Use adb over tcpip in Android Studio?

问题:

Is it possible to show the adb logcat for a tcpip device in Android Studio? I am writing a application that utilizes the USB port and I cannot use it for adb usb.

Currently, I am using the following instruction to view the logcat in Command Prompt, but it would be nice if this was integrated into AS: http://developer.android.com/tools/help/adb.html#wireless

回答1:

After some testing Android Studio already supports this. You just need perform the following ADB commands, and now you can see the logcat and even wirelessly load your application. No USB cable needed!

From: http://developer.android.com/tools/help/adb.html#wireless

$ adb tcpip 5555
restarting in TCP mode port: 5555

Finding out IP address of Android device prior to running Android Oreo:

Settings -> About tablet -> Status -> IP address. Remember the IP address, of the form #.#.#.#.

Finding out IP address of Android device running Android Oreo

Settings -> Wi-Fi -> -> IP address

Connect adb host to device:

$ adb connect #.#.#.#
connected to #.#.#.#:5555

回答2:

In android studio, you can create a one click solution.

1. Go to File > Settings > Tools > External Tools
2. Create a tool with the following settings, making sure to replace the path to adb with your path

3. Press Ok and save the tool

4. In Android studio, click Tools > External Tools > Android Over Wifi

5. A prompt similar to this should pop up and you can type your phone's IP address here. (You can get this address from your phone when you enable ADB over network)

6. After you enter the information required, you should now be connected. Congratz and enjoy wireless debugging :).

回答3:

It's simple, open Terminal inside Android Studio and then type

adb connect "your IP address"

That's all. Remember that to use adb wireless your device must be root

回答4:

I was given an Gigabyte Box with Android OS on it. The box had a USB and Ethernet port. These are instructions for getting my Windows 7 PC to connect with Android OS in order to see Debug Output on Android Studio.

How to use the USB port to debug:

1) Open Command Prompt

2) Go to wherever you stored adb.exe file

3) Type in “adb connect (Your Gateway’s IP Address)”. For example, "adb connect 192.168.1.94".

The IP address of the Android device can be found in Settings icon-> About tablet -> Status ->IP Address

If you’re in the adb.exe directory, other adb commands include:

1) adb devices= Finds all devices currently connected to your computer.

2) adb kill-server= Disconnects the devices

---

Ethernet Port to Debug:

http://www.techrepublic.com/blog/software-engineer/debug-android-applications-over-ethernet/

1) Open a command prompt and navigate to the directory where your copy of ADB.exe lives.

2) Type "adb tcpip 5555" and press Enter.

3) Type "adb connect 1.1.1.1:5555", replacing the 1.1.1.1 with your phone or tablet's IP address.

---

回答5:

adb devices

adb tcpip 5555

adb connect 192.168.4.23

Unplug you device and run the adb connect 192.128.4.23 command again

For further details Check this article