What is a regular expression which will match a va

问题:

Firstly sorry for the 10,000th RegEx question,

I realise there are other domain related questions but the regex is either not working properly, too complex, or for urls with subdomains, protocols, and filepaths.

Mine is more simple, I need to validate a domain name:

google.com

stackoverflow.com

So a domain in its rawest form - not even a subdomain like www.

1. Characters should only be a-z | A-Z | 0-9 and period(.) and dash(-)
2. The domain name part should not start or end with dash (-) (e.g. -google-.com)
3. The domain name part should be between 1 and 63 characters long
4. The extension (TLD) can be anything under #1 rules for now, I may validate them against a list later, it should be 1 or more characters though

Edit: TLD is apparently 2-6 chars as it stands

no. 4 revised: TLD should actually be labelled \"subdomain\" as it should include things like .co.uk -- I would imagine the only validation possible (apart from checking against a list) would be \'after the first dot there should be one or more characters under rules #1

Thanks very much, believe me I did try!

回答1:

Well, it\'s pretty straightforward a little sneakier than it looks (see comments), given your specific requirements:

/^[a-zA-Z0-9][a-zA-Z0-9-]{1,61}[a-zA-Z0-9]\\.[a-zA-Z]{2,}$/

But note this will reject a lot of valid domains.

回答2:

I know that this is a bit of an old post, but all of the regular expressions here are missing one very important component: the support for IDN domain names.

IDN domain names start with xn--. They enable extended UTF-8 characters in domain names. For example, did you know \"♡.com\" is a valid domain name? Yeah, \"love heart dot com\"! To validate the domain name, you need to let http://xn--c6h.com/ pass the validation.

Note, to use this regex, you will need to convert the domain to lower case, and also use an IDN library to ensure you encode domain names to ACE (also known as \"ASCII Compatible Encoding\"). One good library is GNU-Libidn.

idn(1) is the command line interface to the internationalized domain name library. The following example converts the host name in UTF-8 into ACE encoding. The resulting URL https://nic.xn--flw351e/ can then be used as ACE-encoded equivalent of https://nic.谷歌/.

  $ idn --quiet -a nic.谷歌
  nic.xn--flw351e

This magic regular expression should cover most domains (although, I am sure there are many valid edge cases that I have missed):

^((?!-))(xn--)?[a-z0-9][a-z0-9-_]{0,61}[a-z0-9]{0,1}\\.(xn--)?([a-z0-9\\-]{1,61}|[a-z0-9-]{1,30}\\.[a-z]{2,})$

When choosing a domain validation regex, you should see if the domain matches the following:

1. xn--stackoverflow.com
2. stackoverflow.xn--com
3. stackoverflow.co.uk

If these three domains do not pass, your regular expression may be not allowing legitimate domains!

Check out The Internationalized Domain Names Support page from Oracle\'s International Language Environment Guide for more information.

Feel free to try out the regex here: http://www.regexr.com/3abjr

ICANN keeps a list of tlds that have been delegated which can be used to see some examples of IDN domains.

---

Edit:

 ^(((?!-))(xn--|_{1,1})?[a-z0-9-]{0,61}[a-z0-9]{1,1}\\.)*(xn--)?([a-z0-9\\-]{1,61}|[a-z0-9-]{1,30}\\.[a-z]{2,})$

This regular expression will stop domains that have \'-\' at the end of a hostname as being marked as being valid. Additionally, it allows unlimited subdomains.

回答3:

My RegEx is next:

^[a-zA-Z0-9][a-zA-Z0-9-_]{0,61}[a-zA-Z0-9]{0,1}\\.([a-zA-Z]{1,6}|[a-zA-Z0-9-]{1,30}\\.[a-zA-Z]{2,3})$

it\'s ok for i.oh1.me and for wow.british-library.uk

UPD

Here is updated rule

^(([a-zA-Z]{1})|([a-zA-Z]{1}[a-zA-Z]{1})|([a-zA-Z]{1}[0-9]{1})|([0-9]{1}[a-zA-Z]{1})|([a-zA-Z0-9][a-zA-Z0-9-_]{1,61}[a-zA-Z0-9]))\\.([a-zA-Z]{2,6}|[a-zA-Z0-9-]{2,30}\\.[a-zA-Z]{2,3})$

https://www.debuggex.com/r/y4Xe_hDVO11bv1DV

now it check for - or _ in the start or end of domain label.

回答4:

Just a minor correction - the last part should be up to 6. Hence,

^[a-z0-9]+([\\-\\.]{1}[a-z0-9]+)*\\.[a-z]{2,6}$

The longest TLD is museum (6 chars) - http://en.wikipedia.org/wiki/List_of_Internet_top-level_domains

回答5:

My bet:

^(?:[a-z0-9](?:[a-z0-9-]{0,61}[a-z0-9])?\\.)+[a-z0-9][a-z0-9-]{0,61}[a-z0-9]$

Explained:

Domain name is built from segments. Here is one segment (except final):

[a-z0-9](?:[a-z0-9-]{0,61}[a-z0-9])?

It can have 1-63 characters, does not start or end with \'-\'.

Now append \'.\' to it and repeat at least one time:

(?:[a-z0-9](?:[a-z0-9-]{0,61}[a-z0-9])?\\.)+

Then attach final segment, which is 2-63 characters long:

[a-z0-9][a-z0-9-]{0,61}[a-z0-9]

Test it here: http://regexr.com/3au3g

回答6:

Accepted answer not working for me, try this :

^((?!-)[A-Za-z0-9-]{1,63}(?<!-)\\.)+[A-Za-z]{2,6}$

Visit this Unit Test Cases for validation.

回答7:

This answer is for domain names (including service RRs), not host names (like an email hostname).

^(?=.{1,253}\\.?$)(?:(?!-|[^.]+_)[A-Za-z0-9-_]{1,63}(?<!-)(?:\\.|$)){2,}$

It is basically mkyong\'s answer and additionally:

• Max length of 255 octets including length prefixes and null root.
• Allow trailing \'.\' for explicit dns root.
• Allow leading \'_\' for service domain RRs, (bugs: doesn\'t enforce 15 char max for _ labels, nor does it require at least one domain above service RRs)
• Matches all possible TLDs.
• Doesn\'t capture subdomain labels.

By Parts

Lookahead, limit max length between ^$ to 253 characters with optional trailing literal \'.\'

(?=.{1,253}\\.?$)

Lookahead, next character is not a \'-\' and no \'_\' follows any characters before the next \'.\'. That is to say, enforce that the first character of a label isn\'t a \'-\' and only the first character may be a \'_\'.

(?!-|[^.]+_)

Between 1 and 63 of the allowed characters per label.

[A-Za-z0-9-_]{1,63}

Lookbehind, previous character not \'-\'. That is to say, enforce that the last character of a label isn\'t a \'-\'.

(?<!-)

Force a \'.\' at the end of every label except the last, where it is optional.

(?:\\.|$)

Mostly combined from above, this requires at least two domain levels, which is not quite correct, but usually a reasonable assumption. Change from {2,} to + if you want to allow TLDs or unqualified relative subdomains through (eg, localhost, myrouter, to.)

(?:(?!-|[^.]+_)[A-Za-z0-9-_]{1,63}(?<!-)(?:\\.|$)){2,}

Unit tests for this expression.

回答8:

Thank you for pointing right direction in domain name validation solutions in other answers. Domain names could be validated in various ways.

If you need to validate IDN domain in it\'s human readable form, regex \\p{L} will help. This allows to match any character in any language.

Note that last part might contain hyphens too! As punycode encoded Chineese names might have unicode characters in tld.

I\'ve came to solution which will match for example:

• google.com
• masełkowski.pl
• maselkowski.pl
• m.maselkowski.pl
• www.masełkowski.pl.com
• xn--masekowski-d0b.pl
• 中国互联网络信息中心.中国
• xn--fiqa61au8b7zsevnm8ak20mc4a87e.xn--fiqs8s

Regex is:

^[0-9\\p{L}][0-9\\p{L}-\\.]{1,61}[0-9\\p{L}]\\.[0-9\\p{L}][\\p{L}-]*[0-9\\p{L}]+$

Check and tune here

NOTE: This regexp is quite permissive, as is current domain names allowed character set.

UPDATE: Even more simplified, as a-aA-Z\\p{L} is same as just \\p{L}

NOTE2: The only problem is that it will match domains with double dots in it... , like masełk..owski.pl. If anyone know how to fix this please improve.

回答9:

^[a-z0-9]+([\\-\\.]{1}[a-z0-9]+)*\\.[a-z]{2,7}$

[domain - lower case letters and 0-9 only] [can have a hyphen] + [TLD - lower case only, must be beween 2 and 7 letters long]
http://rubular.com/ is brilliant for testing regular expressions!
Edit: Updated TLD maximum to 7 characters for \'.rentals\' as Dan Caddigan pointed out.

回答10:

Not enough rep yet to comment. In response to paka\'s solution, I found I needed to adjust three items:

• The dash and underscore were moved due to the dash being interpreted as a range (as in \"0-9\")
• Added a full stop for domain names with many subdomains
• Extended the potential length for the TLDs to 13

Before:

^(([a-zA-Z]{1})|([a-zA-Z]{1}[a-zA-Z]{1})|([a-zA-Z]{1}[0-9]{1})|([0-9]{1}[a-zA-Z]{1})|([a-zA-Z0-9][a-zA-Z0-9-_]{1,61}[a-zA-Z0-9]))\\.([a-zA-Z]{2,6}|[a-zA-Z0-9-]{2,30}\\.[a-zA-Z]{2,3})$

After:

^(([a-zA-Z]{1})|([a-zA-Z]{1}[a-zA-Z]{1})|([a-zA-Z]{1}[0-9]{1})|([0-9]{1}[a-zA-Z]{1})|([a-zA-Z0-9][-_\\.a-zA-Z0-9]{1,61}[a-zA-Z0-9]))\\.([a-zA-Z]{2,13}|[a-zA-Z0-9-]{2,30}\\.[a-zA-Z]{2,3})$

回答11:

^[a-zA-Z0-9][a-zA-Z0-9-]{1,61}[a-zA-Z0-9]\\.[a-zA-Z]+(\\.[a-zA-Z]+)$

回答12:

For new gTLDs

/^((?!-)[\\p{L}\\p{N}-]+(?<!-)\\.)+[\\p{L}\\p{N}]{2,}$/iu

回答13:

Here is complete code with example:

<?php
function is_domain($url)
{
    $parse = parse_url($url);
    if (isset($parse[\'host\'])) {
        $domain = $parse[\'host\'];
    } else {
        $domain = $url;
    }

    return preg_match(\'/^(?!\\-)(?:[a-zA-Z\\d\\-]{0,62}[a-zA-Z\\d]\\.){1,126}(?!\\d+)[a-zA-Z\\d]{1,63}$/\', $domain);
}

echo is_domain(\'example.com\'); //true
echo is_domain(\'https://example.com\'); //true
echo is_domain(\'https://.example.com\'); //false
echo is_domain(\'https://localhost\'); //false

回答14:

^((localhost)|((?!-)[A-Za-z0-9-]{1,63}(?<!-)\\.)+[A-Za-z]{2,253})$

Thank you @mkyong for the basis for my answer. I\'ve modified it to support longer acceptable labels.

Also, \"localhost\" is technically a valid domain name. I will modify this answer to accommodate internationalized domain names.

回答15:

/^((([a-zA-Z]{1,2})|([0-9]{1,2})|([a-zA-Z0-9]{1,2})|([a-zA-Z0-9][a-zA-Z0-9-]{1,61}[a-zA-Z0-9]))\\.)+[a-zA-Z]{2,6}$/

• ([a-zA-Z]{1,2}) -> for accepting only two characters.

• ([0-9]{1,2})-> for accepting two numbers only

if anything exceeds beyond two ([a-zA-Z0-9][a-zA-Z0-9-]{1,61}[a-zA-Z0-9]) this regex will take care of that.

If we want to do the matching for at least one time + will be used.

回答16:

^[a-zA-Z0-9][-a-zA-Z0-9]+[a-zA-Z0-9].[a-z]{2,3}(.[a-z]{2,3})?(.[a-z]{2,3})?$

Examples that work:

stack.com
sta-ck.com
sta---ck.com
9sta--ck.com
sta--ck9.com
stack99.com
99stack.com
sta99ck.com

It will also work for extensions

.com.uk
.co.in
.uk.edu.in

Examples that will not work:

-stack.com

it will work even with the longest domain extension \".versicherung\"