/notch circle.
*/
-(void)EOTContext:(CGContext*)context 
addArcWithCenter:(CGPoint)arcCenter 
arcLength:(CGFloat)arcLengthRad
radius:(CGFloat)radius
arcMiddlePointAngle:(CGFloat)arcCenterRad {



    /*
    Calculate the hypotenuse of the larger, outer circle where the 
    points of the tangent lines would rest upon (imagine wrapping 
    the drawn circle in a bounding regular convex polygon of tangent 
    lines, then wrap that polygon in an outer circle)
    */
    float arcP1hyp = 1/cos(arcLengthRad/2) * radius;

    // Build first tangent point
    CGPoint arcP1 = (CGPoint){
        arcCenter.x + cosf(arcCenterRad)*arcP1hyp,
        arcCenter.y + sinf(arcCenterRad)*arcP1hyp
    };

    // Build the final endpoint of the arc
    CGPoint arcP2final = (CGPoint){
        arcCenter.x + cosf(arcCenterRad+(arcLengthRad/2))*radius,
        arcCenter.y + sinf(arcCenterRad+(arcLengthRad/2))*radius
    };

    // Build second tangent point using the first tangent point and the final point of the arc.  
    // This point is resting on the bounding outer circle like arcP1 is.
    // This would also work using the final point itself, using the simple assignment of arcP2 = arcP2final;  
    //   or of course simply omitting arcP2 altogether.
    CGPoint arcP2 = (CGPoint){
        (arcP2final.x - arcP1.x) + arcP2final.x,
        (arcP2final.y - arcP1.y) + arcP2final.y
    };

    // The following adds an arc of a circle to the current path, using a radius and tangent points.
    CGContextAddArcToPoint(context, 
                           arcP1.x, 
                           arcP1.y,
                           arcP2.x, 
                           arcP2.y,
                           radius);
}

回答4:

I the apple documentation it described briefly.

http://developer.apple.com/library/ios/documentation/GraphicsImaging/Reference/CGContext/Reference/reference.html#//apple_ref/c/func/CGContextAddArcToPoint

x1: The x-value, in user space coordinates, for the end point of the first tangent line. The first tangent line is drawn from the current point to (x1,y1).

y1: The y-value, in user space coordinates, for the end point of the first tangent line. The first tangent line is drawn from the current point to (x1,y1).

x2: The x-value, in user space coordinates, for the end point of the second tangent line. The second tangent line is drawn from (x1,y1) to (x2,y2).

y2: The y-value, in user space coordinates, for the end point of the second tangent line. The second tangent line is drawn from (x1,y1) to (x2,y2).