Algorithm to compute a Voronoi diagram on a sphere

问题:

I'm looking for a simple (if exists) algorithm to find the Voronoi diagram for a set of points on the surface of a sphere. Source code would be great. I'm a Delphi man (yes, I know...), but I eat C-code too.

回答1:

Here's a paper on spherical Voronoi diagrams.

Or if you grok Fortran (bleah!) there's this site.

回答2:

Update in July 2016:

Thanks to a number of volunteers (especially Nikolai Nowaczyk and I), there is now far more robust / correct code for handling Voronoi diagrams on the surface of a sphere in Python. This is officially available as scipy.spatial.SphericalVoronoi from version 0.18 of scipy onwards. There's a working example of usage and plotting in the official docs.

The algorithm follows quadratic time complexity. While loglinear is the theoretical optimum for Voronoi diagrams on the surfaces of spheres, this is currently the best we've been able to implement. If you'd like to find out more and help with the development effort there are some open issues related to improving the way Python handles spherical Voronoi diagrams and the related data structures:

• Effort to improve the plotting of spherical polygons in matplotlib
• Effort to improve the handling of spherical polygon surface area calculations in scipy

For further background on the theory / development / challenges related to this Python code and related computational geometry efforts you can also check out some talks from Nikolai and I:

• Nikolai PyData London 2016 talk
• Tyler PyData London 2015 talk
• Tyler PyCon 2016 Computational Geometry tutorial

---

Original Answer:

I've actually recently written some open source Python code for Voronoi diagrams on the surface of a sphere: https://github.com/tylerjereddy/py_sphere_Voronoi

The usage, algorithm, and limitations are documented on readthedocs (http://py-sphere-voronoi.readthedocs.org/en/latest/voronoi_utility.html). There are some detailed examples there but I'll place one or two below as well. The module also handles the calculation of the Voronoi region surface areas, albeit with some numerical weaknesses in the current development version.

I haven't seen many well-documented open source implementations for spherical Voronoi diagrams, but there has been a bit of buzz about the JavaScript implementation on Jason Davies' website (http://www.jasondavies.com/maps/voronoi/). I don't think his code is open though. I also saw a blog post about using Python to deal with part of the problem (http://jellymatter.com/2014/01/29/voronoi-tessellation-on-the-surface-of-a-sphere-python-code/). Many of the primary literature sources cited in the above posts seemed very challenging to implement (I tried some of them) but maybe some people will find my implementation useful or even suggest ways to improve it.

Examples:

1) Produce a Voronoi diagram for a pseudo-random set of points on the unit sphere:

import matplotlib
import matplotlib.pyplot as plt
import matplotlib.colors as colors
from mpl_toolkits.mplot3d import Axes3D
from mpl_toolkits.mplot3d.art3d import Poly3DCollection
import numpy as np
import scipy as sp
import voronoi_utility
#pin down the pseudo random number generator (prng) object to avoid certain pathological generator sets
prng = np.random.RandomState(117) #otherwise, would need to filter the random data to ensure Voronoi diagram is possible
#produce 1000 random points on the unit sphere using the above seed
random_coordinate_array = voronoi_utility.generate_random_array_spherical_generators(1000,1.0,prng)
#produce the Voronoi diagram data
voronoi_instance = voronoi_utility.Voronoi_Sphere_Surface(random_coordinate_array,1.0)
dictionary_voronoi_polygon_vertices = voronoi_instance.voronoi_region_vertices_spherical_surface()
#plot the Voronoi diagram
fig = plt.figure()
fig.set_size_inches(2,2)
ax = fig.add_subplot(111, projection='3d')
for generator_index, voronoi_region in dictionary_voronoi_polygon_vertices.iteritems():
   random_color = colors.rgb2hex(sp.rand(3))
   #fill in the Voronoi region (polygon) that contains the generator:
   polygon = Poly3DCollection([voronoi_region],alpha=1.0)
   polygon.set_color(random_color)
   ax.add_collection3d(polygon)
ax.set_xlim(-1,1);ax.set_ylim(-1,1);ax.set_zlim(-1,1);
ax.set_xticks([-1,1]);ax.set_yticks([-1,1]);ax.set_zticks([-1,1]); 
plt.tick_params(axis='both', which='major', labelsize=6)

2) Calculate the surface areas of the Voronoi region polygons and verify that the reconstituted surface area is sensible:

import math
dictionary_voronoi_polygon_surface_areas = voronoi_instance.voronoi_region_surface_areas_spherical_surface()
theoretical_surface_area_unit_sphere = 4 * math.pi
reconstituted_surface_area_Voronoi_regions = sum(dictionary_voronoi_polygon_surface_areas.itervalues())
percent_area_recovery = round((reconstituted_surface_area_Voronoi_regions / theoretical_surface_area_unit_sphere) * 100., 5)
print percent_area_recovery
97.87551 #that seems reasonable for now

回答3:

Notice that Delaunay triangulation on a sphere is just the convex hull. Thus you can compute the 3D convex hull (e.g. using CGAL) and take the dual.

回答4:

In short, try cssgrid from NCAR Graphics. I wrote a longer answer for a similar question at codereview.stackexchange.com.

回答5:

There is a paper from INRIA about the Delaunay Triangulation (DT) of points lying on a sphere: CAROLI, Manuel, et al. Robust and Efficient Delaunay triangulations of points on or close to a sphere. 2009. where they talk about an implementation in CGAL.

The paper refers to various available implementation of DT algorithms.

Quoting from the paper:

An easy and standard answer consists in computing the 3D convex hull of the points, which is notoriously equivalent.

for computing the convex hull the paper suggests:

1. Hull, a program for convex hulls.
2. Qhull.
3. Three-dimensional convex hulls. in FORTRAN.Three-dimensional convex hulls.
4. STRIPACK in FORTRAN.

The DT C++ class of CGAL has the method dual to get the Voronoi Diagram.

According to this post by Monique Teillaud (one of the author of the above mentioned paper) it seems to me that in November 2012 the implementation was not still ready.

回答6:

It's been a while since the question has been answered, but I've found two papers that implement Fortune's algorithm (efficiency O(N lg N), memory O(N)) over the surface of the sphere. Maybe a future viewer will find this information useful.

• "Sweeping the Sphere" by Dinis and Mamede, published in the 2010 International Symposium on Voronoi Diagrams in Science and Engineering. Can be purchased at http://dx.doi.org/10.1109/ISVD.2010.32
• "A Plane Sweep Algorithm for the Voronoi Tessellation of the Sphere" by Zheng et al. I'm not sure it was published because of the first one, but it is dated 13 December 2011. It is available for free at http://www.e-lc.org/tmp/Xiaoyu__Zheng_2011_12_05_14_35_11.pdf

I'm working through them myself at the moment, so I can't explain it well. The basic idea is that Fortune's algorithm works on the surface of the sphere so long as you calculate the points' bounding parabolas correctly. Because the surface of the sphere wraps, you can also use a circular list to contain the beach line and not worry about handling cells at the edge of rectangular space. With that, you can sweep from the north pole of the sphere to the south and back up again, skipping to sites that introduce new points to the beach line (adding a parabola to the beach line) or the introduction of cell vertices (removing a parabola from the beach line).

Both papers expect a high level of comfort with linear algebra to understand the concepts, and they both keep losing me at the point they start explaining the algorithm itself. Neither provide source code, unfortunately.

回答7:

I think the Voronoi plane for each point can be constructed using non-Euclidian geometry. What was normally a line on a 2d plane, is now a 'great circle' on the sphere (see Wikipedia:elliptic geometry). It is easy to find which points are on the wrong side of any great circle between two points, by simply rotating the sphere such that the dividing great circle is the equator, and then it's all points on the other hemisphere than the point you're constructing the Voronoi plane for.

This is not the entire answer, but this is where I'd start..

回答8:

There's a nice Voronoi diagram example program here (including source code for Delphi 5/6).

I think "points on the surface of a sphere" means that you first have to remap them to 2D-coordinates, create the Voronoi diagram and then remap them to sphere surface coordinates. Are the two formulas from Wikipedia UV mapping article working here?

Also notice that the Voronoi diagram will have the wrong topology (it is inside a rectangle and does not "wrap around"), here it could help to copy all the points from (0,0)-(x, y) to the neighbour regions above (0, -y * 2)-(x, 0), below (0, y)-(x, y * 2), left (-x, 0)-(0, y) and right (x, 0)-(x*2, y). I hope you know what I mean, feel free to ask :)

回答9:

CGAL is working on the "spherical kernel" package, which would allow to compute exactly these kind of things. Unfortunately, is not released yet, but maybe it will be in their next release, since they already mentioned it in a google tech talk in march

回答10:

Quoting from this reference: http://www.qhull.org/html/qdelaun.htm

To compute the Delaunay triangulation of points on a sphere, compute their convex hull. If the sphere is the unit sphere at the origin, the facet normals are the Voronoi vertices of the input.

回答11:

If your points are within one hemisphere, you could do a gnomonic projection from spherical to planar coordinates, and then triangulate, since great-circles become straight lines of shortest distance.