I am trying to configure an MVC 5 application to use SignalR 2.2.x and inject a service into my NotificationsHub
.
We are using Autofac for MVC but I am not sure on how to correctly configure this.
Autofac documentation exists for NuGet Autofac.Integration.SignalR (3.0.2)
and Autofac.Integration.Mvc (3.3.4)
.
What I am doing so far is register the hubs via:
ContainerBuilder builder = new ContainerBuilder();
// Register MVC controllers.
builder.RegisterControllers(typeof(MvcApplication).Assembly);
builder.RegisterType<ServiceForSignalRHub>().AsImplementedInterfaces();
builder.RegisterType<...>().AsImplementedInterfaces();
builder.RegisterHubs(Assembly.GetExecutingAssembly());
IContainer container = builder.Build();
DependencyResolver.SetResolver(new AutofacDependencyResolver(container));
However the call to .SetResolver(...)
is ambigious as it exists in both MVC and SignalR integration packages. Now what? I am unable to confirm if the contructor injection of my service works for the Hub I am using.
EDIT
I can configure MVC5 with Autofac just fine. Where I get lost is how to do the same with SignalR, using the Autofac Signal integration NuGet.
Please see below.
This is my startup class:
public partial class Startup
{
public void Configuration(IAppBuilder app)
{
var defaultFactory = LogManager.Use<DefaultFactory>();
defaultFactory.Directory("@D:\\NServiceBus\\ );
defaultFactory.Level(LogLevel.Debug);
var container = ConfigureAutofac(app);
ConfigureServiceBus(container, app);
app.UseAutofacMiddleware(container); // REGISTER WITH OWIN
app.UseAutofacMvc();
ConfigureAuth(app);
GlobalConfiguration.Configuration.UseSqlServerStorage("hangfire");
ConfigureSignalR(app);
}
}
This is the part where I configure SignalR:
public partial class Startup
{
public void ConfigureSignalR(IAppBuilder app)
{
var builder = new ContainerBuilder();
builder.RegisterHubs(Assembly.GetExecutingAssembly()).PropertiesAutowired();
builder.RegisterType<MaintenanceService>().As<IMaintenanceService>().PropertiesAutowired();
var container = builder.Build();
//var container = new AutofacContainer().Container;
var resolver = new AutofacDependencyResolver(container);
// Any connection or hub wire up and configuration should go here
app.MapSignalR(new HubConfiguration
{
Resolver = resolver,
EnableJSONP = true,
EnableDetailedErrors = true,
EnableJavaScriptProxies = true
});
builder.RegisterInstance(resolver.Resolve<IConnectionManager>());
}
}
How can this be correctly done?
You should tell SignalR explicitly to use the AutofacDependencyResolver
when you are mapping it.
I assume that you know that in your Startup
class you have to call app.MapSignalR();
When you are mapping it, you should tell it to use the custom dependency resolver (the AutofacDependencyResolver
).
Here's how I do it:
var resolver = new AutofacDependencyResolver(container);
app.MapSignalR(new HubConfiguration
{
Resolver = resolver
});
This way, you are telling SignalR directly which dependency resolver to use.
I have a GitHub repo for SignalR Dependency Injection, but it's not configured to use MVC. Still, I think it will give you a hint in how to create your configuration.
Note: If you are using the OWIN Middleware, be sure not to use the GlobalHost
static property AT ALL since it will have massive inconsistencies.
A common error in OWIN integration is use of the GlobalHost. In OWIN
you create the configuration from scratch. You should not reference
GlobalHost anywhere when using the OWIN integration.
Again, check the repo I gave you to see how to do this.
Hope this helps:)
Best of luck!
I ended up with this (pay attention to comments):
public partial class Startup
{
public void Configuration(IAppBuilder app)
{
ConfigureAuth(app);
IContainer container = AutofacConfig(app);
app.UseAutofacMiddleware(container);
app.UseAutofacMvc();
DependencyResolver.SetResolver(new Autofac.Integration.Mvc.AutofacDependencyResolver(container));
GlobalConfiguration.Configuration.DependencyResolver = new AutofacWebApiDependencyResolver(container);
app.UseAutofacWebApi(GlobalConfiguration.Configuration);
var hubConfiguration = new Microsoft.AspNet.SignalR.HubConfiguration()
{
// Resolve presolver from container
Resolver = container.Resolve<Microsoft.AspNet.SignalR.IDependencyResolver>(),
};
app.MapSignalR(hubConfiguration);
AreaRegistration.RegisterAllAreas();
GlobalConfiguration.Configure(WebApiConfig.Register);
FilterConfig.RegisterGlobalFilters(GlobalFilters.Filters);
RouteConfig.RegisterRoutes(RouteTable.Routes);
BundleConfig.RegisterBundles(BundleTable.Bundles);
}
}
_
private static IContainer AutofacConfig(IAppBuilder app)
{
var builder = new ContainerBuilder();
RegisterSignalR(builder);
return builder.Build();
}
_
private static void RegisterSignalR(ContainerBuilder builder)
{
// Register Autofac resolver into container to be set into HubConfiguration later
builder.RegisterType<Autofac.Integration.SignalR.AutofacDependencyResolver>()
.As<Microsoft.AspNet.SignalR.IDependencyResolver>()
.SingleInstance();
// Register ConnectionManager as IConnectionManager so that you can get
// hub context via IConnectionManager injected to your service
builder.RegisterType<Microsoft.AspNet.SignalR.Infrastructure.ConnectionManager>()
.As<Microsoft.AspNet.SignalR.Infrastructure.IConnectionManager>()
.SingleInstance();
// Register hubs one by one
builder.RegisterType<MessageNotificationsHub>().ExternallyOwned();
builder.RegisterType<SystemNotificationsHub>().ExternallyOwned();
}
Thanks to @Nathan and his answer (originally found here) and logical thinking to figure out to register ConnectionManager as IConnectionManager
Install nuget package Autofac.SignalR, for example:
<package id="Autofac.SignalR" version="3.0.2" targetFramework="net471" />
Register your hubs
// during creation of the IContainer, register signalr hubs automatically
var executingAssembly = Assembly.GetExecutingAssembly();
builder.RegisterHubs(executingAssembly);
// alternatively register hubs individually
// ExternallyOwned() ensures SignalR is allowed to control disposal of the hubs rather than Autofac.
builder.RegisterType<NotificationHub>().ExternallyOwned();
Set signalr service locator
// replace the Signalr dependency resolver once your IContainer 'container' is ready
GlobalHost.DependencyResolver = new AutofacDependencyResolver(container);
// or this can alternatively be set in the HubConfiguration instance when using OWIN IAppBuilder map.RunSignalR(hubConfiguration);
var hubConfiguration = new HubConfiguration
{
Resolver = new AutofacDependencyResolver(container),
//...
}
For more information:
https://autofaccn.readthedocs.io/en/latest/integration/signalr.html
https://docs.microsoft.com/en-us/aspnet/signalr/overview/advanced/dependency-injection