Windows could not start the Apache2 on Local Compu

问题:

During the installation of Apache2 I got the following message into cmd window:

Installing the Apache2.2 service The Apache2.2 service is successfully installed. Testing httpd.conf....

Errors reported here must be corrected before the service can be started. httpd.exe: Could not reliably determine the server's fully qualified domain name , using 192.168.1.3 for ServerName (OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. : make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Note the errors or messages above, and press the key to exit. 24...

and after installing everything look fine, but it isn't. If I try to start service I got the following message:

Windows could not start the Apache2 on Local Computer. For more information, review the System Event Log. If this is a non-Micorsoft service, contact the service vendor, and refer to service-specific error code 1.

Apach2 version is 2.2.9

Does anyone have the same problem, or could help me.

回答1:

There is some other program listening on port 80, usual suspects are

1. Skype (Listens on port 80)
2. NOD32 (Add Apache to the IMON exceptions' list for it to allow apache to bind)
3. Some other antivirus (Same as above)

Way to correct it is either shutting down the program that's using the port 80 or configure it to use a different port or configure Apache to listen on a different port with the Listen directive in httpd.conf. In the case of antivirus configure the antivirus to allow Apache to bind on the port you have chosen.

Way to diagnose which app, if any, has bound to port 80 is run the netstat with those options, look for :80 next to the local IP address (second column) and find the PID (last column). Then, on the task manager you can find which process has the PID you got in the previous step. (You might need to add the PID column on the task manager)

C:\Users\vinko>netstat -ao -p tcp

Conexiones activas

  Proto  Dirección local          Dirección remota        Estado           PID
  TCP    127.0.0.1:1110         127.0.0.1:51373        TIME_WAIT       0
  TCP    127.0.0.1:1110         127.0.0.1:51379        TIME_WAIT       0
  TCP    127.0.0.1:1110         127.0.0.1:51381        ESTABLISHED     388
  TCP    127.0.0.1:1110         127.0.0.1:51382        TIME_WAIT       0
  TCP    127.0.0.1:1110         127.0.0.1:51479        TIME_WAIT       0
  TCP    127.0.0.1:1110         127.0.0.1:51481        TIME_WAIT       0
  TCP    127.0.0.1:1110         127.0.0.1:51483        TIME_WAIT       0
  TCP    127.0.0.1:1110         127.0.0.1:51485        ESTABLISHED     388
  TCP    127.0.0.1:1110         127.0.0.1:51487        TIME_WAIT       0
  TCP    127.0.0.1:1110         127.0.0.1:51489        ESTABLISHED     388
  TCP    127.0.0.1:51381        127.0.0.1:1110         ESTABLISHED     5168
  TCP    127.0.0.1:51485        127.0.0.1:1110         ESTABLISHED     5168
  TCP    127.0.0.1:51489        127.0.0.1:1110         ESTABLISHED     5168
  TCP    127.0.0.1:59264        127.0.0.1:59265        ESTABLISHED     5168
  TCP    127.0.0.1:59265        127.0.0.1:59264        ESTABLISHED     5168
  TCP    127.0.0.1:59268        127.0.0.1:59269        ESTABLISHED     5168
  TCP    127.0.0.1:59269        127.0.0.1:59268        ESTABLISHED     5168
  TCP    192.168.1.34:51278     192.168.1.33:445       ESTABLISHED     4
  TCP    192.168.1.34:51383     67.199.15.132:80       ESTABLISHED     388
  TCP    192.168.1.34:51486     66.102.9.18:80         ESTABLISHED     388
  TCP    192.168.1.34:51490     74.125.4.20:80         ESTABLISHED     388

If you want to Disable Skype from listening on port 80 and 443, you can follow the link http://www.mydigitallife.info/disable-skype-from-using-opening-and-listening-on-port-80-and-443-on-local-computer/

回答2:

I hope this helps others with this error.

Run the httpd.exe from the command line to get an accurate description of the problem.

I had the same error message and it turned out to be a miss configured ServerRoot path. Even after running setup_xampp.bat the httpd.conf had the wrong path.

My error.log was empty and starting the service does not give an informative error message.

回答3:

the better way to resolve the issue is change the port number in Apache2\conf\httpd.conf . Change the port number as fallows::: Listen 8888 and ServerName machinename:8888 .Restart the Apache server after changing the port number.

回答4:

I had the same problem. I checked netstat, other processes running, firewall and changed httpd.conf, stopped antivirus, But all my efforts were in vain. :(

So finally the solution was to stop the IIS. And it worked :)

I guess IIS and apache cant work together. If anybody know any work around let us know.

回答5:

Run the httpd.exe from the command line, as Tim mentioned. The path to PostgreSQL changed, nothing else was running on Port 80 and I didn't see anything in the error.log file.

I clone my boot drive/partition once the base is setup so I don't have to spend three days installing and retweaking everything. Turns I had reinstalled my WAPP stack and used very specific names/versions for PostgreSQL. Windows will not return a specific error message unless you run the command from the command line.

回答6:

Follow this step it will works fine. Go to Control panel-->Programs and features-->click Turn Windows features on and off--> see IIS is Checked Or Not If checked please unckeck IIS and restart the computer.After that Open services see Web Deployement Agent Service status if its started please stop.And also see WampAppache and WampSqlID if its not started please start manually. it will works for me.

回答7:

Hi i also meet this problem today. And the log error in the Event viewer is as following The Apache service named reported the following error:

1.Wrapper php-cgi.exe cannot be accessed: (720005)Access is denied.

2.apache service monitor:the requested operation has failed

It is actual the access problem.So the solution as flowing is help me change the php-cgi.exe security properties

• not inheit from parent the permission...

• please add the everyone user

回答8:

if appache and IIS both are running at a time then there is a posibility to hang the apache service,,,,

when i stopped all IIS websites once and then restarted apache service and it works for me....Jai...

回答9:

Windows Vista Home Premium operating system issue: The easiest way to resolve the issue is to change the port number in Apache2\conf\httpd.conf.

Change the port number at the following lines. 'Listen' from 80 to 8888 and 'ServerName' machinename (ex:localhost) from 80 to 8888. Save then close. Open up Apache Service Monitor and restart service or go to Computer Management > Services and locate Apache 2.2 and start or restart.

回答10:

Remove apache from Control Panel and delete the apache folder from Program Files and restart the machine, then install apache again. This will solve the problem; if not do the following: Install IIS if not installed, then start IIS and stop it ... Using services start apache service... enjoy apache.

回答11:

I've had this problem twice. The first problem was fixed using the marked answer on this page (thank you for that). However, the second time proved a bit more difficult.

I found that in my httpd-vhosts.conf file that I made a mistake when assigning the document root to a domain name. Fixing this solved my problem. It is well worth checking (or even reverting to a blank copy) your httpd-vhosts.conf file for any errors and typo's.

回答12:

if you are using windows os and believe that skype is not the suspect, then you might want to check the task manager and check the "Show processes from all users" and make sure that there is NO entry for httpd.exe. Otherwise, end its process. That solves my problem.

回答13:

Yes , i had to change the port :80 to :90 as port :80 was busy by some other system resource.

You can see the logs in the folder of Apache2.2\logs

Thanks,

回答14:

Always double check httpd.conf to see if document root is correctly pointing to an existing folder

#if you have c:\your-main-folder\www\
DocumentRoot "c:/your-main-folder/www/" 

#if you have c:\your-main-folder\www\sub-folder\
DocumentRoot "c:/your-main-folder/www/sub-folder/" 

DocumentRoot points to a folder that must exist in your drive.

回答15:

I had the same issue. when i restarted my wamp it turns to Yellow color icon but not green. In services i stop all sql server services. after that it works for me..

• Two thinks that should must be take care. 1 ) port should be different 2 ) stop those services which can be on port 80

回答16:

Thanks for the help guys. I found another culprit. Recently SimplifyMedia added a photo sharing option. Apparently it too uses port 80 and prevented Apache from starting up. I hope this helps someone out.

回答17:

Me also coming the same problem. The solution is goto add or remove programes then click the turn windows features on or off. Turn off the IIS. That is turn off the 'Internet information services' and 'Internet information service removable web core'. I chosed the remaining features are on. Computer will ask to restart the system. Restart ur computer and then install the apache http server. I got it. Server succesfully working...

回答18:

For me, this was the result of having set the document root (in httpd.conf) to a directory that did not exist (I had just emptied htdocs of a previous project).

回答19:

Windows 10 - administrator account

I needed to switch the account to an admin type account, in windows services

httpd.exe -k install

fails to add setup with enough user rights.