Pycharm error Django is not importable in this env

问题:

I'm getting the following errors in Pycharm.

Error: Django is not importable in this environment

It used to work well but I moved the project and virtualenv to other directory and the error appeared. It's weird because if I run the project ignoring the configuration settings warning that I get, works fine.

The problem is that now, Pycharm is not finding the project interperter.

The command that Pycharm is running is:

/Users/plorenzo/../gestorSchools/venv/bin/python3.4 /Users/plorenzo/../gestorSchools/schoolsManager/manage.py runserver 8000

The virtualenv is activated.

My $PATH is:

/Users/plorenzo/../gestorSchools/venv/bin:/Library/Frameworks/Python.framework/Versions/3.4/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin

and my $PYTHONPATH:

/Library/Frameworks/Python.framework/Versions/3.4/bin/python3.4

I spent a few days trying to find the solution but I couldn't find it.

回答1:

In my case I had to go to Settings (Alt+F7, or the Spanner/Cog icon) and select a Python interpreter which has Django installed alongside it.

If Django isn't already installed, you should be able to install it via the green + icon (not shown below) once an interpreter has been selected.

回答2:

I finally found the error. The problem was that one folder name in the virtualenv path had an accent.

This is the old path:

/Users/plorenzo/../telefónica/gestorSchools/venv

This is the new one that works:

/Users/plorenzo/../telefonica/gestorSchools/venv

回答3:

Project interpreter, which is being used in the pycharm setting , doesn't have the django package installed. So go to

setting->Project->project interpreter

Then install django package

it will work :)

回答4:

It might seem obvious, but try quitting and then re-starting the PyCharm application. When I had this issue, I continued to get the "Django is not importable in this environment" error even though the project interpreter path was correct. Nothing worked until I closed and re-opened the application. Hope this saves someone some time.

回答5:

Yet another case, where my virtualenv did have Django installed, but Pycharm would still display this error.

I eventually found out that the same virtualenv path had been duplicated in the list of available interpreters. Removing all of them and re-adding fixed it.

The duplication happened after I copied the .idea from another machine, and re-created the virtualenv from Pycharm although it was already listed as a (broken) interpreter.

回答6:

I got the same issue on OS X, and to fix it, I had to use an absolute path for the project interpreter

/Users/myself/Projects/... is ok ~/Projects/... was not working

回答7:

I had similar problem...

I go PyCharm -> Preferences and tried to readd Django to project interpreter packages. PyCharm suddenly added everything in requirements.txt file. And now I can run project without any problem.

回答8:

In my case, I was running the Cygwin version of Python when this error came up. Fixing it involved just adding some of cygwin's bin paths to Window's Path variable.

Run "control sysdm.cpl" Go to the "Advanced" tab Click the "Environmental Variables" button at the bottom of this tab Find "Path" under "System Variables" Add to it ;c:/cygwin/bin;c:/cygwin/sbin;c:/cygwin/usr/local/bin

I did not include /usr/bin, as for some reason, it is combined in to the /bin directory when viewing in windows.

回答9:

As everybody said ,Check for your interpreter Was it properly configured it or not.If you created your project in virtual environment ,make sure you configured the correct python interpreter or not .The python interpreter(whole) and python interpreter(for only single project using virtualenv) are different .

If you are using PyCharm Go to Setting->Project->project interpreter and pick the right interpreter Once you are done with that ,run the project if it runs,all set .if not check for the Edit configurations and check again for the interpreter

回答10:

Ok, in my case the solution was:

1. Install django
2. Use @cbueche suggestion to remove the ~
3. Switch to a another project's venv and switch back to my venv for this project

I exited and reloaded the project a few times in there so that might also be necessary. I love PyCharm but starting a new project is always painful.

回答11:

you have to edit your project configuration for that. Environemt->Environment variables set varable DJANGO_SETTINGS_MODULE=project_name.settings

回答12:

I had the same problem and it was due to having more than one project interpreter defined in the project. In my case I had a python 2.7 and a python 3.7 interpreter. Fixed this issue by removing the python 2.7 interpreter.

1. View the current interpreter by navigating to Preferences > Project > Project Interpreter

2. Open the dropdown and select Show All...

3. Remove any interpreters that aren't your primary