While using OpenSSL on Windows:
openssl genrsa -out privatekey.pem 1024 -->
Created successfully
openssl req -new -x509 -key privatekey.pem -out publickey.cer -days 365
---->
Showing error message as
unable to load config info from /usr/local/ssl/openssl.cnf
After installing OpenSSL I was required to create a new environment variable:
OPENSSL_CONFC:\Program Files\OpenSSL\openssl.cnfIn powershell:
$env:OPENSSL_CONF = "${env:ProgramFiles}\OpenSSL\openssl.cnf"
This value differs from previous installation versions (as seen in a previous edit of this post). Also, don't forget to add the openssl binary folder ${env:ProgramFiles}\OpenSSL to your Path.
You should specify the absolute path to the config, something like this:
openssl req -x509 -config "C:\OpenSSL-Win64\bin\openssl.cnf" ...
In Windows 10, no need to restart nor run in Administrator's mode but instead set openssl config like so:
set OPENSSL_CONF=C:\Program Files (x86)\GnuWin32\share\openssl.cnf
Of course, if you are using GnuWin32
In windows , [Similar scenario]
I was facing the same problem But It was during requesting for Certificate Signing Request.
I did the below , It Worked for me.
Once OpenSSL installed, Ran command prompt as administrator after the system reboot.[for the best I did both.. run as admin and system reboot]
did, 1.[Error Case]
C:\OpenSSL-Win64\bin>openssl req -new -key server.key -out server.csr
WARNING: can't open config file: C:\OpenSSL-Win64\bin\openssl.cnf AND Unable to load config info from C:\OpenSSL-Win64\bin\openssl.cnf
2.[Worked with Warning]
C:\OpenSSL-Win64\bin> openssl req -new -key server.key -out server.csr -config C:\OpenSSL-Win64\bin\openssl.cfg
[Warning message]: WARNING: can't open config file: C:\OpenSSL-Win64\bin\openssl.cnf
But prompted me for the Pass Phrase for server.key It worked for me.
I referred,This link for my assistance.
Thank you.
The only thing that worked for me in this situation was the self-created openssl.cnf file.
Here are the basics needed for this exercise (edit as needed):
#
# OpenSSL configuration file.
#
# Establish working directory.
dir = .
[ ca ]
default_ca = CA_default
[ CA_default ]
serial = $dir/serial
database = $dir/certindex.txt
new_certs_dir = $dir/certs
certificate = $dir/cacert.pem
private_key = $dir/private/cakey.pem
default_days = 365
default_md = md5
preserve = no
email_in_dn = no
nameopt = default_ca
certopt = default_ca
policy = policy_match
[ policy_match ]
countryName = match
stateOrProvinceName = match
organizationName = match
organizationalUnitName = optional
commonName = supplied
emailAddress = optional
[ req ]
default_bits = 1024 # Size of keys
default_keyfile = key.pem # name of generated keys
default_md = md5 # message digest algorithm
string_mask = nombstr # permitted characters
distinguished_name = req_distinguished_name
req_extensions = v3_req
[ req_distinguished_name ]
# Variable name Prompt string
#------------------------- ----------------------------------
0.organizationName = Organization Name (company)
organizationalUnitName = Organizational Unit Name (department, division)
emailAddress = Email Address
emailAddress_max = 40
localityName = Locality Name (city, district)
stateOrProvinceName = State or Province Name (full name)
countryName = Country Name (2 letter code)
countryName_min = 2
countryName_max = 2
commonName = Common Name (hostname, IP, or your name)
commonName_max = 64
# Default values for the above, for consistency and less typing.
# Variable name Value
#------------------------ ------------------------------
0.organizationName_default = My Company
localityName_default = My Town
stateOrProvinceName_default = State or Providence
countryName_default = US
[ v3_ca ]
basicConstraints = CA:TRUE
subjectKeyIdentifier = hash
authorityKeyIdentifier = keyid:always,issuer:always
[ v3_req ]
basicConstraints = CA:FALSE
subjectKeyIdentifier = hash
I hope that helps.
After installing OpenSSL, you need to restart your computer and use Run As Administrator. Then its works.
With the GnuWin32 tools I found the openssl.cnf under C:\gnuwin32\share
set OPENSSL_CONF=C:\gnuwin32\share\openssl.cnf
For me on Windows 8, I simply found openssl.cnf file and copied it on the C drive. then:
openssl req -new -key server.key -out server.csr -config C:\openssl.cnf
Worked perfectly.
In Windows 7 I didn't have to restart, simply run command prompt in administrator mode.
In my case, I need to set the path of openssl.cnf file manually on the command using config option. So the command
openssl req -x509 -config "C:\Users\sk\Downloads\openssl-0.9.8k_X64\openssl.cnf" -newkey rsa:4096 -keyout key.pem -out cert.pem -nodes -days 900
If you're using Win32 OpenSSL v1.1.0g, setting up this environment variable:
set OPENSSL_CONF=C:\OpenSSL-Win32\bin\cnf\openssl.cnf
Before running this command with "server.key", successfully creating "server.csr":
openssl req -new -key server.key -out server.csr
On the basic question of why openssl is not found: Short answer:Some installation packages for openssl have a default openssl.cnf pre-included. Other packages do not. In the latter case you will include one from the link shown below; You can enter additional user-specifics --DN name,etc-- as needed.
From https://www.openssl.org/docs/manmaster/man5/config.html,I quote directly:
"OPENSSL LIBRARY CONFIGURATION
Applications can automatically configure certain aspects of OpenSSL using the master OpenSSL configuration file, or optionally an alternative configuration file. The openssl utility includes this functionality: any sub command uses the master OpenSSL configuration file unless an option is used in the sub command to use an alternative configuration file.
To enable library configuration the default section needs to contain an appropriate line which points to the main configuration section. The default name is openssl_conf which is used by the openssl utility. Other applications may use an alternative name such as myapplication_conf. All library configuration lines appear in the default section at the start of the configuration file.
The configuration section should consist of a set of name value pairs which contain specific module configuration information. The name represents the name of the configuration module. The meaning of the value is module specific: it may, for example, represent a further configuration section containing configuration module specific information. E.g.:"
So it appears one must self configure openssl.cnf according to your Distinguished Name (DN), along with other entries specific to your use.
Here is the template file from which you can generate openssl.cnf with your specific entries.
One Application actually has a demo installation that includes a demo .cnf file.
Additionally, if you need to programmatically access .cnf files, you can include appropriate headers --openssl/conf.h-- and parse your .cnf files using
CONF_modules_load_file(const char *filename, const char *appname,
unsigned long flags);
Here are docs for "CONF_modules_load_file";
For me put variable before calling did the trick:
OPENSSL_CONF=/usr/ssl/openssl.cnf openssl req -new -x509 -key privatekey.pem -out publickey.cer -days 365
