Find out what process registered a global hotkey?

问题:

As far as I've been able to find out, Windows doesn't offer an API function to tell what application has registered a global hotkey (via RegisterHotkey). I can only find out that a hotkey is registered if RegisterHotkey returns false, but not who "owns" the hotkey.

In the absence of a direct API, could there be a roundabout way? Windows maintains the handle associated with each registred hotkey - it's a little maddening that there should be no way of getting at this information.

Example of something that likely wouldn't work: send (simulate) a registered hotkey, then intercept the hotkey message Windows will send to the process that registered it. First, I don't think intercepting the message would reveal the destination window handle. Second, even if it were possible, it would be a bad thing to do, since sending hotkeys would trigger all sorts of potentially unwanted activity from various programs.

It's nothing critical, but I've seen frequent requests for such functionality, and have myself been a victim of applications that register hotkeys without even disclosing it anywhere in the UI or docs.

(Working in Delphi, and no more than an apprentice at WinAPI, please be kind.)

回答1:

Your question piqued my interest, so I've done a bit of digging and while, unfortunately I don't have a proper answer for you, I thought I'd share what I have.

I found this example of creating keyboard hook (in Delphi) written in 1998, but is compilable in Delphi 2007 with a couple of tweaks.

It's a DLL with a call to SetWindowsHookEx that passes through a callback function, which can then intercept key strokes: In this case, it's tinkering with them for fun, changing left cursor to right, etc. A simple app then calls the DLL and reports back its results based on a TTimer event. If you're interested I can post the Delphi 2007 based code.

It's well documented and commented and you potentially could use it as a basis of working out where a key press is going. If you could get the handle of the application that sent the key strokes, you could track it back that way. With that handle you'd be able to get the information you need quite easily.

Other apps have tried determining hotkeys by going through their Shortcuts since they can contain a Shortcut key, which is just another term for hotkey. However most applications don't tend to set this property so it might not return much. If you are interested in that route, Delphi has access to IShellLink COM interface which you could use to load a shortcut up from and get its hotkey:

uses ShlObj, ComObj, ShellAPI, ActiveX, CommCtrl;

procedure GetShellLinkHotKey;
var
  LinkFile : WideString;
  SL: IShellLink;
  PF: IPersistFile;

  HotKey : Word;
  HotKeyMod: Byte;
  HotKeyText : string;
begin
  LinkFile := 'C:\Temp\Temp.lnk';

  OleCheck(CoCreateInstance(CLSID_ShellLink, nil, CLSCTX_INPROC_SERVER, IShellLink, SL));

  // The IShellLink implementer must also support the IPersistFile
  // interface. Get an interface pointer to it.
  PF := SL as IPersistFile;

  // Load file into IPersistFile object
  OleCheck(PF.Load(PWideChar(LinkFile), STGM_READ));

  // Resolve the link by calling the Resolve interface function.
  OleCheck(SL.Resolve(0, SLR_ANY_MATCH or SLR_NO_UI));

  // Get hotkey info
  OleCheck(SL.GetHotKey(HotKey));

  // Extract the HotKey and Modifier properties.
  HotKeyText := '';
  HotKeyMod := Hi(HotKey);

  if (HotKeyMod and HOTKEYF_ALT) = HOTKEYF_ALT then
    HotKeyText := 'ALT+';
  if (HotKeyMod and HOTKEYF_CONTROL) = HOTKEYF_CONTROL then
    HotKeyText := HotKeyText + 'CTRL+';
  if (HotKeyMod and HOTKEYF_SHIFT) = HOTKEYF_SHIFT then
    HotKeyText := HotKeyText + 'SHIFT+';
  if (HotKeyMod and HOTKEYF_EXT) = HOTKEYF_EXT then
    HotKeyText := HotKeyText + 'Extended+';

  HotKeyText := HotKeyText + Char(Lo(HotKey));

  if (HotKeyText = '') or (HotKeyText = #0) then
    HotKeyText := 'None';

  ShowMessage('Shortcut Key - ' + HotKeyText);
end;

If you've got access to Safari Books Online, there is a good section about working with shortcuts / shell links in the Borland Delphi 6 Developer's Guide by Steve Teixeira and Xavier Pacheco. My example above is a butchered version from there and this site.

Hope that helps!

回答2:

One possible way is to use the Visual Studio tool Spy++.

Give this a try:

1. Run the tool (for me, it's at C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\Common7\Tools\spyxx_amd64.exe)
2. In the menu bar, select Spy -> Log messages... (or hit Ctrl + M)
3. Check All Windows in System in the Additional Windows frame
4. Switch to the Messages tab
5. Click the Clear All button
6. Select WM_HOTKEY in the listbox, or check Keyboard in Message Groups (if you're OK with more potential noise)
7. Click the OK button
8. Press the hotkey in question (Win + R, for example)
9. Select the WM_HOTKEY line in the Messages (All Windows) window, right click, and select Properties... in the context menu
10. In the Message Properties dialog, click the Window Handle link (this will be the handle for the window that received the message)
11. Click the Synchronize button on the Window Properties dialog. This will show the window in the main Spy++ window treeview.
12. On the Window Properties dialog, select the Process tab
13. Click the Process ID link. This will show you the process (In my Win + R case: EXPLORER)

回答3:

After some research, it appears that you'd need to get access to the internal structure that MS uses to store the hotkeys. ReactOS has a clean room implementation that implements the GetHotKey call by iterating an internal list and extracting the hotkey that matches the parameters to the call.

Depending on how close ReactOS' implementation is to the MS implementation, you may be able to poke around in memory to find the structure, but that's over my head...

BOOL FASTCALL
GetHotKey (UINT fsModifiers,
           UINT vk,
           struct _ETHREAD **Thread,
           HWND *hWnd,
           int *id)
{
   PHOT_KEY_ITEM HotKeyItem;

   LIST_FOR_EACH(HotKeyItem, &gHotkeyList, HOT_KEY_ITEM, ListEntry)
   {
      if (HotKeyItem->fsModifiers == fsModifiers &&
            HotKeyItem->vk == vk)
      {
         if (Thread != NULL)
            *Thread = HotKeyItem->Thread;

         if (hWnd != NULL)
            *hWnd = HotKeyItem->hWnd;

         if (id != NULL)
            *id = HotKeyItem->id;

         return TRUE;
      }
   }

   return FALSE;
}

I presume this thread on sysinternals was asked by someone related to this question, but I thought I'd link to it anyway to keep the two together. The thread looks very intriguing, but I suspect that some deep dive spelunking would need to happen to figure this out without access to the MS internals.

回答4:

Off the top of my head, you might try enumerating all windows with EnumWindows, then in the callback, send WM_GETHOTKEY to each window.

Edit: Apparrently I was wrong about that. MSDN has more information:

WM_HOTKEY is unrelated to the WM_GETHOTKEY and WM_SETHOTKEY hot keys. The WM_HOTKEY message is sent for generic hot keys while the WM_SETHOTKEY and WM_GETHOTKEY messages relate to window activation hot keys.

Note: Here is a program purporting to have the functionality you are looking for. You could try decompiling it.

回答5:

This seems to tell you a lot: http://hkcmdr.anymania.com/help.html

回答6:

Another thread mentions a global NT level keyboard hook:

Re-assign/override hotkey (Win + L) to lock windows

maybe you can get the handle of the process that called the hook that way, which you can then resolve to the process name

(disclaimer: I had it in my bookmarks, haven't really tried/tested)

回答7:

I know you can intercept the stream of messages in any window within your own process - what we used to call subclassing in VB6. (Though I do not remember the function, perhaps SetWindowLong?) I am unsure if you can do this for windows outside your own process. But for the sake of this post lets assume you find a way to do that. Then you can simply intercept the messages for all top level windows, monitor for the WM_HOTKEY message. You wouldn't be able to know all the keys right off the bat, but as they were pressed you could easily figure out what application was using them. If you persisted your results to disk and reloaded each time your monitor application was run you could increase the performance of your application over time.

回答8:

This doesn't exactly answer the part of the question that is about the Windows API, but it answers the part of the question that is about a list of global hotkeys and the applications that "own" them.

The free Hotkey Explorer at http://hkcmdr.anymania.com/ shows a list of all global hotkeys and the applications that own them. This just has helped me figure out why an application-specific shortcut key stopped working and how to fix it (by reconfiguring the registered global hotkey in the app that had it registered), within a few seconds.

回答9:

I haven't been a hard-core windows user for a few years (I switched to Mac). But I used to swear by Process Explorer to find out what process is using a particular file I was trying to delete. Maybe it help find out which process uses a hot key?