Play audio from a stream using C#

问题:

Is there a way in C# to play audio (for example, MP3) direcly from a System.IO.Stream that for instance was returend from a WebRequest without saving the data temporarily to the disk?

---

Solution with NAudio

With the help of NAudio 1.3 it is possible to:

1. Load an MP3 file from a URL into a MemoryStream
2. Convert MP3 data into wave data after it was completely loaded
3. Playback the wave data using NAudio\'s WaveOut class

It would have been nice to be able to even play a half loaded MP3 file, but this seems to be impossible due to the NAudio library design.

And this is the function that will do the work:

    public static void PlayMp3FromUrl(string url)
    {
        using (Stream ms = new MemoryStream())
        {
            using (Stream stream = WebRequest.Create(url)
                .GetResponse().GetResponseStream())
            {
                byte[] buffer = new byte[32768];
                int read;
                while ((read = stream.Read(buffer, 0, buffer.Length)) > 0)
                {
                    ms.Write(buffer, 0, read);
                }
            }

            ms.Position = 0;
            using (WaveStream blockAlignedStream =
                new BlockAlignReductionStream(
                    WaveFormatConversionStream.CreatePcmStream(
                        new Mp3FileReader(ms))))
            {
                using (WaveOut waveOut = new WaveOut(WaveCallbackInfo.FunctionCallback()))
                {
                    waveOut.Init(blockAlignedStream);
                    waveOut.Play();                        
                    while (waveOut.PlaybackState == PlaybackState.Playing )                        
                    {
                        System.Threading.Thread.Sleep(100);
                    }
                }
            }
        }
    }

回答1:

Edit: Answer updated to reflect changes in recent versions of NAudio

It\'s possible using the NAudio open source .NET audio library I have written. It looks for an ACM codec on your PC to do the conversion. The Mp3FileReader supplied with NAudio currently expects to be able to reposition within the source stream (it builds an index of MP3 frames up front), so it is not appropriate for streaming over the network. However, you can still use the MP3Frame and AcmMp3FrameDecompressor classes in NAudio to decompress streamed MP3 on the fly.

I have posted an article on my blog explaining how to play back an MP3 stream using NAudio. Essentially you have one thread downloading MP3 frames, decompressing them and storing them in a BufferedWaveProvider. Another thread then plays back using the BufferedWaveProvider as an input.

回答2:

The SoundPlayer class can do this. It looks like all you have to do is set its Stream property to the stream, then call Play.

edit
I don\'t think it can play MP3 files though; it seems limited to .wav. I\'m not certain if there\'s anything in the framework that can play an MP3 file directly. Everything I find about that involves either using a WMP control or interacting with DirectX.

回答3:

Bass can do just this. Play from Byte[] in memory or a through file delegates where you return the data, so with that you can play as soon as you have enough data to start the playback..

回答4:

I slightly modified the topic starter source, so it can now play a not-fully-loaded file. Here it is (note, that it is just a sample and is a point to start from; you need to do some exception and error handling here):

private Stream ms = new MemoryStream();
public void PlayMp3FromUrl(string url)
{
    new Thread(delegate(object o)
    {
        var response = WebRequest.Create(url).GetResponse();
        using (var stream = response.GetResponseStream())
        {
            byte[] buffer = new byte[65536]; // 64KB chunks
            int read;
            while ((read = stream.Read(buffer, 0, buffer.Length)) > 0)
            {
                var pos = ms.Position;
                ms.Position = ms.Length;
                ms.Write(buffer, 0, read);
                ms.Position = pos;
            }
        }
    }).Start();

    // Pre-buffering some data to allow NAudio to start playing
    while (ms.Length < 65536*10)
        Thread.Sleep(1000);

    ms.Position = 0;
    using (WaveStream blockAlignedStream = new BlockAlignReductionStream(WaveFormatConversionStream.CreatePcmStream(new Mp3FileReader(ms))))
    {
        using (WaveOut waveOut = new WaveOut(WaveCallbackInfo.FunctionCallback()))
        {
            waveOut.Init(blockAlignedStream);
            waveOut.Play();
            while (waveOut.PlaybackState == PlaybackState.Playing)
            {
                System.Threading.Thread.Sleep(100);
            }
        }
    }
}

回答5:

NAudio wraps the WaveOutXXXX API. I haven\'t looked at the source, but if NAudio exposes the waveOutWrite() function in a way that doesn\'t automatically stop playback on each call, then you should be able to do what you really want, which is to start playing the audio stream before you\'ve received all the data.

Using the waveOutWrite() function allows you to \"read ahead\" and dump smaller chunks of audio into the output queue - Windows will automatically play the chunks seamlessly. Your code would have to take the compressed audio stream and convert it to small chunks of WAV audio on the fly; this part would be really difficult - all the libraries and components I\'ve ever seen do MP3-to-WAV conversion an entire file at a time. Probably your only realistic chance is to do this using WMA instead of MP3, because you can write simple C# wrappers around the multimedia SDK.

回答6:

I\'ve tweaked the source posted in the question to allow usage with Google\'s TTS API in order to answer the question here:

bool waiting = false;
AutoResetEvent stop = new AutoResetEvent(false);
public void PlayMp3FromUrl(string url, int timeout)
{
    using (Stream ms = new MemoryStream())
    {
        using (Stream stream = WebRequest.Create(url)
            .GetResponse().GetResponseStream())
        {
            byte[] buffer = new byte[32768];
            int read;
            while ((read = stream.Read(buffer, 0, buffer.Length)) > 0)
            {
                ms.Write(buffer, 0, read);
            }
        }
        ms.Position = 0;
        using (WaveStream blockAlignedStream =
            new BlockAlignReductionStream(
                WaveFormatConversionStream.CreatePcmStream(
                    new Mp3FileReader(ms))))
        {
            using (WaveOut waveOut = new WaveOut(WaveCallbackInfo.FunctionCallback()))
            {
                waveOut.Init(blockAlignedStream);
                waveOut.PlaybackStopped += (sender, e) =>
                {
                    waveOut.Stop();
                };
                waveOut.Play();
                waiting = true;
                stop.WaitOne(timeout);
                waiting = false;
            }
        }
    }
}

Invoke with:

var playThread = new Thread(timeout => PlayMp3FromUrl(\"http://translate.google.com/translate_tts?q=\" + HttpUtility.UrlEncode(relatedLabel.Text), (int)timeout));
playThread.IsBackground = true;
playThread.Start(10000);

Terminate with:

if (waiting)
    stop.Set();

Notice that I\'m using the ParameterizedThreadDelegate in the code above, and the thread is started with playThread.Start(10000);. The 10000 represents a maximum of 10 seconds of audio to be played so it will need to be tweaked if your stream takes longer than that to play. This is necessary because the current version of NAudio (v1.5.4.0) seems to have a problem determining when the stream is done playing. It may be fixed in a later version or perhaps there is a workaround that I didn\'t take the time to find.

回答7:

I wrapped the MP3 decoder library and made it available for .NET developers as mpg123.net.

Included are the samples to convert MP3 files to PCM, and read ID3 tags.

回答8:

I\'ve always used FMOD for things like this because it\'s free for non-commercial use and works well.

That said, I\'d gladly switch to something that\'s smaller (FMOD is ~300k) and open-source. Super bonus points if it\'s fully managed so that I can compile / merge it with my .exe and not have to take extra care to get portability to other platforms...

(FMOD does portability too but you\'d obviously need different binaries for different platforms)

回答9:

I haven\'t tried it from a WebRequest, but both the Windows Media Player ActiveX and the MediaElement (from WPF) components are capable of playing and buffering MP3 streams.

I use it to play data coming from a SHOUTcast stream and it worked great. However, I\'m not sure if it will work in the scenario you propose.