How do I set chmod for a folder and all of its sub

问题:

Is there a way to set chmod 755 for /opt/lampp/htdocs and all of its content including subfolders and files?

Also, in the future, if I create a new folder or file inside htdocs, how can the permissions of that automatically be set to 755?

This works, but only for this folder:

chmod 775 /opt/lampp/htdocs

回答1:

The other answers are correct, in that chmod -R 755 will set these permissions to all files and subfolders in the tree. But why on earth would you want to? It might make sense for the directories, but why set the execute bit on all the files?

I suspect what you really want to do is set the directories to 755 and either leave the files alone or set them to 644. For this, you can use the find command. For example:

To change all the directories to 755 (drwxr-xr-x):

find /opt/lampp/htdocs -type d -exec chmod 755 {} \\;

To change all the files to 644 (-rw-r--r--):

find /opt/lampp/htdocs -type f -exec chmod 644 {} \\;

回答2:

Check the -R option

chmod -R <permissionsettings> <dirname>

In the future, you can save a lot of time by checking the man page first:

man <command name>

So in this case:

man chmod

回答3:

If you want to set permissions on all files to a+r, and all directories to a+x, and do that recursively through the complete subdirectory tree, use:

chmod -R a+rX *

The X (that is capital X, not small x!) is ignored for files (unless they are executable for someone already) but is used for directories.

回答4:

You can use -R with chmod for recursive traversal of all files and subfolders.

You might need sudo as it depends on LAMP being installed by the current user or another one:

sudo chmod 755 -R /opt/lampp/htdocs

回答5:

To set to all subfolders (recursively) use -R

chmod 755 /folder -R

And use umask to set the default to new folders/files cd /folder umask 755

回答6:

chmod 755 -R /opt/lampp/htdocs will recursively set the permissions. There\'s no way to set the permissions for files automatically in only this directory that are created after you set the permissions, but you could change your system-wide default file permissions with by setting umask 022.

回答7:

The correct recursive command is:

sudo chmod 755 -R /opt/lampp/htdocs

-R: change every sub folder including the current folder

回答8:

You might want to consider this answer given by nik on superuser and use \"one chmod\" for all files/folders like this:

chmod 755 $(find /path/to/base/dir -type d)
chmod 644 $(find /path/to/base/dir -type f)

回答9:

Use:

sudo chmod 755 -R /whatever/your/directory/is

However, be careful with that. It can really hurt you if you change the permissions of the wrong files/folders.

回答10:

Here\'s another way to set directories to 775 and files to 664.

find /opt/lampp/htdocs \\
\\( -type f -exec chmod ug+rw,o+r {} \\; \\) , \\
\\( -type d -exec chmod ug+rwxs,o+rx {} \\; \\)

It may look long, but it\'s pretty cool for three reasons:

1. Scans through the file system only once rather than twice.
2. Provides better control over how files are handled vs. how directories are handled. This is useful when working with special modes such as the sticky bit, which you probably want to apply to directories but not files.
3. Uses a technique straight out of the man pages (see below).

Note that I have not confirmed the performance difference (if any) between this solution and that of simply using two find commands (as in Peter Mortensen\'s solution). However, seeing a similar example in the manual is encouraging.

Example from man find page:

find / \\
\\( -perm -4000 -fprintf /root/suid.txt %#m %u %p\\n \\) , \\
\\( -size +100M -fprintf /root/big.txt %-10s %p\\n \\)

Traverse the filesystem just once, listing setuid files and  direc‐
tories into /root/suid.txt and large files into /root/big.txt.

Cheers

回答11:

chmod -R 755 directory_name works, but how would you keep new files to 755 also? The file\'s permissions becomes the default permission.

回答12:

You want to make sure that appropriate files and directories are chmod-ed/permissions for those are appropriate. For all directories you want

find /opt/lampp/htdocs -type d -exec chmod 711 {} \\;

And for all the images, JavaScript, CSS, HTML...well, you shouldn\'t execute them. So use

chmod 644 img/* js/* html/*

But for all the logic code (for instance PHP code), you should set permissions such that the user can\'t see that code:

chmod 600 file

回答13:

For Mac OS X 10.7 (Lion), it is:

chmod -R 755 /directory

And yes, as all other say, be careful when doing this.

回答14:

I think Adam was asking how to change umask value for all processes that tying to operate on /opt/lampp/htdocs directory.

The user file-creation mode mask (umask) is use to determine the file permission for newly created files. It can be used to control the default file permission for new files.

so if you will use some kind of ftp program to upload files into /opt/lampp/htdocs you need to configure your ftp server to use umask you want.

If files / directories be created for example by php, you need to modify php code

<?php
umask(0022);
// other code
?>

if you will create new files / folders from your bash session, you can set umask value in your shell profile ~/.bashrc Or you can set up umask in /etc/bashrc or /etc/profile file for all users. add the following to file: umask 022

Sample umask Values and File Creation Permissions
If umask value set to   User permission     Group permission     Others permission
000                         all              all                   all
007                         all              all                   none
027                         all          read / execute            none

And to change permissions for already created files you can use find. Hope this helps.

回答15:

There are two answers of finding files and applying chmod to them. First one is find the file and apply chmod as it finds (as suggested by @WombleGoneBad).

find /opt/lampp/htdocs -type d -exec chmod 755 {} \\;

Second solution is to generate list of all files with find command and supply this list to the chmod command (as suggested by @lamgesh).

chmod 755 $(find /path/to/base/dir -type d)

Both of these versions work nice as long as the number of files returned by the find command is small. The second solution looks great to eye and more readable than the first one. If there are large number of files, the second solution returns error : Argument list too long.

So my suggestion is

1. Use chmod -R 755 /opt/lampp/htdocs if you want to change permissions of all files and directories at once.
2. Use find /opt/lampp/htdocs -type d -exec chmod 755 {} \\; if the number of files you are using is very large. The -type x option searches for specific type of file only, where d is used for finding directory, f for file and l for link.
3. Use chmod 755 $(find /path/to/base/dir -type d) otherwise
4. Better to use the first one in any situation

回答16:

It\'s very simple.

In Terminal go to file manager. example: sudo nemo. Go /opt/ then click Properties → Permission. and then Other. Finally, change to create and delete and file acess to read and write and click on button apply... And work.