I have a G700 mouse connected to my computer. The problem with this mouse in Linux (Ubuntu) is that the sensitivity is very high. I also don't like mouse acceleration, so I've made a script that turns this off. The script looks like this
#!/bin/bash
# This script removes mouse acceleration, and lowers pointer speed
# Suitable for gaming mice, I use the Logitech G700.
# More info: http://www.x.org/wiki/Development/Documentation/PointerAcceleration/
xinput set-prop 11 'Device Accel Profile' -1
xinput set-prop 11 'Device Accel Constant Deceleration' 2.5
xinput set-prop 11 'Device Accel Velocity Scaling' 1.0
xinput set-prop 12 'Device Accel Profile' -1
xinput set-prop 12 'Device Accel Constant Deceleration' 2.5
xinput set-prop 12 'Device Accel Velocity Scaling' 1.0
Another problem with the G700 mouse is that it shows up as two different devices in xinput. This is most likely because the mouse has a wireless adapter, and is usually also connected via a usb cable (for charging). This is my output from xinput --list (see id 11 and 12):
$ xinput --list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=8 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=9 [slave pointer (2)]
⎜ ↳ Logitech Unifying Device. Wireless PID:4003 id=10 [slave pointer (2)]
⎜ ↳ Logitech G700 Laser Mouse id=11 [slave pointer (2)]
⎜ ↳ Logitech G700 Laser Mouse id=12 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
This isn't usually a problem, since the id's are usually the same. But sometimes the id's of the mouse change, and that's where my question comes in.
What's the simplest way of writing a script/program that finds the id that belongs to the two listings named Logitech G700 Laser Mouse in the output from xinput --list, and then running the commands in the top script using those two ids?
You can do something like the following.
if [ "$SEARCH" = "" ]; then
exit 1
fi
ids=$(xinput --list | awk -v search="$SEARCH" \
'$0 ~ search {match($0, /id=[0-9]+/);\
if (RSTART) \
print substr($0, RSTART+3, RLENGTH-3)\
}'\
)
for i in $ids
do
xinput set-prop $i 'Device Accel Profile' -1
xinput set-prop $i 'Device Accel Constant Deceleration' 2.5
xinput set-prop $i 'Device Accel Velocity Scaling' 1.0
done
So with this you first find all the IDs which match the search pattern $SEARCH and store them in $ids.
Then you loop over the IDs and execute the three xinput commands.
You should make sure that $SEARCH does not match to much, since this could result in undesired behavior.
If the device name is always the same, in this case Logitech G700 Laser Mouse, you can search for matching device IDs by running
xinput list --id-only 'Logitech G700 Laser Mouse'
My 2 cents for a Logitech Gaming Mouse G502
#!/bin/sh
for id in `xinput --list|grep 'Logitech Gaming Mouse G502'|perl -ne 'while (m/id=(\d+)/g){print "$1\n";}'`; do
# echo "setting device ID $id"
notify-send -t 50000 'Mouse fixed'
xinput set-prop $id "Device Accel Velocity Scaling" 1
xinput set-prop $id "Device Accel Constant Deceleration" 3
done
I did it like the Answer of Raphael Ahrens but used grep and sed instead of awk and The command is now something like my_script part_of_device_name part_of_property_name_(spaces with \space) value:
#!/bin/sh
DEVICE=$1
PROP=$2
VAL=$3
DEFAULT="Default"
if [ "$DEVICE" = "" ]; then
exit 1
fi
if [ "$PROP" = "" ]; then
exit 1
fi
if [ "$VAL" = "" ]; then
exit 1
fi
devlist=$(xinput --list | grep "$DEVICE" | sed -n 's/.*id=\([0-9]\+\).*/\1/p')
for dev in $devlist
do
props=$(xinput list-props $dev | grep "$PROP" | grep -v $DEFAULT | sed -n 's/.*(\([0-9]\+\)).*/\1/p')
for prop in $props
do
echo $prop
xinput set-prop $dev $prop $VAL
done
done
For the fun of it, same answer, but simpler way to parse and get ids:
for id in $(xinput list | grep 'Logitech USB Receiver' | grep pointer | cut -d '=' -f 2 | cut -f 1); do xinput --set-button-map $id 3 2 1; done
Took me a while to figure out this can get the ids:
xinput | cut -d '=' -f 2 | cut -f 1
Currently I am working on a script for a question over at askubuntu.com , which requires something similar, and I thought I'd share the simple python script that does pretty much what this question asks - find device ids and set properties:
The Script
from __future__ import print_function
import subprocess
import sys
def run_cmd(cmdlist):
""" Reusable function for running shell commands"""
try:
stdout = subprocess.check_output(cmdlist)
except subprocess.CalledProcessError as pserror:
sys.exit(1)
else:
if stdout:
return stdout.decode().strip()
def list_ids(mouse_name):
""" Returns list of ids for the same device"""
while True:
mouse_ids = []
for dev_id in run_cmd(['xinput','list','--id-only']).split('\n'):
if mouse_name in run_cmd(['xinput','list','--name-only',dev_id]):
mouse_ids.append(dev_id)
if mouse_ids:
break
return mouse_ids
"""dictionary of propery-value pairs"""
props = { 'Device Accel Profile':'-1',
'Device Accel Constant Deceleration':'2.5',
'Device Accel Velocity Scaling':'1.0' }
""" set all property-value pair per each device id
Uncomment the print function if you wish to know
which ids have been altered for double-checking
with xinput list-props"""
for dev_id in list_ids(sys.argv[1]):
# print(dev_id)
for prop,value in props.items():
run_cmd(['xinput','set-prop',dev_id,prop,value])
Usage
Provide quoted name of the mouse as first command line argument:
python set_xinput_props.py 'Logitech G700 Laser Mouse'
If everything is OK, script exits silently, with exit status of 0 , or 1 if any xinput command failed. You can uncomment print statement to show which ids are being configured (to later double check with xinput that values are set alright)
How it works:
Essentially, list_ids function lists all device ids , finds those devices that have the same name as user's mouse name and returns a list of those ids. Next we simply loop over each one of them, and of each one we set all the property-value pairs that are defined in props dictionary. Could be done with list of tuples as well, but dictionary is my choice here.
