It is notoriously difficult to get any useful information on CMake as a beginner. So far, I've seen a few tutorials on how to set up some very basic project or another. However, none of these explain the reasoning behind anything that is shown in them, always leaving many holes to fill.

What does calling CMake on a CMakeLists mean? Is it supposed to be called once per build tree or what? How do I use different settings for each build if they all use the same CMakeLists from the same source? Why does each subdirectory need its own CMakeLists? Would it make sense to use CMake on a CMakeLists other than the one at the root of the project? If so, in what cases? What's the difference between specifying how to build an executable or library from the CMakeLists in their own subdirectory versus doing it in the CMakeLists at the root of all source? Can I make a project for Eclipse and another for Visual Studio just changing the -G option when calling CMake? Is that even how it's used?

None of the tutorials, documentation pages or questions/answers I've seen so far give any useful insight towards understanding how to use CMake. The examples are just not thorough. No matter what tutorials I read, I feel like I'm missing something important.

There are many questions asked by CMake newbies like me that don't ask this explicitly, but that make obvious the fact that, as newbs, they have no idea how to deal with CMake or what to make of it, so even though a question like this might seem far too broad to be allowed, I think it is worth it to leave it up and answer it.

回答1:

What is CMake for?

According to Wikipedia:

CMake is [...] software for managing the build process of software using a compiler-independent method. It is designed to support directory hierarchies and applications that depend on multiple libraries. It is used in conjunction with native build environments such as make, Apple's Xcode, and Microsoft Visual Studio.

With CMake, you no longer need to maintain separate settings specific to your compiler/build environment. You have one configuration, and that works for many environments.

CMake can generate a Microsoft Visual Studio solution, an Eclipse project or a Makefile maze from the same files without changing anything in them.

Given a bunch of directories with code in them, CMake manages all the dependencies, build orders and other tasks that your project needs done before it can be compiled. It does NOT actually compile anything. To use CMake, you must tell it (using configuration files called CMakeLists.txt) what executables you need compiled, what libraries they link to, what directories there are in your project and what is inside of them, as well as any details like flags or anything else you need (CMake is quite powerful).

If this is correctly set up, you then use CMake to create all of the files that your "native build environment" of choice needs to do its job. In Linux, by default, this means Makefiles. So once you run CMake, it will create a bunch of files for its own use plus some Makefiles. All you need to do thereafter is type "make" in console from the root folder every time you're done editing your code, and bam, a compiled and linked executable is made.

How does CMake work? What does it do?

Here is an example project setup that I will use throughout:

simple/
  CMakeLists.txt
  src/
    tutorial.cxx
    CMakeLists.txt
  lib/
    TestLib.cxx
    TestLib.h
    CMakeLists.txt
  build/

The contents of each file are shown and discussed later on.

CMake sets your project up according to the root CMakeLists.txt of your project, and does so in whatever directory you executed cmake from in the console. Doing this from a folder that isn't the root of your project produces what is called an out-of-source build, which means files created during compilation (obj files, lib files, executables, you know) will be placed in said folder, kept separate from the actual code. It helps reduce clutter and is preferred for other reasons as well, which I will not discuss.

I do not know what happens if you execute cmake on any other than the root CMakeLists.txt.

In this example, since I want it all placed inside the build/ folder, first I have to navigate there, then pass CMake the directory in which the root CMakeLists.txt resides.

cd build
cmake ..

By default, this sets everything up using Makefiles as I've said. Here is what the build folder should look like now:

simple/build/
  CMakeCache.txt
  cmake_install.cmake
  Makefile
  CMakeFiles/
    (...)
  src/
    CMakeFiles/
      (...)
    cmake_install.cmake
    Makefile
  lib/
    CMakeFiles/
      (...)
    cmake_install.cmake
    Makefile

What are all of these files? The only thing you have to worry about is the Makefile and the project folders.

Notice the src/ and lib/ folders. These have been created because simple/CMakeLists.txt points to them using the command add_subdirectory(<folder>). This command tells CMake to look in said folder for another CMakeLists.txt file and execute that script, so every subdirectory added this way must have a CMakeLists.txt file within. In this project, simple/src/CMakeLists.txt describes how to build the actual executable and simple/lib/CMakeLists.txt describes how to build the library. Every target that a CMakeLists.txt describes will be placed by default in its subdirectory within the build tree. So, after a quick

make

in console done from build/, some files are added:

simple/build/
  (...)
  lib/
    libTestLib.a
    (...)
  src/
    Tutorial
    (...)

The project is built, and the executable is ready to be executed. What do you do if you want the executables put in a specific folder? Set the appropriate CMake variable, or change the properties of a specific target. More on CMake variables later.

How do I tell CMake how to build my project?

Here are the contents, explained, of each file in the source directory:

simple/CMakeLists.txt:

cmake_minimum_required(VERSION 2.6)

project(Tutorial)

# Add all subdirectories in this project
add_subdirectory(lib)
add_subdirectory(src)

The minimum required version should always be set, according to the warning CMake throws when you don't. Use whatever your version of CMake is.

The name of your project can be used later on, and hints towards the fact you can manage more than one project from the same CMake files. I won't delve into that, though.

As mentioned before, add_subdirectory() adds a folder to the project, which means CMake expects it to have a CMakeLists.txt within, which it will then run before continuing. By the way, if you happen to have a CMake function defined you can use it from other CMakeLists.txt in subdirectories, but you have to define it before you use add_subdirectory() or it won't find it. CMake is smarter about libraries, though, so this is likely the only time you will run into this kind of problem.

simple/lib/CMakeLists.txt:

add_library(TestLib TestLib.cxx)

To make your very own library, you give it a name and then list all the files it's built from. Straightforward. If it needed another file, foo.cxx, to be compiled, you would instead write add_library(TestLib TestLib.cxx foo.cxx). This also works for files in other directories, for instance add_library(TestLib TestLib.cxx ${CMAKE_SOURCE_DIR}/foo.cxx). More on the CMAKE_SOURCE_DIR variable later.

Another thing you can do with this is specify that you want a shared library. The example: add_library(TestLib SHARED TestLib.cxx). Fear not, this is where CMake begins to make your life easier. Whether it's shared or not, now all you need to handle to use a library created in this way is the name you gave it here. The name of this library is now TestLib, and you can reference it from anywhere in the project. CMake will find it.

Is there a better way to list dependencies? Definitely yes. Check down below for more on this.

simple/lib/TestLib.cxx:

#include <stdio.h>

void test() {
  printf("testing...\n");
}

simple/lib/TestLib.h:

#ifndef TestLib
#define TestLib

void test();

#endif

simple/src/CMakeLists.txt:

# Name the executable and all resources it depends on directly
add_executable(Tutorial tutorial.cxx)

# Link to needed libraries
target_link_libraries(Tutorial TestLib)

# Tell CMake where to look for the .h files
target_include_directories(Tutorial PUBLIC ${CMAKE_SOURCE_DIR}/lib)

The command add_executable() works exactly the same as add_library(), except, of course, it will generate an executable instead. This executable can now be referenced as a target for things like target_link_libraries(). Since tutorial.cxx uses code found in the TestLib library, you point this out to CMake as shown.

Similarly, any .h files #included by any sources in add_executable() that are not in the same directory as the source have to be added somehow. If not for the target_include_directories() command, lib/TestLib.h would not be found when compiling Tutorial, so the entire lib/ folder is added to the include directories to be searched for #includes. You might also see the command include_directories() which acts in a similar fashion, except that it does not need you to specify a target since it outright sets it globally, for all executables. Once again, I'll explain CMAKE_SOURCE_DIR later.

simple/src/tutorial.cxx:

#include <stdio.h>
#include "TestLib.h"
int main (int argc, char *argv[])
{
  test();
  fprintf(stdout, "Main\n");
  return 0;
}

Notice how the "TestLib.h" file is included. No need to include the full path; CMake takes care of all that behind the scenes thanks to target_include_directories().

Technically speaking, in a simple source tree like this you can do without the CMakeLists.txts under lib/ and src/ and just adding something like add_executable(Tutorial src/tutorial.cxx) to simple/CMakeLists.txt. It's up to you and your project's needs.

What else should I know to properly use CMake?

(AKA topics relevant to your understanding)

Finding and using packages: The answer to this question explains it better than I ever could.

Declaring variables and functions, using control flow, etc.: check out this tutorial that explains the basics of what CMake has to offer, as well as being a good introduction in general.

CMake variables: there are plenty, so what follows is a crash course to get you on the right track. The CMake wiki is a good place to get more in-depth information on variables and ostensibly other things as well.

You may want to edit some variables without rebuilding the build tree. Use ccmake for this (it edits the CMakeCache.txt file). Remember to configure when done with the changes and then generate makefiles with the updated configuration.

Read the previously referenced tutorial to learn about using variables, but long story short: set(<variable name> value) to change or create a variable. ${<variable name>} to use it.

CMAKE_SOURCE_DIR: The root directory of source. In the previous example, this is always equal to /simple
CMAKE_BINARY_DIR: The root directory of the build. In the previous example, this is equals to simple/build/, but if you ran cmake simple/ from a folder such as foo/bar/etc/, then all references to CMAKE_BINARY_DIR in that build tree would become /foo/bar/etc.
CMAKE_CURRENT_SOURCE_DIR: The directory in which the current CMakeLists.txt is in. This means it changes throughout: printing this from simple/CMakeLists.txt yields /simple, and printing it from simple/src/CMakeLists.txt yields /simple/src.
CMAKE_CURRENT_BINARY_DIR: You get the idea. This path would depend not only on the folder the build is in, but also on the current CMakeLists.txt script's location.

Why are these important? Source files will obviously not be in the build tree. If you try something like target_include_directories(Tutorial PUBLIC ../lib) in the previous example, that path will be relative to the build tree, that is to say it will be like writing ${CMAKE_BINARY_DIR}/lib, which will look inside simple/build/lib/. There are no .h files in there; at most you will find libTestLib.a. You want ${CMAKE_SOURCE_DIR}/lib instead.

CMAKE_CXX_FLAGS: Flags to pass on to the compiler, in this case the C++ compiler. Also worth noting is CMAKE_CXX_FLAGS_DEBUG which will be used instead if CMAKE_BUILD_TYPE is set to DEBUG. There are more like these; check out the CMake wiki.
CMAKE_RUNTIME_OUTPUT_DIRECTORY: Tell CMake where to put all executables when built. This is a global setting. You can, for instance, set it to bin/ and have everything neatly placed there. EXECUTABLE_OUTPUT_PATH is similar, but deprecated, in case you stumble upon it.
CMAKE_LIBRARY_OUTPUT_DIRECTORY: Likewise, a global setting to tell CMake where to put all library files.

Target properties: you can set properties that affect only one target, be it an executable or a library (or an archive... you get the idea). Here is a good example of how to use it (with set_target_properties().

Is there an easy way to add sources to a target automatically? Use GLOB to list everything in a given directory under the same variable. Example syntax is FILE(GLOB <variable name> <directory>/*.cxx).

Can you specify different build types? Yes, though I'm not sure about how this works or the limitations of this. It probably requires some if/then'ning, but CMake does offer some basic support without configuring anything, like defaults for the CMAKE_CXX_FLAGS_DEBUG, for instance. You can either set your build type from within the CMakeLists.txt file via set(CMAKE_BUILD_TYPE <type>) or by calling CMake from console with the appropriate flags, for example cmake -DCMAKE_BUILD_TYPE=Debug.

Any good examples of projects that use CMake? Wikipedia has a list of open-source projects that use CMake, if you want to look into that. Online tutorials have been nothing but a letdown to me so far in this regard, however this Stack Overflow question has a pretty cool and easy-to-understand CMake setup. It's worth a look.

Using variables from CMake in your code: Here's a quick and dirty example (adapted from some other tutorial):

simple/CMakeLists.txt:

project (Tutorial)

# Setting variables
set (Tutorial_VERSION_MAJOR 1)
set (Tutorial_VERSION_MINOR 1)

# Configure_file(<input> <output>)
# Copies a file <input> to file <output> and substitutes variable values referenced in the file content.
# So you can pass some CMake variables to the source code (in this case version numbers)
configure_file (
  "${PROJECT_SOURCE_DIR}/TutorialConfig.h.in"
  "${PROJECT_SOURCE_DIR}/src/TutorialConfig.h"
)

simple/TutorialConfig.h.in:

// Configured options and settings
#define Tutorial_VERSION_MAJOR @Tutorial_VERSION_MAJOR@
#define Tutorial_VERSION_MINOR @Tutorial_VERSION_MINOR@

The resulting file generated by CMake, simple/src/TutorialConfig.h:

// Configured options and settings
#define Tutorial_VERSION_MAJOR 1
#define Tutorial_VERSION_MINOR 1

With clever use of these you can do cool things like turning off a library and such. I do recommend taking a look at that tutorial as there are some slightly more advanced things that are bound to be very useful on larger projects, sooner or later.

For everything else, Stack Overflow is brimming with specific questions and concise answers, which is great for everyone except the uninitiated.

回答2:

Here are some (hard-to-find, as everything about CMake) videos: