Redirect STDERR / STDOUT of a process AFTER it'

问题:

In the shell you can do redirection, > <, etc., but how about AFTER a program is started?

Here's how I came to ask this question, a program running in the background of my terminal keeps outputting annoying text. It's an important process so I have to open another shell to avoid the text. I'd like to be able to >/dev/null or some other redirection so I can keep working in the same shell.

回答1:

Short of closing and reopening your tty (i.e. logging off and back on, which may also terminate some of your background processes in the process) you only have one choice left:

• attach to the process in question using gdb, and run:
  • p dup2(open("/dev/null", 0), 1)
  • p dup2(open("/dev/null", 0), 2)
  • detach
  • quit

e.g.:

$ tail -f /var/log/lastlog &
[1] 5636

$ ls -l /proc/5636/fd
total 0
lrwx------ 1 myuser myuser 64 Feb 27 07:36 0 -> /dev/pts/0
lrwx------ 1 myuser myuser 64 Feb 27 07:36 1 -> /dev/pts/0
lrwx------ 1 myuser myuser 64 Feb 27 07:36 2 -> /dev/pts/0
lr-x------ 1 myuser myuser 64 Feb 27 07:36 3 -> /var/log/lastlog

$ gdb -p 5636
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Attaching to process 5636
Reading symbols from /usr/bin/tail...(no debugging symbols found)...done.
Reading symbols from /lib/librt.so.1...(no debugging symbols found)...done.
Loaded symbols for /lib/librt.so.1
Reading symbols from /lib/libc.so.6...(no debugging symbols found)...done.
Loaded symbols for /lib/libc.so.6
Reading symbols from /lib/libpthread.so.0...(no debugging symbols found)...done.
[Thread debugging using libthread_db enabled]
[New Thread 0x7f3c8f5a66e0 (LWP 5636)]
Loaded symbols for /lib/libpthread.so.0
Reading symbols from /lib/ld-linux-x86-64.so.2...(no debugging symbols found)...done.
Loaded symbols for /lib64/ld-linux-x86-64.so.2

(no debugging symbols found)
0x00007f3c8eec7b50 in nanosleep () from /lib/libc.so.6

(gdb) p dup2(open("/dev/null",0),1)
[Switching to Thread 0x7f3c8f5a66e0 (LWP 5636)]
$1 = 1

(gdb) p dup2(open("/dev/null",0),2)
$2 = 2

(gdb) detach
Detaching from program: /usr/bin/tail, process 5636

(gdb) quit

$ ls -l /proc/5636/fd
total 0
lrwx------ 1 myuser myuser 64 Feb 27 07:36 0 -> /dev/pts/0
lrwx------ 1 myuser myuser 64 Feb 27 07:36 1 -> /dev/null
lrwx------ 1 myuser myuser 64 Feb 27 07:36 2 -> /dev/null
lr-x------ 1 myuser myuser 64 Feb 27 07:36 3 -> /var/log/lastlog
lr-x------ 1 myuser myuser 64 Feb 27 07:36 4 -> /dev/null
lr-x------ 1 myuser myuser 64 Feb 27 07:36 5 -> /dev/null

You may also consider:

• using screen; screen provides several virtual TTYs you can switch between without having to open new SSH/telnet/etc, sessions
• using nohup; this allows you to close and reopen your session without losing any background processes in the... process.

回答2:

This will do:

strace -ewrite -p $PID

It's not that clean (shows lines like: write(#,<text you want to see>) ), but works!

---

You might also dislike the fact that arguments are abbreviated. To control that use the -s parameter that sets the maximum length of strings displayed.

It catches all streams, so you might want to filter that somehow:

strace -ewrite -p $PID 2>&1 | grep "write(1" 

shows only descriptor 1 calls. 2>&1 is to redirect STDERR to STDOUT, as strace writes to STDERR by default.

回答3:

riffing off vladr's (and others') excellent research:

create the following two files in the same directory, something in your path, say $HOME/bin:

silence.gdb, containing (from vladr's answer):

p dup2(open("/dev/null",0),1)
p dup2(open("/dev/null",0),2)
detach
quit

and silence, containing:

#!/bin/sh
if [ "$0" -a "$1" ]; then
 gdb -p $1 -x $0.gdb
else
 echo Must specify PID of process to silence >&2
fi

chmod +x ~/bin/silence  # make the script executable

Now, next time you forget to redirect firefox, for example, and your terminal starts getting cluttered with the inevitable "(firefox-bin:5117): Gdk-WARNING **: XID collision, trouble ahead" messages:

ps  # look for process xulrunner-stub (in this case we saw the PID in the error above)
silence 5117  # run the script, using PID we found

You could also redirect gdb's output to /dev/null if you don't want to see it.

回答4:

Redirect output from a running process to another terminal, file or screen:

tty
ls -l /proc/20818/fd
gdb -p 20818

Inside gdb:

p close(1)
p open("/dev/pts/4", 1)
p close(2)
p open("/tmp/myerrlog", 1)
q

Detach a running process from bash terminal and keep it alive:

[Ctrl+z]
bg %1 && disown %1
[Ctrl+d]

Explanation:

20818 - just an example of running process pid
p - print result of gdb command
close(1) - close standard output
/dev/pts/4 - terminal to write to
close(2) - close error output
/tmp/myerrlog - file to write to
q - quit gdb
bg %1 - run stoped job 1 on background
disown %1 - detach job 1 from terminal

回答5:

Not a direct answer to your question, but it's a technique I've been finding useful over the last few days: Run the initial command using 'screen', and then detach.

回答6:

this is bash script part based on previous answers, which redirect log file during execution of an open process, it is used as postscript in logrotate process

#!/bin/bash

pid=$(cat /var/run/app/app.pid)
logFile="/var/log/app.log"

reloadLog()
{
    if [ "$pid" = "" ]; then
        echo "invalid PID"
    else
        gdb -p $pid >/dev/null 2>&1 <<LOADLOG
p close(1)
p open("$logFile", 1)
p close(2)
p open("$logFile", 1)
q
LOADLOG
        LOG_FILE=$(ls /proc/${pid}/fd -l | fgrep " 1 -> " | awk '{print $11}')
        echo "log file set to $LOG_FILE"
    fi
}

reloadLog

回答7:

Dupx is a simple *nix utility to redirect standard output/input/error of an already running process.

https://www.isi.edu/~yuri/dupx/