Sequence to Sequence - for time series prediction

问题:

I've tried to build a sequence to sequence model to predict a sensor signal over time based on its first few inputs (see figure below)

The model works OK, but I want to 'spice things up' and try to add an attention layer between the two LSTM layers.

Model code:

def train_model(x_train, y_train, n_units=32, n_steps=20, epochs=200,
                n_steps_out=1):

    filters = 250
    kernel_size = 3

    logdir = os.path.join(logs_base_dir, datetime.datetime.now().strftime("%Y%m%d-%H%M%S"))
    tensorboard_callback = TensorBoard(log_dir=logdir, update_freq=1)

    # get number of features from input data
    n_features = x_train.shape[2]
    # setup network
    # (feel free to use other combination of layers and parameters here)
    model = keras.models.Sequential()
    model.add(keras.layers.LSTM(n_units, activation='relu',
                                return_sequences=True,
                                input_shape=(n_steps, n_features)))
    model.add(keras.layers.LSTM(n_units, activation='relu'))
    model.add(keras.layers.Dense(64, activation='relu'))
    model.add(keras.layers.Dropout(0.5))
    model.add(keras.layers.Dense(n_steps_out))
    model.compile(optimizer='adam', loss='mse', metrics=['mse'])
    # train network
    history = model.fit(x_train, y_train, epochs=epochs,
                        validation_split=0.1, verbose=1, callbacks=[tensorboard_callback])
    return model, history

I've looked at the documentation but I'm a bit lost. Any help adding the attention layer or comments on the current model would be appreciated

---

Update: After Googeling around, I'm starting to think I got it all wrong and I rewrote my code.

I'm trying to migrate a seq2seq model that I've found in this GitHub repository. In the repository code the problem demonstrated is predicting a randomly generated sine wave baed on some early samples.

I have a similar problem, and I'm trying to change the code to fit my needs.

Differences:

• My training data shape is (439, 5, 20) 439 different signals, 5 time steps each with 20 features
• I'm not using fit_generator when fitting my data

---

Hyper Params:

layers = [35, 35] # Number of hidden neuros in each layer of the encoder and decoder

learning_rate = 0.01
decay = 0 # Learning rate decay
optimiser = keras.optimizers.Adam(lr=learning_rate, decay=decay) # Other possible optimiser "sgd" (Stochastic Gradient Descent)

num_input_features = train_x.shape[2] # The dimensionality of the input at each time step. In this case a 1D signal.
num_output_features = 1 # The dimensionality of the output at each time step. In this case a 1D signal.
# There is no reason for the input sequence to be of same dimension as the ouput sequence.
# For instance, using 3 input signals: consumer confidence, inflation and house prices to predict the future house prices.

loss = "mse" # Other loss functions are possible, see Keras documentation.

# Regularisation isn't really needed for this application
lambda_regulariser = 0.000001 # Will not be used if regulariser is None
regulariser = None # Possible regulariser: keras.regularizers.l2(lambda_regulariser)

batch_size = 128
steps_per_epoch = 200 # batch_size * steps_per_epoch = total number of training examples
epochs = 100

input_sequence_length = n_steps # Length of the sequence used by the encoder
target_sequence_length = 31 - n_steps # Length of the sequence predicted by the decoder
num_steps_to_predict = 20 # Length to use when testing the model

---

Encoder code:

# Define an input sequence.

encoder_inputs = keras.layers.Input(shape=(None, num_input_features), name='encoder_input')

# Create a list of RNN Cells, these are then concatenated into a single layer
# with the RNN layer.
encoder_cells = []
for hidden_neurons in layers:
    encoder_cells.append(keras.layers.GRUCell(hidden_neurons,
                                              kernel_regularizer=regulariser,
                                              recurrent_regularizer=regulariser,
                                              bias_regularizer=regulariser))

encoder = keras.layers.RNN(encoder_cells, return_state=True, name='encoder_layer')

encoder_outputs_and_states = encoder(encoder_inputs)

# Discard encoder outputs and only keep the states.
# The outputs are of no interest to us, the encoder's
# job is to create a state describing the input sequence.
encoder_states = encoder_outputs_and_states[1:]

---

Decoder code:

# The decoder input will be set to zero (see random_sine function of the utils module).
# Do not worry about the input size being 1, I will explain that in the next cell.
decoder_inputs = keras.layers.Input(shape=(None, 20), name='decoder_input')

decoder_cells = []
for hidden_neurons in layers:
    decoder_cells.append(keras.layers.GRUCell(hidden_neurons,
                                              kernel_regularizer=regulariser,
                                              recurrent_regularizer=regulariser,
                                              bias_regularizer=regulariser))

decoder = keras.layers.RNN(decoder_cells, return_sequences=True, return_state=True, name='decoder_layer')

# Set the initial state of the decoder to be the ouput state of the encoder.
# This is the fundamental part of the encoder-decoder.
decoder_outputs_and_states = decoder(decoder_inputs, initial_state=encoder_states)

# Only select the output of the decoder (not the states)
decoder_outputs = decoder_outputs_and_states[0]

# Apply a dense layer with linear activation to set output to correct dimension
# and scale (tanh is default activation for GRU in Keras, our output sine function can be larger then 1)
decoder_dense = keras.layers.Dense(num_output_features,
                                   activation='linear',
                                   kernel_regularizer=regulariser,
                                   bias_regularizer=regulariser)

decoder_outputs = decoder_dense(decoder_outputs)

---

Model Summary:

model = keras.models.Model(inputs=[encoder_inputs, decoder_inputs], 
outputs=decoder_outputs)
model.compile(optimizer=optimiser, loss=loss)
model.summary()

---

Layer (type)                    Output Shape         Param #     Connected to                     
==================================================================================================
encoder_input (InputLayer)      (None, None, 20)     0                                            
__________________________________________________________________________________________________
decoder_input (InputLayer)      (None, None, 20)     0                                            
__________________________________________________________________________________________________
encoder_layer (RNN)             [(None, 35), (None,  13335       encoder_input[0][0]              
__________________________________________________________________________________________________
decoder_layer (RNN)             [(None, None, 35), ( 13335       decoder_input[0][0]              
                                                                 encoder_layer[0][1]              
                                                                 encoder_layer[0][2]              
__________________________________________________________________________________________________
dense_5 (Dense)                 (None, None, 1)      36          decoder_layer[0][0]              
==================================================================================================
Total params: 26,706
Trainable params: 26,706
Non-trainable params: 0
__________________________________________________________________________________________________

When trying to fit the model:

history = model.fit([train_x, decoder_inputs],train_y, epochs=epochs,
                        validation_split=0.3, verbose=1)

I get the following error:

When feeding symbolic tensors to a model, we expect the tensors to have a static batch size. Got tensor with shape: (None, None, 20)

What am I doing wrong?

回答1:

THIS IS THE ANSWER TO THE EDITED QUESTION

first of all, when you call fit, decoder_inputs is a tensor and you can't use it to fit your model. the author of the code you cited, use an array of zeros and so you have to do the same (I do it in the dummy example below)

secondly, look at your output layer in the model summary... it is 3D so you have to manage your target as 3D array

thirdly, the decoder input must be 1 feature dimension and not 20 as you reported

set initial parameters

layers = [35, 35]
learning_rate = 0.01
decay = 0 
optimiser = keras.optimizers.Adam(lr=learning_rate, decay=decay)

num_input_features = 20
num_output_features = 1
loss = "mse"

lambda_regulariser = 0.000001
regulariser = None

batch_size = 128
steps_per_epoch = 200
epochs = 100

define encoder

encoder_inputs = keras.layers.Input(shape=(None, num_input_features), name='encoder_input')

encoder_cells = []
for hidden_neurons in layers:
    encoder_cells.append(keras.layers.GRUCell(hidden_neurons,
                                              kernel_regularizer=regulariser,
                                              recurrent_regularizer=regulariser,
                                              bias_regularizer=regulariser))

encoder = keras.layers.RNN(encoder_cells, return_state=True, name='encoder_layer')
encoder_outputs_and_states = encoder(encoder_inputs)
encoder_states = encoder_outputs_and_states[1:] # only keep the states

define decoder (1 feature dimension input!)

decoder_inputs = keras.layers.Input(shape=(None, 1), name='decoder_input') #### <=== must be 1

decoder_cells = []
for hidden_neurons in layers:
    decoder_cells.append(keras.layers.GRUCell(hidden_neurons,
                                              kernel_regularizer=regulariser,
                                              recurrent_regularizer=regulariser,
                                              bias_regularizer=regulariser))

decoder = keras.layers.RNN(decoder_cells, return_sequences=True, return_state=True, name='decoder_layer')
decoder_outputs_and_states = decoder(decoder_inputs, initial_state=encoder_states)

decoder_outputs = decoder_outputs_and_states[0] # only keep the output sequence
decoder_dense = keras.layers.Dense(num_output_features,
                                   activation='linear',
                                   kernel_regularizer=regulariser,
                                   bias_regularizer=regulariser)

decoder_outputs = decoder_dense(decoder_outputs)

define model

model = keras.models.Model(inputs=[encoder_inputs, decoder_inputs], outputs=decoder_outputs)
model.compile(optimizer=optimiser, loss=loss)
model.summary()

Layer (type)                    Output Shape         Param #     Connected to                     
==================================================================================================
encoder_input (InputLayer)      (None, None, 20)     0                                            
__________________________________________________________________________________________________
decoder_input (InputLayer)      (None, None, 1)      0                                            
__________________________________________________________________________________________________
encoder_layer (RNN)             [(None, 35), (None,  13335       encoder_input[0][0]              
__________________________________________________________________________________________________
decoder_layer (RNN)             [(None, None, 35), ( 11340       decoder_input[0][0]              
                                                                 encoder_layer[0][1]              
                                                                 encoder_layer[0][2]              
__________________________________________________________________________________________________
dense_4 (Dense)                 (None, None, 1)      36          decoder_layer[0][0]              
==================================================================================================

this is my dummy data. the same as yours in shapes. pay attention to decoder_zero_inputs it has the same dimension of your y but is an array of zeros

train_x = np.random.uniform(0,1, (439, 5, 20))
train_y = np.random.uniform(0,1, (439, 56, 1))
validation_x = np.random.uniform(0,1, (10, 5, 20))
validation_y = np.random.uniform(0,1, (10, 56, 1))
decoder_zero_inputs = np.zeros((439, 56, 1)) ### <=== attention

fitting

history = model.fit([train_x, decoder_zero_inputs],train_y, epochs=epochs,
                     validation_split=0.3, verbose=1)

Epoch 1/100
307/307 [==============================] - 2s 8ms/step - loss: 0.1038 - val_loss: 0.0845
Epoch 2/100
307/307 [==============================] - 1s 2ms/step - loss: 0.0851 - val_loss: 0.0832
Epoch 3/100
307/307 [==============================] - 1s 2ms/step - loss: 0.0842 - val_loss: 0.0828

prediction on validation

pred_validation = model.predict([validation_x, np.zeros((10,56,1))])

回答2:

the attention layer in Keras is not a trainable layer (unless we use the scale parameter). it only computes matrix operation. In my opinion, this layer can result in some mistakes if applied directly on time series, but let proceed with order...

the most natural choice to replicate the attention mechanism on our time-series problem is to adopt the solution presented here and explained again here. It's the classical application of attention in enc-dec structure in NLP

following TF implementation, for our attention layer, we need query, value, key tensor in 3d format. we obtain these values directly from our recurrent layer. more specifically we utilize the sequence output and the hidden state. these are all we need to build an attention mechanism.

query is the output sequence [batch_dim, time_step, features]

value is the hidden state [batch_dim, features] where we add a temporal dimension for matrix operation [batch_dim, 1, features]

as the key, we utilize as before the hidden state so key = value

In the above definition and implementation I found 2 problems:

• the scores are calculated with softmax(dot(sequence, hidden)). the dot is ok but the softmax following Keras implementation is calculated on the last dimension and not on the temporal dimension. this implies the scores to be all 1 so they are useless
• the output attention is dot(scores, hidden) and not dot(scores, sequences) as we need

the example:

def attention_keras(query_value):

    query, value = query_value # key == value
    score = tf.matmul(query, value, transpose_b=True) # (batch, timestamp, 1)
    score = tf.nn.softmax(score) # softmax on -1 axis ==> score always = 1 !!!
    print((score.numpy()!=1).any()) # False ==> score always = 1 !!!
    score = tf.matmul(score, value) # (batch, timestamp, feat)
    return score

np.random.seed(33)
time_steps = 20
features = 50
sample = 5

X = np.random.uniform(0,5, (sample,time_steps,features))
state = np.random.uniform(0,5, (sample,features))
attention_keras([X,tf.expand_dims(state,1)]) # ==> the same as Attention(dtype='float64')([X,tf.expand_dims(state,1)])

so for this reason, for time series attention I propose this solution

def attention_seq(query_value, scale):

    query, value = query_value
    score = tf.matmul(query, value, transpose_b=True) # (batch, timestamp, 1)
    score = scale*score # scale with a fixed number (it can be finetuned or learned during train)
    score = tf.nn.softmax(score, axis=1) # softmax on timestamp axis
    score = score*query # (batch, timestamp, feat)
    return score

np.random.seed(33)
time_steps = 20
features = 50
sample = 5

X = np.random.uniform(0,5, (sample,time_steps,features))
state = np.random.uniform(0,5, (sample,features))
attention_seq([X,tf.expand_dims(state,1)], scale=0.05)

query is the output sequence [batch_dim, time_step, features]

value is the hidden state [batch_dim, features] where we add a temporal dimension for matrix operation [batch_dim, 1, features]

the weights are calculated with softmax(scale*dot(sequence, hidden)). the scale parameter is a scalar value that can be used to scale the weights before applying the softmax operation. the softmax is calculated correctly on the time dimension. the attention output is the weighted product of input sequence and scores. I use the scalar parameter as a fixed value, but it can be tuned or insert as a learnable weight in a custom layer (as scale parameter in Keras attention).

In term of network implementation these are the two possibilities available:

######### KERAS #########
inp = Input((time_steps,features))
seq, state = GRU(32, return_state=True, return_sequences=True)(inp)
att = Attention()([seq, tf.expand_dims(state,1)])

######### CUSTOM #########
inp = Input((time_steps,features))
seq, state = GRU(32, return_state=True, return_sequences=True)(inp)
att = Lambda(attention_seq, arguments={'scale': 0.05})([seq, tf.expand_dims(state,1)])

CONCLUSION

I don't know how much added-value an introduction of an attention layer in simple problems can have. If you have short sequences, I suggest you leave all as is. What I reported here is an answer where I express my considerations, I'll accept comment or consideration about possible mistakes or misunderstandings

---

In your model, these solutions can be embedded in this way

######### KERAS #########
inp = Input((n_features, n_steps))
seq, state = GRU(n_units, activation='relu',
                 return_state=True, return_sequences=True)(inp)
att = Attention()([seq, tf.expand_dims(state,1)])
x = GRU(n_units, activation='relu')(att)
x = Dense(64, activation='relu')(x)
x = Dropout(0.5)(x)
out = Dense(n_steps_out)(x)

model = Model(inp, out)
model.compile(optimizer='adam', loss='mse', metrics=['mse'])
model.summary()

######### CUSTOM #########
inp = Input((n_features, n_steps))
seq, state = GRU(n_units, activation='relu',
                 return_state=True, return_sequences=True)(inp)
att = Lambda(attention_seq, arguments={'scale': 0.05})([seq, tf.expand_dims(state,1)])
x = GRU(n_units, activation='relu')(att)
x = Dense(64, activation='relu')(x)
x = Dropout(0.5)(x)
out = Dense(n_steps_out)(x)

model = Model(inp, out)
model.compile(optimizer='adam', loss='mse', metrics=['mse'])
model.summary()