I am currently working on a basic raytracing program using C, and i have managed to so some simple shapes ex, sphere/box/plane/cone/..., and i also did some shading to them using phong illumination.
But my question is that i can get a hang of how i can ray trace a Hemisphere , like is there a set equation that define the Hemisphere if so enlighten me on it because i couldn't find any , or is there a set method to do it that i couldn't figure out.
I have also tried to tried to cut the sphere with a plane and only show the only the top half but it didn't work (I am still new to all this so my understanding may be wrong).
Edit: Ok, I am sorry because i am really new to all this but here is what i have tryied.
#include "raytacing.h"
t_env *init_sphere(t_env *e)
{
//sphere position and radius
e->sph.posi.x = 0;
e->sph.posi.y = 0;
e->sph.posi.z = -1;
e->sph.rad = 0;
e->sph.color = (t_color){255, 255, 128);
return (e);
}
t_env *init_plane(t_env *e)
{
//plane position
e->plane.posi.x = 0;
e->olane.posi.y = -0.5;
e->plane.posi.z = 0;
//plane normal
e->plane.norm.x = 0;
e->olane.norm.y = 1;
e->plane.norm.z = 0;
e->plane.color = (t_color){0, 255, 0);
return (e);
}
double inter_plane(t_env *e, double *t) //calculating plane intersection
{
t_vect dist;
double norm;
norm = dot(e->plane.normal, e->r.direction);
if (fabs(norm) > 1e-6)
{
dist = vect_sub(e->plane.posi, e->r.start);
e->t0 = dot(dist, e->plane.normal) / norm;
if (e->t0 < *t && e->t0 > 1e-6)
{
*t = e->t0;
return (1);
}
else
return (0);
}
return (0);
}
double inter_sph(t_env *e, double *t) //calculating sphere intersection
{
double delta;
double sqrtd;
t_vect dist;
e->a = dot(e->r.direction, e->r.direction);
dist = vect_sub(e->r.start, e->sph.posi);
e->b = 2 * dot(dist, e->r.direction);
e->c = dot(dist, dist) - e->sph.rad * e->sph.rad;
delta = e->b * e->b - 4 * e->a * e->c;
if (delta < 0)
return (0);
sqrtd = sqrt(delta);
e->t0 = (-e->b + sqrtd) / (2 * e->a);
e->t1 = (-e->b - sqrtd) / (2 * e->a);
if (e->t0 > e->t1)
e->t0 = e->t1;
if ((e->t0 > 1e-6) && (e->t0 < *t))
{
*t = e->t0;
return (1);
}
else
return (0);
}
double inter_hemisphere(t_env *e) //calculating hemisphere intersection
{
t_vect hit_normal;
if (inter_sph(e, &e->t) == 1)
{
hit_normal = vect_add(e->r.start, vect_scalaire(e->t, e->r.direction));
hit_normal = vect_normalize(hit_normal);
if (inter_plane(e, &(e->t)) == 1)
{
if (dot(e->plane.normal, hit_normal) < 0)
return (1);
return (0);
}
}
return (0);
}
the e->t is . supposed to be the closest distance to the camera so that i get an exact display of close and far objects
And here i tried to apply what Spektre said and got some thing displayed and look like something like this:
And when i try to rotate it i get this:
Edit2 : After using Spektre Method I got a functional Intersection of a Hemisphere and the intersection look something like this.
double inter_hemisphere(t_env *e, double *t)
{
double delta;
double sqrtd;
t_vect dist;
e->a = dot(e->r.direction, e->r.direction);
dist = vect_sub(e->r.start, e->sph.posi);
e->b = 2 * dot(dist, e->r.direction);
e->c = dot(dist, dist) - e->sph.rad * e->sph.rad;
delta = e->b * e->b - 4 * e->a * e->c;
if (delta < 0)
return (0);
sqrtd = sqrt(delta);
e->t0 = (-e->b + sqrtd) / (2 * e->a);
e->t1 = (-e->b - sqrtd) / (2 * e->a);
t_vect v2;
v2 = vect_add(e->r.start, vect_sub(vect_scalaire(e->t0, e->r.direction), e->sph.posi));
if (dot(e->plane.normal, v2) > 0.0)
e->t0 =-1.0;
v2 = vect_add(e->r.start, vect_sub(vect_scalaire(e->t1, e->r.direction), e->sph.posi));
if (dot(e->plane.normal, v2) > 0.0)
e->t1 =-1.0;
if (e->t0 < 0.0)
e->t0 = e->t1;
if (e->t1 < 0.0)
e->t1 = e->t0;
double tt;
tt = fmin(e->t0, e->t1);
if (tt <= 0.0)
tt = fmax(e->t0, e->t1);
if (tt > 1e-6 && tt < e->t)
{
*t = tt;
return (1);
}
return (0);
}
And here is the Result !!
The simplest way is to cut your sphere by a plane.
If you have plane normal than any direction (point on sphere - sphere center) with the same direction to normal is cut off. Simply by this condition:
dot(point on sphere - sphere center , plane normal ) > 0.0
But do not forget to test both intersections of ray and sphere as the closest one can be on the other side of plane ...
I tried to implement this into mine GLSL Ray tracer:
- Reflection and refraction impossible without recursive ray tracing?
And come up with this updated fragment shaders:
Vertex (no change):
//------------------------------------------------------------------
#version 420 core
//------------------------------------------------------------------
uniform float aspect;
uniform float focal_length;
uniform mat4x4 tm_eye;
layout(location=0) in vec2 pos;
out smooth vec2 txt_pos; // frag position on screen <-1,+1> for debug prints
out smooth vec3 ray_pos; // ray start position
out smooth vec3 ray_dir; // ray start direction
//------------------------------------------------------------------
void main(void)
{
vec4 p;
txt_pos=pos;
// perspective projection
p=tm_eye*vec4(pos.x/aspect,pos.y,0.0,1.0);
ray_pos=p.xyz;
p-=tm_eye*vec4(0.0,0.0,-focal_length,1.0);
ray_dir=normalize(p.xyz);
gl_Position=vec4(pos,0.0,1.0);
}
//------------------------------------------------------------------
Fragment (added hemispheres):
//------------------------------------------------------------------
#version 420 core
//------------------------------------------------------------------
// Ray tracer ver: 1.000
//------------------------------------------------------------------
in smooth vec3 ray_pos; // ray start position
in smooth vec3 ray_dir; // ray start direction
uniform float n0; // refractive index of camera origin
uniform int fac_siz; // square texture x,y resolution size
uniform int fac_num; // number of valid floats in texture
uniform sampler2D fac_txr; // scene mesh data texture
out layout(location=0) vec4 frag_col;
//---------------------------------------------------------------------------
#define _reflect
#define _refract
//---------------------------------------------------------------------------
void main(void)
{
const vec3 light_dir=normalize(vec3(0.1,0.1,1.0));
const float light_iamb=0.1; // dot offset
const float light_idir=0.5; // directional light amplitude
const vec3 back_col=vec3(0.2,0.2,0.2); // background color
const float _zero=1e-6; // to avoid intrsection with start point of ray
const int _fac_triangles =0; // r,g,b,a, n, triangle count, { x0,y0,z0,x1,y1,z1,x2,y2,z2 }
const int _fac_spheres =1; // r,g,b,a, n, sphere count, { x,y,z,r }
const int _fac_hemispheres=2; // r,g,b,a, n, hemisphere count,{ x,y,z,r,nx,ny,nz }
// ray scene intersection
struct _ray
{
dvec3 pos,dir,nor;
vec3 col;
float refl,refr;// reflection,refraction intensity coeficients
float n0,n1; // refaction index (start,end)
double l; // ray length
int lvl,i0,i1; // recursion level, reflect, refract
};
const int _lvls=4;
const int _rays=(1<<_lvls)-1;
_ray ray[_rays]; int rays;
dvec3 v0,v1,v2,pos;
vec3 c;
float refr,refl,n1;
double tt,t,a;
int i0,ii,num,id;
// fac texture access
vec2 st; int i,j; float ds=1.0/float(fac_siz-1);
#define fac_get texture(fac_txr,st).r; st.s+=ds; i++; j++; if (j==fac_siz) { j=0; st.s=0.0; st.t+=ds; }
// enque start ray
ray[0].pos=ray_pos;
ray[0].dir=normalize(ray_dir);
ray[0].nor=vec3(0.0,0.0,0.0);
ray[0].refl=0.0;
ray[0].refr=0.0;
ray[0].n0=n0;
ray[0].n1=1.0;
ray[0].l =0.0;
ray[0].lvl=0;
ray[0].i0=-1;
ray[0].i1=-1;
rays=1;
// loop all enqued rays
for (i0=0;i0<rays;i0++)
{
// loop through all objects
// find closest forward intersection between them and ray[i0]
// strore it to ray[i0].(nor,col)
// strore it to pos,n1
t=tt=-1.0; ii=1; ray[i0].l=0.0;
ray[i0].col=back_col;
pos=ray[i0].pos; n1=n0;
for (st=vec2(0.0,0.0),i=j=0;i<fac_num;)
{
c.r=fac_get; // RGBA
c.g=fac_get;
c.b=fac_get;
refl=fac_get;
refr=fac_get;
n1=fac_get; // refraction index
a=fac_get; id=int(a); // object type
a=fac_get; num=int(a); // face count
if (id==_fac_triangles)
for (;num>0;num--)
{
v0.x=fac_get; v0.y=fac_get; v0.z=fac_get;
v1.x=fac_get; v1.y=fac_get; v1.z=fac_get;
v2.x=fac_get; v2.y=fac_get; v2.z=fac_get;
dvec3 e1,e2,n,p,q,r;
double t,u,v,det,idet;
//compute ray triangle intersection
e1=v1-v0;
e2=v2-v0;
// Calculate planes normal vector
p=cross(ray[i0].dir,e2);
det=dot(e1,p);
// Ray is parallel to plane
if (abs(det)<1e-8) continue;
idet=1.0/det;
r=ray[i0].pos-v0;
u=dot(r,p)*idet;
if ((u<0.0)||(u>1.0)) continue;
q=cross(r,e1);
v=dot(ray[i0].dir,q)*idet;
if ((v<0.0)||(u+v>1.0)) continue;
t=dot(e2,q)*idet;
if ((t>_zero)&&((t<=tt)||(ii!=0)))
{
ii=0; tt=t;
// store color,n ...
ray[i0].col=c;
ray[i0].refl=refl;
ray[i0].refr=refr;
// barycentric interpolate position
t=1.0-u-v;
pos=(v0*t)+(v1*u)+(v2*v);
// compute normal (store as dir for now)
e1=v1-v0;
e2=v2-v1;
ray[i0].nor=cross(e1,e2);
}
}
if (id==_fac_spheres)
for (;num>0;num--)
{
float r;
v0.x=fac_get; v0.y=fac_get; v0.z=fac_get; r=fac_get;
// compute l0 length of ray(p0,dp) to intersection with sphere(v0,r)
// where rr= r^-2
double aa,bb,cc,dd,l0,l1,rr;
dvec3 p0,dp;
p0=ray[i0].pos-v0; // set sphere center to (0,0,0)
dp=ray[i0].dir;
rr = 1.0/(r*r);
aa=2.0*rr*dot(dp,dp);
bb=2.0*rr*dot(p0,dp);
cc= rr*dot(p0,p0)-1.0;
dd=((bb*bb)-(2.0*aa*cc));
if (dd<0.0) continue;
dd=sqrt(dd);
l0=(-bb+dd)/aa;
l1=(-bb-dd)/aa;
if (l0<0.0) l0=l1;
if (l1<0.0) l1=l0;
t=min(l0,l1); if (t<=_zero) t=max(l0,l1);
if ((t>_zero)&&((t<=tt)||(ii!=0)))
{
ii=0; tt=t;
// store color,n ...
ray[i0].col=c;
ray[i0].refl=refl;
ray[i0].refr=refr;
// position,normal
pos=ray[i0].pos+(ray[i0].dir*t);
ray[i0].nor=pos-v0;
}
}
if (id==_fac_hemispheres)
for (;num>0;num--)
{
float r;
v0.x=fac_get; v0.y=fac_get; v0.z=fac_get; r=fac_get;
v1.x=fac_get; v1.y=fac_get; v1.z=fac_get;
// compute l0 length of ray(p0,dp) to intersection with sphere(v0,r)
// where rr= r^-2
double aa,bb,cc,dd,l0,l1,rr;
dvec3 p0,dp;
p0=ray[i0].pos-v0; // set sphere center to (0,0,0)
dp=ray[i0].dir;
rr = 1.0/(r*r);
aa=2.0*rr*dot(dp,dp);
bb=2.0*rr*dot(p0,dp);
cc= rr*dot(p0,p0)-1.0;
dd=((bb*bb)-(2.0*aa*cc));
if (dd<0.0) continue;
dd=sqrt(dd);
l0=(-bb+dd)/aa;
l1=(-bb-dd)/aa;
// test both hits-v0 against normal v1
v2=ray[i0].pos+(ray[i0].dir*l0)-v0; if (dot(v1,v2)>0.0) l0=-1.0;
v2=ray[i0].pos+(ray[i0].dir*l1)-v0; if (dot(v1,v2)>0.0) l1=-1.0;
if (l0<0.0) l0=l1;
if (l1<0.0) l1=l0;
t=min(l0,l1); if (t<=_zero) t=max(l0,l1);
if ((t>_zero)&&((t<=tt)||(ii!=0)))
{
ii=0; tt=t;
// store color,n ...
ray[i0].col=c;
ray[i0].refl=refl;
ray[i0].refr=refr;
// position,normal
pos=ray[i0].pos+(ray[i0].dir*t);
ray[i0].nor=pos-v0;
}
}
}
ray[i0].l=tt;
ray[i0].nor=normalize(ray[i0].nor);
// split ray from pos and ray[i0].nor
if ((ii==0)&&(ray[i0].lvl<_lvls-1))
{
t=dot(ray[i0].dir,ray[i0].nor);
// reflect
#ifdef _reflect
if ((ray[i0].refl>_zero)&&(t<_zero)) // do not reflect inside objects
{
ray[i0].i0=rays;
ray[rays]=ray[i0];
ray[rays].lvl++;
ray[rays].i0=-1;
ray[rays].i1=-1;
ray[rays].pos=pos;
ray[rays].dir=ray[rays].dir-(2.0*t*ray[rays].nor);
ray[rays].n0=ray[i0].n0;
ray[rays].n1=ray[i0].n0;
rays++;
}
#endif
// refract
#ifdef _refract
if (ray[i0].refr>_zero)
{
ray[i0].i1=rays;
ray[rays]=ray[i0];
ray[rays].lvl++;
ray[rays].i0=-1;
ray[rays].i1=-1;
ray[rays].pos=pos;
t=dot(ray[i0].dir,ray[i0].nor);
if (t>0.0) // exit object
{
ray[rays].n0=ray[i0].n0;
ray[rays].n1=n0;
if (i0==0) ray[i0].n1=n1;
v0=-ray[i0].nor; t=-t;
}
else{ // enter object
ray[rays].n0=n1;
ray[rays].n1=ray[i0].n0;
ray[i0 ].n1=n1;
v0=ray[i0].nor;
}
n1=ray[i0].n0/ray[i0].n1;
tt=1.0-(n1*n1*(1.0-t*t));
if (tt>=0.0)
{
ray[rays].dir=(ray[i0].dir*n1)-(v0*((n1*t)+sqrt(tt)));
rays++;
}
}
#endif
}
else if (i0>0) // ignore last ray if nothing hit
{
ray[i0]=ray[rays-1];
rays--; i0--;
}
}
// back track ray intersections and compute output color col
// lvl is sorted ascending so backtrack from end
for (i0=rays-1;i0>=0;i0--)
{
// directional + ambient light
t=abs(dot(ray[i0].nor,light_dir)*light_idir)+light_iamb;
t*=1.0-ray[i0].refl-ray[i0].refr;
ray[i0].col.rgb*=float(t);
// reflect
ii=ray[i0].i0;
if (ii>=0) ray[i0].col.rgb+=ray[ii].col.rgb*ray[i0].refl;
// refract
ii=ray[i0].i1;
if (ii>=0) ray[i0].col.rgb+=ray[ii].col.rgb*ray[i0].refr;
}
frag_col=vec4(ray[0].col,1.0);
}
//---------------------------------------------------------------------------
The Vertex shader just creates the Ray position and direction which is interpolated by GPU and then Fragment shader handles each ray (per pixel).
I use this scene:
// init mesh raytracer
ray.gl_init();
ray.beg();
// r g b rfl rfr n
ray.add_material(1.0,0.7,0.1,0.3,0.0,_n_glass); ray.add_hemisphere( 0.0, 0.0, 2.0,0.5, 0.0, 0.0, 1.0);
ray.add_material(1.0,1.0,1.0,0.3,0.0,_n_glass); ray.add_box ( 0.0, 0.0, 6.0,9.0,9.0,0.1);
ray.add_material(1.0,1.0,1.0,0.1,0.8,_n_glass); ray.add_sphere ( 0.0, 0.0, 0.5,0.5);
ray.add_material(1.0,0.1,0.1,0.3,0.0,_n_glass); ray.add_sphere (+2.0, 0.0, 2.0,0.5);
ray.add_material(0.1,1.0,0.1,0.3,0.0,_n_glass); ray.add_box (-2.0, 0.0, 2.0,0.5,0.5,0.5);
ray.add_material(0.1,0.1,1.0,0.3,0.0,_n_glass);
ray.add_tetrahedron
(
0.0, 0.0, 3.0,
-1.0,-1.0, 4.0,
+1.0,-1.0, 4.0,
0.0,+1.0, 4.0
);
ray.end();
containing single yellow hemisphere at (0.0, 0.0, 2.0) with radius r=0.5 and plane normal (0.0, 0.0, 1.0). Rotation of the object can by done simply by rotating the plane normal.
And this is preview:
As you can see hemisphere is working by just cutting with a plane ... The only important code from above for you is this (see the *** comments):
if (id==_fac_hemispheres) // *** ignore
for (;num>0;num--) // *** ignore
{
float r;
// *** here v0 is center, v1 is plane normal and r is radius
v0.x=fac_get; v0.y=fac_get; v0.z=fac_get; r=fac_get;
v1.x=fac_get; v1.y=fac_get; v1.z=fac_get;
// *** this is ray/ellipsoid intersection returning l0,l1 ray distances for both hits
// compute l0 length of ray(p0,dp) to intersection with sphere(v0,r)
// where rr= r^-2
double aa,bb,cc,dd,l0,l1,rr;
dvec3 p0,dp;
p0=ray[i0].pos-v0; // set sphere center to (0,0,0)
dp=ray[i0].dir;
rr = 1.0/(r*r);
aa=2.0*rr*dot(dp,dp);
bb=2.0*rr*dot(p0,dp);
cc= rr*dot(p0,p0)-1.0;
dd=((bb*bb)-(2.0*aa*cc));
if (dd<0.0) continue;
dd=sqrt(dd);
l0=(-bb+dd)/aa;
l1=(-bb-dd)/aa;
// *** this thro away hits on wrong side of plane
// test both hits-v0 against normal v1
v2=ray[i0].pos+(ray[i0].dir*l0)-v0; if (dot(v1,v2)>0.0) l0=-1.0;
v2=ray[i0].pos+(ray[i0].dir*l1)-v0; if (dot(v1,v2)>0.0) l1=-1.0;
// *** this is just using closer valid hit
if (l0<0.0) l0=l1;
if (l1<0.0) l1=l0;
t=min(l0,l1); if (t<=_zero) t=max(l0,l1);
if ((t>_zero)&&((t<=tt)||(ii!=0)))
{
ii=0; tt=t;
// store color,n ...
ray[i0].col=c;
ray[i0].refl=refl;
ray[i0].refr=refr;
// position,normal
pos=ray[i0].pos+(ray[i0].dir*t);
ray[i0].nor=pos-v0;
}
}
I used mine ray and ellipsoid intersection accuracy improvement as it returns both hits not just the first one.
If you cross check the spheres and hemispheres you will see I just added these two lines:
v2=ray[i0].pos+(ray[i0].dir*l0)-v0; if (dot(v1,v2)>0.0) l0=-1.0;
v2=ray[i0].pos+(ray[i0].dir*l1)-v0; if (dot(v1,v2)>0.0) l1=-1.0;
which just converts ray distances to hit positions and computing the condition mentioned above...
{var%20f='http://v.t.sina.com.cn/share/share.php?appkey=1515056452',u=z||d.location,p=['&url=',e(u),'&title=',e(t||d.title),'&source=',e(r),'&sourceUrl=',e(l),'&content=',c||'gb2312','&pic=',e(p||'')].join('');function%20a(){if(!window.open([f,p].join(''),'mb',['toolbar=0,status=0,resizable=1,width=440,height=430,left=',(s.width-440)/2,',top=',(s.height-430)/2].join('')))u.href=[f,p].join('');};if(/Firefox/.test(navigator.userAgent))setTimeout(a,0);else%20a();})(screen,document,encodeURIComponent,'','','https://i.stack.imgur.com/Q6yi8.png', '推荐 爷的心禁止访问 的文章《Ray tracing a Hemisphere》','https://www.manongdao.com/article-2051699.html','页面编码gb2312|utf-8默认gb2312'));){kind=link}