How can I find a Docker image with a specific tag

2019-01-21 18:20发布

站内文章 / Docker
13 0 0

问题:

I try to locate one specific tag for a Docker image. How can I do it on the command line? I try to avoid to download all and remove unneeded images.

In the official Ubuntu release, https://registry.hub.docker.com/_/ubuntu/, there are several tags (release for it), while when I search it on the command line,

user@ubuntu:~$ docker search ubuntu | grep ^ubuntu
ubuntu              Official Ubuntu base image                          354
ubuntu-upstart      Upstart is an event-based replacement for ...   7
ubuntufan/ping                                                0
ubuntu-debootstrap                                                   0

Also in the help of command line search https://docs.docker.com/engine/reference/commandline/search/, no clue how it can work?

Is it possible in the docker search command?

If I use a raw command to search via the Docker registry API, then the information can be fetched:

   $ curl https://registry.hub.docker.com//v1/repositories/ubuntu/tags | python -mjson.tool
   [
    {
        "layer": "ef83896b",
        "name": "latest"
    },
    .....
    {
        "layer": "463ff6be",
        "name": "raring"
    },
    {
        "layer": "195eb90b",
        "name": "saucy"
    },
    {
        "layer": "ef83896b",
        "name": "trusty"
    }
]

回答1:

As far as I know, the CLI does not allow searching/listing tags in a repository.

But if you know which tag you want, you can pull that explicitly by adding a colon and the image name: docker pull ubuntu:saucy



回答2:

When using CoreOS jq is available to parse JSON data.

So like you were doing before, looking at library/centos

admin@coreos ~/curl -s -S 'https://registry.hub.docker.com/v2/repositories/library/centos/tags/' | jq '."results"[]["name"]' |sort
"6"
"6.7"
"centos5"
"centos5.11"
"centos6"
"centos6.6"
"centos6.7"
"centos7.0.1406"
"centos7.1.1503"
"latest"

The cleaner v2 API is available now, and that's what I'm using in the example. I will build a simple script docker_remote_tags:

#!/usr/bin/bash
curl -s -S "https://registry.hub.docker.com/v2/repositories/library/$@/tags/" | jq '."results"[]["name"]' |sort

Enables:

$ ./docker_remote_tags library/centos
"6"
"6.7"
"centos5"
"centos5.11"
"centos6"
"centos6.6"
"centos6.7"
"centos7.0.1406"
"centos7.1.1503"
"latest"

Reference:

jq: https://stedolan.github.io/jq/ | apt-get install jq



回答3:

This script (docker-show-repo-tags.sh) should work for any Docker enabled host that has curl, sed, grep, and sort. This was updated to reflect the fact the repository tag URLs changed.

#!/bin/sh
#
# Simple script that will display Docker repository tags
# using basic tools: curl, sed, grep, and sort.
#
# Usage:
#   $ docker-show-repo-tags.sh ubuntu centos
for Repo in $* ; do
    curl -sS "https://hub.docker.com/r/library/$Repo/tags/" | \
        sed -e $'s/"tags":/\\\n"tags":/g' -e $'s/\]/\\\n\]/g' | \
        grep '^"tags"' | \
        grep '"library"' | \
        sed -e $'s/,/,\\\n/g' -e 's/,//g' -e 's/"//g' | \
        grep -v 'library:' | \
        sort -fu | \
        sed -e "s/^/${Repo}:/"
done

This older version no longer works.

#!/bin/sh
# WARNING: This no long works!
# Simple script that will display Docker repository tags.
#
# Usage:
#   $ docker-show-repo-tags.sh ubuntu centos
for Repo in $* ; do
  curl -s -S "https://registry.hub.docker.com/v2/repositories/library/$Repo/tags/" | \
    sed -e $'s/,/,\\\n/g' -e $'s/\[/\\\[\n/g' | \
    grep '"name"' | \
    awk -F\" '{print $4;}' | \
    sort -fu | \
    sed -e "s/^/${Repo}:/"
done

This is the output for a simple example:

$ docker-show-repo-tags.sh centos | cat -n
     1    centos:5
     2    centos:5.11
     3    centos:6
     4    centos:6.10
     5    centos:6.6
     6    centos:6.7
     7    centos:6.8
     8    centos:6.9
     9    centos:7.0.1406
    10    centos:7.1.1503
    11    centos:7.2.1511
    12    centos:7.3.1611
    13    centos:7.4.1708
    14    centos:7.5.1804
    15    centos:centos5
    16    centos:centos5.11
    17    centos:centos6
    18    centos:centos6.10
    19    centos:centos6.6
    20    centos:centos6.7
    21    centos:centos6.8
    22    centos:centos6.9
    23    centos:centos7
    24    centos:centos7.0.1406
    25    centos:centos7.1.1503
    26    centos:centos7.2.1511
    27    centos:centos7.3.1611
    28    centos:centos7.4.1708
    29    centos:centos7.5.1804
    30    centos:latest


回答4:

I didn't like any of the solutions above because A) they required external libraries that I didn't have and didn't want to install. B) I didn't get all the pages.

The Docker API limits you to 100 items per request. This will loop over each "next" item and get them all (for Python its 7 pages; other may be more or less.. depends)

If you really want to spam yourself, remove | cut -d '-' -f 1 from the last line, and you will see absolutely everything.

url=https://registry.hub.docker.com/v2/repositories/library/redis/tags/?page_size=100 `# Initial url` ; \
( \
  while [ ! -z $url ]; do `# Keep looping until the variable url is empty` \
    >&2 echo -n "." `# Every iteration of the loop prints out a single dot to show progress as it got through all the pages (this is inline dot)` ; \
    content=$(curl -s $url | python -c 'import sys, json; data = json.load(sys.stdin); print(data.get("next", "") or ""); print("\n".join([x["name"] for x in data["results"]]))') `# Curl the URL and pipe the output to Python. Python will parse the JSON and print the very first line as the next URL (it will leave it blank if there are no more pages) then continue to loop over the results extracting only the name; all will be stored in a variable called content` ; \
    url=$(echo "$content" | head -n 1) `# Let's get the first line of content which contains the next URL for the loop to continue` ; \
    echo "$content" | tail -n +2 `# Print the content without the first line (yes +2 is counter intuitive)` ; \
  done; \
  >&2 echo `# Finally break the line of dots` ; \
) | cut -d '-' -f 1 | sort --version-sort | uniq;

Sample output:

$ url=https://registry.hub.docker.com/v2/repositories/library/redis/tags/?page_size=100 `#initial url` ; \
> ( \
>   while [ ! -z $url ]; do `#Keep looping until the variable url is empty` \
>     >&2 echo -n "." `#Every iteration of the loop prints out a single dot to show progress as it got through all the pages (this is inline dot)` ; \
>     content=$(curl -s $url | python -c 'import sys, json; data = json.load(sys.stdin); print(data.get("next", "") or ""); print("\n".join([x["name"] for x in data["results"]]))') `# Curl the URL and pipe the JSON to Python. Python will parse the JSON and print the very first line as the next URL (it will leave it blank if there are no more pages) then continue to loop over the results extracting only the name; all will be store in a variable called content` ; \
>     url=$(echo "$content" | head -n 1) `#Let's get the first line of content which contains the next URL for the loop to continue` ; \
>     echo "$content" | tail -n +2 `#Print the content with out the first line (yes +2 is counter intuitive)` ; \
>   done; \
>   >&2 echo `#Finally break the line of dots` ; \
> ) | cut -d '-' -f 1 | sort --version-sort | uniq;
...
2
2.6
2.6.17
2.8
2.8.6
2.8.7
2.8.8
2.8.9
2.8.10
2.8.11
2.8.12
2.8.13
2.8.14
2.8.15
2.8.16
2.8.17
2.8.18
2.8.19
2.8.20
2.8.21
2.8.22
2.8.23
3
3.0
3.0.0
3.0.1
3.0.2
3.0.3
3.0.4
3.0.5
3.0.6
3.0.7
3.0.504
3.2
3.2.0
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
3.2.6
3.2.7
3.2.8
3.2.9
3.2.10
3.2.11
3.2.100
4
4.0
4.0.0
4.0.1
4.0.2
4.0.4
4.0.5
4.0.6
4.0.7
4.0.8
32bit
alpine
latest
nanoserver
windowsservercore

If you want the bash_profile version:

function docker-tags () {
  name=$1
  # Initial URL
  url=https://registry.hub.docker.com/v2/repositories/library/$name/tags/?page_size=100
  (
    # Keep looping until the variable URL is empty
    while [ ! -z $url ]; do
      # Every iteration of the loop prints out a single dot to show progress as it got through all the pages (this is inline dot)
      >&2 echo -n "."
      # Curl the URL and pipe the output to Python. Python will parse the JSON and print the very first line as the next URL (it will leave it blank if there are no more pages)
      # then continue to loop over the results extracting only the name; all will be stored in a variable called content
      content=$(curl -s $url | python -c 'import sys, json; data = json.load(sys.stdin); print(data.get("next", "") or ""); print("\n".join([x["name"] for x in data["results"]]))')
      # Let's get the first line of content which contains the next URL for the loop to continue
      url=$(echo "$content" | head -n 1)
      # Print the content without the first line (yes +2 is counter intuitive)
      echo "$content" | tail -n +2
    done;
    # Finally break the line of dots
    >&2 echo
  ) | cut -d '-' -f 1 | sort --version-sort | uniq;
}

And simply call it: docker-tags redis

Sample output:

$ docker-tags redis
...
2
2.6
2.6.17
2.8

--trunc----

32bit
alpine
latest
nanoserver
windowsservercore


回答5:

I wrote a command line tool to simplify searching DockerHub repo tags, available in my PyTools GitHub repo. It's simple to use with various command line switches, but most basically:

./dockerhub_show_tags.py repo1 repo2

It's even available as a docker image and can take multiple repos:

docker run harisekhon/pytools dockerhub_show_tags.py centos ubuntu 

DockerHub

repo: centos
tags: 5.11
      6.6
      6.7
      7.0.1406
      7.1.1503
      centos5.11
      centos6.6
      centos6.7
      centos7.0.1406
      centos7.1.1503

repo: ubuntu
tags: latest
      14.04
      15.10
      16.04
      trusty
      trusty-20160503.1
      wily
      wily-20160503
      xenial
      xenial-20160503

If you want to embed in scripts use -q / --quiet to get just the tags, like normal docker commands:

./dockerhub_show_tags.py centos -q
5.11
6.6
6.7
7.0.1406
7.1.1503
centos5.11
centos6.6
centos6.7
centos7.0.1406
centos7.1.1503


回答6:

The v2 API seems to use some kind of pagination, so that it does not return all the available tags. This is clearly visible in projects such as python (or library/python). Even after quickly reading the documentation, I could not manage to work with the API correctly (maybe it is the wrong documentation).

Then I rewrote the script using the v1 API, and still using jq:

#!/bin/bash

repo="$1"

if [[ "${repo}" != */* ]]; then
    repo="library/${repo}"
fi

url="https://registry.hub.docker.com/v1/repositories/${repo}/tags"
curl -s -S "${url}" | jq '.[]["name"]' | sed 's/^"\(.*\)"$/\1/' | sort

The full script is available at: https://bitbucket.org/denilsonsa/small_scripts/src/default/docker_remote_tags.sh

I've also written (in Python) an improved version that aggregates tags that point to the same version: https://bitbucket.org/denilsonsa/small_scripts/src/default/docker_remote_tags.py



回答7:

Add this function to your .zshrc file or run the command mannually

#usage list-dh-tags <repo>
#example: list-dh-tags node
function list-dh-tags(){
    wget -q https://registry.hub.docker.com/v1/repositories/$1/tags -O -  | sed -e 's/[][]//g' -e 's/"//g' -e 's/ //g' | tr '}' '\n'  | awk -F: '{print $3}'
}

thanks to this -> How to list all tags for a Docker image on a remote registry?



回答8:

Reimplementation of the previous post, using Python over sed/awk:

for Repo in $* ; do
    tags=$(curl -s -S "https://registry.hub.docker.com/v2/repositories/library/$Repo/tags/")
    python - <<EOF

import json

tags = [t['name'] for t in json.loads('''$tags''')['results']]
tags.sort()
for tag in tags:
    print "{}:{}".format('$Repo', tag)
EOF
done


回答9:

For a script that works with Oauth bearer tokens on Docker hub, try this:

Listing the tags of a Docker image on a Docker hub through the HTTP API



标签： docker
举报

收藏的人(0)

Ta的文章 更多文章
登录 后发表评论
0条评论
还没有人评论过~