Trying to figure out a way in my bash script to check if a file is an animated PNG (apng) file. In my case I want to ignore it if it is . Any ideas ?
UPDATE:
The answer below using pngcheck allowed me to check if the image was an animation. In addition I check the size of the file, if it's "large" I ignore it as well. Lastly, as of Nov 2017, "identify" does NOT work which was my initial issue mainly. Thanks Mark for your help.
An animated PNG is characterised by the presence of an acTL
(Animation Control Chunk), and fcTL
(Frame Control Chunks) - see Wikipedia article.
So, I think a suitable test would be to run pngcheck
with the verbose option, and look for at least the acTL
chunk:
pngcheck -v animated.png | grep -E "acTL|fcTL"
Sample Output
chunk acTL at offset 0x00025, length 8
chunk fcTL at offset 0x00039, length 26
chunk fcTL at offset 0x02f27, length 26
chunk fcTL at offset 0x05901, length 26
chunk fcTL at offset 0x083a2, length 26
chunk fcTL at offset 0x0aea8, length 26
chunk fcTL at offset 0x0d98c, length 26
chunk fcTL at offset 0x10406, length 26
chunk fcTL at offset 0x12e19, length 26
chunk fcTL at offset 0x15985, length 26
chunk fcTL at offset 0x185e2, length 26
chunk fcTL at offset 0x1b2b0, length 26
chunk fcTL at offset 0x1dfe1, length 26
chunk fcTL at offset 0x20d24, length 26
chunk fcTL at offset 0x23a03, length 26
chunk fcTL at offset 0x26663, length 26
chunk fcTL at offset 0x29218, length 26
chunk fcTL at offset 0x2bcdf, length 26
chunk fcTL at offset 0x2e7e0, length 26
chunk fcTL at offset 0x312b0, length 26
chunk fcTL at offset 0x33c51, length 26
chunk fcTL at offset 0x36598, length 26
chunk fcTL at offset 0x38f49, length 26
chunk fcTL at offset 0x3b9bd, length 26
chunk fcTL at offset 0x3e45e, length 26
chunk fcTL at offset 0x40ed9, length 26
chunk fcTL at offset 0x4393c, length 26
chunk fcTL at offset 0x46521, length 26
chunk fcTL at offset 0x4919b, length 26
chunk fcTL at offset 0x4bde2, length 26
chunk fcTL at offset 0x4eabd, length 26
chunk fcTL at offset 0x51827, length 26
chunk fcTL at offset 0x5453a, length 26
chunk fcTL at offset 0x571c7, length 26
chunk fcTL at offset 0x59d94, length 26
So, that would suggest this test in a script:
# Test an animated image, `grep` exit status is zero meaning `acTL` was found
pngcheck -v animated.png | grep -q "acTL"
echo $?
0
# Test a still image, `grep` exit status is 1 meaning `acTL` was not found
pngcheck -v still.png | grep -q "acTL"
echo $?
1
If you don't have, or don't want to ship pngcheck
with your project, I made a little Perl script that just de-chunks a PNG file and tells you the chunks and offsets and it should run anywhere since it is Perl. You are welcome to use it.
Sample Run
./pngchunks ball.png
13 IHDR
8 acTL <--- This one means it is animated
26 fcTL
4634 IDAT
26 fcTL
4344 fdAT
26 fcTL
4042 fdAT
26 fcTL
3828 fdAT
26 fcTL
3521 fdAT
26 fcTL
3168 fdAT
26 fcTL
2777 fdAT
26 fcTL
2588 fdAT
26 fcTL
2720 fdAT
26 fcTL
2792 fdAT
26 fcTL
2665 fdAT
26 fcTL
2581 fdAT
26 fcTL
2652 fdAT
26 fcTL
2774 fdAT
26 fcTL
2844 fdAT
26 fcTL
2886 fdAT
26 fcTL
2966 fdAT
26 fcTL
3197 fdAT
26 fcTL
3518 fdAT
26 fcTL
3995 fdAT
0 IEND
#!/usr/bin/perl -w
################################################################################
# pngchunks
# Mark Setchell
#
# Simple Perl tool to read the chunks in a PNG image file
# See https://en.wikipedia.org/wiki/Portable_Network_Graphics
#
# Usage: pngchunks image.png
################################################################################
use strict;
use Fcntl qw( SEEK_CUR );
my $f=shift or die "Usage: pngchunks image.png\n";
my ($handle,$offset,$buffer,$type,$length);
# Open file
open($handle,'<',$f) || die("Error opening file\n");
# Check 8 byte PNG signature
read($handle,$buffer,8);
if(substr($buffer,0,8) ne "\x89\x50\x4e\x47\x0d\x0a\x1a\x0a"){
die("ERROR: Invalid PNG signature\n");
}
# Loop till IEND chunk
for(;;){
# Read 4 bytes of length, Network (big-endian)
read($handle,$buffer,4);
$length=unpack("N",$buffer);
# Read 4 bytes of chunk type
read($handle,$buffer,4);
$type=substr($buffer,0,4);
printf("%d %s\n",$length,$type);
# Break out of loop if IEND chunk
last if $type eq "IEND";
# Seek past this chunk and its 4 byte CRC
$offset=4+$length;
seek($handle,$offset,SEEK_CUR);
}
I don't see a "good" way to do this, so I'm going to cheat. First, my attempts:
Two test images: An elephant and a ball. They're actually quite distracting, so I'll let you open them separately rather than including them here (I just burned a whole minute staring blankly at them).
Let's rename them elephant.apng
and ball.apng
for simplicity.
$ file elephant.apng ball.apng
elephant.apng: PNG image data, 480 x 400, 8-bit/color RGBA, non-interlaced
ball.apng: PNG image data, 100 x 100, 8-bit/color RGBA, non-interlaced
$ file -b --mime-type elephant.apng ball.apng
image/png
image/png
$ identify elephant.apng ball.apng
elephant.apng PNG 480x400 480x400+0+0 8-bit sRGB 379KB 0.000u 0:00.000
ball.apng PNG 100x100 100x100+0+0 8-bit sRGB 65.6KB 0.000u 0:00.000
$ strings elephant.apng |grep -i png
APNG Assembler 2.8Q\
$ strings ball.apng |grep -i png
$
So libmagic (File 5.32, either without options or by requesting a MIME type) and identify (ImageMagick 6.9.7-4) and strings (GNU Binutils 2.29.1) with grep (GNU grep 3.1) all fail to find anything aside from a watermark left by APNG Assembler, which can't be guaranteed.
Now let's cheat. I'm going to assume that lots of entropy means it's an animated PNG (rather than something else, like a steganographic message) and merely run this through ImageMagic convert
to turn it into a standard PNG:
$ convert elephant.apng elephant.png
$ convert ball.apng ball.png
$ wc -c *
65557 ball.apng
5239 ball.png
379013 elephant.apng
21068 elephant.png
470877 total
Okay, we can work with that:
#!/bin/sh
for image in "$@"; do
size1="$(wc -c "$image")"
size2="$(convert "$image" -format PNG - |wc -c)"
if [ "$size1" -ge "$((size2*2))" ]
then echo "$image: Animated or steganographic PNG"
else echo "$image: Basic PNG"
fi
done
This sets size1
to the size of the image in bytes (using wc -c
to get the character count), then sets size2
to the size of the image after "converting" it to a PNG (-
tells convert to push the final image to standard output and wc
reads that in). If size1
is at least twice as big as size2
then we assume it's an animated PNG.
That's in a loop, so you can call it on any number of image files (even non-PNGs, though that doesn't make much sense and you'll always be told it's a PNG of some sort). Note, you can't pipe into it because it'd absorb standard input on the first wc
call and have nothing left over for the conversion.
If you have MediaInfo installed (e.g. apt install mediainfo
), you can (temporarily!) detect something amiss with this command:
$ mediainfo elephant.apng |grep ^FileExtension_Invalid
FileExtension_Invalid : png pns
$ mediainfo ball.apng |grep ^FileExtension_Invalid
FileExtension_Invalid : png pns
I'm not exactly sure what that means, but it doesn't show up on my converted PNGs, so it might be safe … at least until MediaInfoLib actually support APNG file formats (this is why I said "temporarily"). This works in v0.7.99 at least.
Invoke as grep -q
to make that silent for your if
tests.
First extract the extension of your file using expr
.
Check http://tldp.org/LDP/abs/html/string-manipulation.html:
expr match "$string" '.*\($substring\)'
Extracts $substring
at end of $string
, where $substring
is a regular expression.
Then compare extracted extension with ".png"