git push failing in gitlab

问题:

1. I have installed Gitlab in /home/myuser/gitlab.
   1. I created a rep test
   2. Following instructions, I added a remote git@localhost:root/testing.git

I found that there was a problem with my ssh connect. Here's my /home/myhome/.ssh/config file

Host mylocalhost
Hostname localhost
User git
IdentityFile /home/myuser/.ssh/id_rsa

When I run git push -u origin master I am asked to enter my passphrase. But, immediately after I get this message

Connection closed by ::1

fatal: Could not read from remote repository.

Please make sure you have the correct access rights and the repository exists.

Where am I going wrong ? Is this my ssh connection

Update : I stopped sshd and the ran sshd -d (in my /home/myhome) and then ssh -T mylocalhost, I got in the ssh -d output

debug1: sshd version OpenSSH_6.2, OSSLShim 0.9.8r 8 Dec 2011
debug1: read PEM private key done: type RSA
debug1: private host key: #0 type 1 RSA
debug1: read PEM private key done: type DSA
debug1: private host key: #1 type 2 DSA
debug1: rexec_argv[0]='/usr/sbin/sshd'
debug1: rexec_argv[1]='-d'
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
debug1: Bind to port 22 on ::.
Server listening on :: port 22.
debug1: fd 6 clearing O_NONBLOCK
debug1: Server will not fork when running in debugging mode.
debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9
debug1: inetd sockets after dupping: 5, 5
Connection from ::1 port 51579
debug1: Client protocol version 2.0; client software version OpenSSH_6.2
debug1: match: OpenSSH_6.2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
debug1: permanently_set_uid: 75/75 [preauth]
debug1: list_hostkey_types: ssh-rsa,ssh-dss [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug1: kex: client->server aes128-ctr [e-mail] none [preauth]
debug1: kex: server->client aes128-ctr [e-mail] none [preauth]
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received [preauth]
debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent [preauth]
debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT [preauth]
debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user git service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug1: PAM: initializing for "git"
debug1: PAM: setting PAM_RHOST to "localhost"
debug1: userauth-request for user git service ssh-connection method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug1: test whether pkalg/pkblob are acceptable [preauth]
debug1: temporarily_use_uid: 1111/20 (e=0/0)
debug1: trying public key file /Users/git/.ssh/authorized_keys
debug1: fd 6 clearing O_NONBLOCK
debug1: matching key found: file /Users/git/.ssh/authorized_keys, line 1
Found matching RSA key: e9:70:a8:96:1c:a5:b4:b0:58:b0:b8:22:6f:9b:98:bb
debug1: restore_uid: 0/0
Postponed publickey for git from ::1 port 51579 ssh2 [preauth]
debug1: userauth-request for user git service ssh-connection method publickey [preauth]
debug1: attempt 2 failures 0 [preauth]
debug1: temporarily_use_uid: 1111/20 (e=0/0)
debug1: trying public key file /Users/git/.ssh/authorized_keys
debug1: fd 6 clearing O_NONBLOCK
debug1: matching key found: file /Users/git/.ssh/authorized_keys, line 1
Found matching RSA key: e9:70:a8:96:1c:a5:b4:b0:58:b0:b8:22:6f:9b:98:bb
debug1: restore_uid: 0/0
debug1: ssh_rsa_verify: signature correct
debug1: do_pam_account: called
Failed publickey for git from ::1 port 51579 ssh2
debug1: audit_event: unhandled event 6
Access denied for user git by PAM account configuration [preauth]
debug1: do_cleanup [preauth]
debug1: monitor_read_log: child log fd closed
debug1: do_cleanup
debug1: PAM: cleanup
debug1: Killing privsep child 17748
debug1: audit_event: unhandled event 12

Btw, each time I run some git command, I get the message

ssh: Could not resolve hostname mylocalhost: nodename nor servname provided, or not known
fatal: Could not read from remote repository.

Update 2

When I run ssh mylocalhost, I have the good message Welcome to GitLab, Administrator!. But then, I get the following input

debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: client_input_channel_req: channel 0 rtype [e-mail] reply 0
debug2: channel 0: rcvd eow
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug2: channel 0: rcvd close
debug3: channel 0: will not send data after close
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
  #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1)

Transferred: sent 3284, received 3480 bytes, in 0.4 seconds
Bytes per second: sent 7501.3, received 7949.0
debug1: Exit status 0` 

and in my GitLab log

Started GET "/api/v3/internal/allowed?key_id=4&action=git-receive-pack&ref=_any&project=testing" for 127.0.0.1 at 2013-11-07 16:48:00 +0100

回答1:

If you are using the SCP-like syntax for the ssh url, then, considering your ~/.ssh/config, that url should be:

git remote set-url origin mylocalhost:root/testing.git

That supposes that you have added your public key (the ~/.ssh/id_rsa.pub) in your GitLab account page:

And that the access protection is correct

• on the local side

• as well as on the server side

  chmod 700 /home/git/.ssh
  chmod 600 /home/git/.ssh/authorized_keys
  

The OP Newben reports (in the comments):

I had to go to my osx shared preferences panel and set manually the users remote access perms.