For an assignment, I'm supposed to create a script called my_which.sh that will "do the same thing as the Unix command, but do it using a for loop over an if." I am also not allowed to call which in my script.
I'm brand new to this, and have been reading tutorials, but I'm pretty confused on how to start. Doesn't which just list the path name of a command?
If so, how would I go about displaying the correct path name without calling which, and while using a for loop and an if statement?
For example, if I run my script, it will echo % and wait for input. But then how do I translate that to finding the directory? So it would look like this?
#!/bin/bash
path=(`echo $PATH`)
echo -n "% "
read ans
for i in $path
do
if [ -d $i ]; then
echo $i
fi
done
I would appreciate any help, or even any starting tutorials that can help me get started on this. I'm honestly very confused on how I should implement this.
Split your PATH variable safely. This is a general method to split a string at delimiters, that is 100% safe regarding any possible characters (including newlines):
IFS=: read -r -d '' -a paths < <(printf '%s:\0' "$PATH")
We artificially added : because if PATH ends with a trailing :, then it is understood that current directory should be in PATH. While this is dangerous and not recommended, we must also take it into account if we want to mimic which. Without this trailing colon, a PATH like /bin:/usr/bin: would be split into
declare -a paths='( [0]="/bin" [1]="/usr/bin" )'
whereas with this trailing colon the resulting array is:
declare -a paths='( [0]="/bin" [1]="/usr/bin" [2]="" )'
This is one detail that other answers miss. Of course, we'll do this only if PATH is set and non-empty.
With this split PATH, we'll use a for-loop to check whether the argument can be found in the given directory. Note that this should be done only if argument doesn't contain a / character! this is also something other answers missed.
My version of which handles a unique option -a that print all matching pathnames of each argument. Otherwise, only the first match is printed. We'll have to take this into account too.
My version of which handles the following exit status:
0 if all specified commands are found and executable
1 if one or more specified commands is nonexistent or not executable
2 if an invalid option is specified
We'll handle that too.
I guess the following mimics rather faithfully the behavior of my which (and it's pure Bash):
#!/bin/bash
show_usage() {
printf 'Usage: %s [-a] args\n' "$0"
}
illegal_option() {
printf >&2 'Illegal option -%s\n' "$1"
show_usage
exit 2
}
check_arg() {
if [[ -f $1 && -x $1 ]]; then
printf '%s\n' "$1"
return 0
else
return 1
fi
}
# manage options
show_only_one=true
while (($#)); do
[[ $1 = -- ]] && { shift; break; }
[[ $1 = -?* ]] || break
opt=${1#-}
while [[ $opt ]]; do
case $opt in
(a*) show_only_one=false; opt=${opt#?} ;;
(*) illegal_option "${opt:0:1}" ;;
esac
done
shift
done
# If no arguments left or empty PATH, exit with return code 1
(($#)) || exit 1
[[ $PATH ]] || exit 1
# split path
IFS=: read -r -d '' -a paths < <(printf '%s:\0' "$PATH")
ret=0
# loop on arguments
for arg; do
# Check whether arg contains a slash
if [[ $arg = */* ]]; then
check_arg "$arg" || ret=1
else
this_ret=1
for p in "${paths[@]}"; do
if check_arg "${p:-.}/$arg"; then
this_ret=0
"$show_only_one" && break
fi
done
((this_ret==1)) && ret=1
fi
done
exit "$ret"
To test whether an argument is executable or not, I'm checking whether it's a regular file1 which is executable with:
[[ -f $arg && -x $arg ]]
I guess that's close to my which's behavior.
1 As @mklement0 points out (thanks!) the -f test, when applied against a symbolic link, tests the type of the symlink's target.
#!/bin/bash
#Get the user's first argument to this script
exe_name=$1
#Set the field separator to ":" (this is what the PATH variable
# uses as its delimiter), then read the contents of the PATH
# into the array variable "paths" -- at the same time splitting
# the PATH by ":"
IFS=':' read -a paths <<< $PATH
#Iterate over each of the paths in the "paths" array
for e in ${paths[*]}
do
#Check for the $exe_name in this path
find $e -name $exe_name -maxdepth 1
done
This is similar to the accepted answer with the difference that it does not set the IFS and checks if the execute bits are set.
#!/bin/bash
for i in $(echo "$PATH" | tr ":" "\n")
do
find "$i" -name "$1" -perm +111 -maxdepth 1
done
Save this as my_which.sh (or some other name) and run it as ./my_which java etc.
However if there is an "if" required:
#!/bin/bash
for i in $(echo "$PATH" | tr ":" "\n")
do
# this is a one liner that works. However the user requires an if statment
# find "$i" -name "$1" -perm +111 -maxdepth 1
cmd=$i/$1
if [[ ( -f "$cmd" || -L "$cmd" ) && -x "$cmd" ]]
then
echo "$cmd"
break
fi
done
You might want to take a look at this link to figure out the tests in the "if".
For a complete, rock-solid implementation, see gniourf_gniourf's answer.
Here's a more concise alternative that makes do with a single invocation of find [per name to investigate].
The OP later clarified that an if statement should be used in a loop, but the question is general enough to warrant considering other approaches.
A naïve implementation would even work as a one-liner, IF you're willing to make a few assumptions (the example uses 'ls' as the executable to locate):
find -L ${PATH//:/ } -maxdepth 1 -type f -perm -u=x -name 'ls' 2>/dev/null
The assumptions - which will hold in many, but not all situations - are:
$PATH must not contain entries that when used unquoted result in shell expansions (e.g., no embedded spaces that would result in word splitting, no characters such as * that would result in pathname expansion)$PATH must not contain an empty entry (which must be interpreted as the current dir).
Explanation:
-L tells find to investigate the targets of symlinks rather than the symlinks themselves - this ensures that symlinks to executable files are also recognized by -type f${PATH//:/ } replaces all : chars. in $PATH with a space each, causing the result - due to being unquoted - to be passed as individual arguments split by spaces.-maxdepth 1 instructs find to only look directly in each specified directory, not also in subdirectories-type f matches only files, not directories.-perm -u=x matches only files and directories that the current user (u) can execute (x).2>/dev/null suppresses error messages that may stem from non-existent directories in the $PATH or failed attempts to access files due to lack of permission.
Here's a more robust script version:
Note:
- For brevity, only handles a single argument (and no options).
- Does NOT handle the case where entries or result paths may contain embedded
\n chars - however, this is extremely rare in practice and likely leads to bigger problems overall.
#!//bin/bash
# Assign argument to variable; error out, if none given.
name=${1:?Please specify an executable filename.}
# Robustly read individual $PATH entries into a bash array, splitting by ':'
# - The additional trailing ':' ensures that a trailing ':' in $PATH is
# properly recognized as an empty entry - see gniourf_gniourf's answer.
IFS=: read -r -a paths <<<"${PATH}:"
# Replace empty entries with '.' for use with `find`.
# (Empty entries imply '.' - this is legacy behavior mandated by POSIX).
for (( i = 0; i < "${#paths[@]}"; i++ )); do
[[ "${paths[i]}" == '' ]] && paths[i]='.'
done
# Invoke `find` with *all* directories and capture the 1st match, if any, in a variable.
# Simply remove `| head -n 1` to print *all* matches.
match=$(find -L "${paths[@]}" -maxdepth 1 -type f -perm -u=x -name "$name" 2>/dev/null |
head -n 1)
# Print result, if found, and exit with appropriate exit code.
if [[ -n $match ]]; then
printf '%s\n' "$match"
exit 0
else
exit 1
fi
