Azure Website Remote Debugging with git deploy not

I've been trying out the new Remote Debugging feature for Azure Websites, but I think I may have come across an issue: I can only get it to work properly if I use Web Publish. If I deploy a site with local git deploy, the debugger attaches but the debug symbols aren't loaded (breakpoints show the warning).

I tried both setting the Release configuration to include PDB files (since Azure's git deploy uses the Release configuration by default) and by using a custom deploy script generated by the azure site deploymentscript command detailed here and setting the build command to use the Debug configuration. In both cases, I still get the same issue that the symbols aren't loaded.

I feel like the problem is probably one of the following:

Azure runs some sort of custom action after a Web Publish that must be run in order to allow remote debugging
The build options used by the git deployment scripts are missing some sort of flag that's causing PDB output to not be present for the web application (I don't think this one is likely)
Azure is not honoring the Configuration I use in the deployment script when the site is actually running and compiled on-demand

Ultimately I'm hoping to write some automated deployment scripts and I'd much rather use git deployment than Web Publish to accomplish this. What really baffles me is that this fails even with the Release configuration set to include the PDB files. It really makes me think there must be something extra being done on Azure for Web Publish that's not done for git deployment. Does anyone have any ideas of what may be causing the difference here?

Custom Git Deployment Script

I'm including the custom deployment script generated by azure site deploymentscript for reference and to show the build flags it uses. The relevant parts are after the :: Deployment section.

@if "%SCM_TRACE_LEVEL%" NEQ "4" @echo off

:: ----------------------
:: KUDU Deployment Script
:: Version: 0.1.5
:: ----------------------

:: Prerequisites
:: -------------

:: Verify node.js installed
where node 2>nul >nul
IF %ERRORLEVEL% NEQ 0 (
  echo Missing node.js executable, please install node.js, if already installed make sure it can be reached from current environment.
  goto error
)

:: Setup
:: -----

setlocal enabledelayedexpansion

SET ARTIFACTS=%~dp0%..\artifacts

IF NOT DEFINED DEPLOYMENT_SOURCE (
  SET DEPLOYMENT_SOURCE=%~dp0%.
)

IF NOT DEFINED DEPLOYMENT_TARGET (
  SET DEPLOYMENT_TARGET=%ARTIFACTS%\wwwroot
)

IF NOT DEFINED NEXT_MANIFEST_PATH (
  SET NEXT_MANIFEST_PATH=%ARTIFACTS%\manifest

  IF NOT DEFINED PREVIOUS_MANIFEST_PATH (
    SET PREVIOUS_MANIFEST_PATH=%ARTIFACTS%\manifest
  )
)

IF NOT DEFINED KUDU_SYNC_CMD (
  :: Install kudu sync
  echo Installing Kudu Sync
  call npm install kudusync -g --silent
  IF !ERRORLEVEL! NEQ 0 goto error

  :: Locally just running "kuduSync" would also work
  SET KUDU_SYNC_CMD=node "%appdata%\npm\node_modules\kuduSync\bin\kuduSync"
)
IF NOT DEFINED DEPLOYMENT_TEMP (
  SET DEPLOYMENT_TEMP=%temp%\___deployTemp%random%
  SET CLEAN_LOCAL_DEPLOYMENT_TEMP=true
)

IF DEFINED CLEAN_LOCAL_DEPLOYMENT_TEMP (
  IF EXIST "%DEPLOYMENT_TEMP%" rd /s /q "%DEPLOYMENT_TEMP%"
  mkdir "%DEPLOYMENT_TEMP%"
)

IF NOT DEFINED MSBUILD_PATH (
  SET MSBUILD_PATH=%WINDIR%\Microsoft.NET\Framework\v4.0.30319\msbuild.exe
)

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: Deployment
:: ----------

echo Handling .NET Web Application deployment.

:: 1. Restore NuGet packages
IF /I "azure-test.sln" NEQ "" (
  call "%NUGET_EXE%" restore "%DEPLOYMENT_SOURCE%\azure-test.sln"
  IF !ERRORLEVEL! NEQ 0 goto error
)

:: 2. Build to the temporary path
IF /I "%IN_PLACE_DEPLOYMENT%" NEQ "1" (
  %MSBUILD_PATH% "%DEPLOYMENT_SOURCE%\azure-test\azure-test.csproj" /nologo /verbosity:m /t:Build /t:pipelinePreDeployCopyAllFilesToOneFolder     /p:_PackageTempDir="%DEPLOYMENT_TEMP%";AutoParameterizationWebConfigConnectionStrings=false;Configuration=Debug /p:SolutionDir="%DEPLOYMENT_SOURCE%\.\\"     %SCM_BUILD_ARGS%
) ELSE (
  %MSBUILD_PATH% "%DEPLOYMENT_SOURCE%\azure-test\azure-test.csproj" /nologo /verbosity:m /t:Build     /p:AutoParameterizationWebConfigConnectionStrings=false;Configuration=Debug /p:SolutionDir="%DEPLOYMENT_SOURCE%\.\\" %SCM_BUILD_ARGS%
)

IF !ERRORLEVEL! NEQ 0 goto error

:: 3. KuduSync
IF /I "%IN_PLACE_DEPLOYMENT%" NEQ "1" (
  call %KUDU_SYNC_CMD% -v 50 -f "%DEPLOYMENT_TEMP%" -t "%DEPLOYMENT_TARGET%" -n "%NEXT_MANIFEST_PATH%" -p "%PREVIOUS_MANIFEST_PATH%" -i ".git;.hg;.deployment;deploy.cmd"
  IF !ERRORLEVEL! NEQ 0 goto error
)

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:: Post deployment stub
call %POST_DEPLOYMENT_ACTION%
IF !ERRORLEVEL! NEQ 0 goto error

goto end

:error
echo An error has occurred during web site deployment.
call :exitSetErrorLevel
call :exitFromFunction 2>nul

:exitSetErrorLevel
exit /b 1

:exitFromFunction
()

:end
echo Finished successfully.

回答1:

Update 2/8/2014

Some fixes were made in WAWS, and it is now possible to make debugging work when using git, by having VS correctly load the server-side PDBs. For it to work, you need to do one of two things (i.e. you don't need to do both). It can work in both VS 2012 and 2013.

Turn off Just My Code debugging: just turn off that setting in the VS debugger settings and try debugging your Azure Web Site.
Build in Debug mode: to do that on the server build, you can go to the Azure Portal and add an ApSetting called SCM_BUILD_ARGS, with value -p:Configuration=Debug (more details here). Then go to the Deployments page and hit the Redeploy button (for the current deployment). Then attach from VS and it should all work!

Original answer

Indeed, this doesn't work today, and we're trying to see how we could make it work. At the root, the problem appears to be the Visual Studio debugger expects to find the PDBs on the client, while in the git case they only exist on the server.

This article discusses changes to how the debugger works between 2010 and the newer versions, and that probably affects things.

More investigation needed, but this is the state of things right now.

回答2:

I was having this problem with a .Net Core Azure Function project, using the Cloud Explorer right-click functionality to attach. The following github issue speaks to it, but solution didn't solve my problem:

https://github.com/Azure/Azure-Functions/issues/872

I finally stumbled across the answer here:

http://dontcodetired.com/blog/post/Remote-Debugging-Azure-Functions-V2-The-breakpoint-will-not-currently-be-hit-No-symbols-have-been-loaded-for-this-document

It boils down to manually attaching to the process in Azure, rather than relying on the Cloud Explorer right-click functionality.