Have a file eg. Inventory.conf with lines like:
Int/domain—home.dir=/etc/int
I need to replace / and — before the = but not after.
Result should be:
Int_domain_home_dir=/etc/int
I have tried several sed commands but none seem to fit my need.
Sed with a t loop (BRE):
$ sed ':a;s/[-/—.]\(.*=\)/_\1/;ta;' <<< "Int/domain—home.dir=/etc/int"
Int_domain_home_dir=/etc/int
When one of the -/—. character is found, it's replaced with a _. Following text up to = is captured and output using backreference. If the previous substitution succeeds, the t command loops to label :a to check for further replacements.
Edit:
If you're under BSD/Mac OSX (thanks @mklement0):
sed -e ':a' -e 's/[-/—.]\(.*=\)/_\1/;ta'
You're asking for a sed solution, but an awk solution is simpler and performs better in this case, because you can easily split the line into 2 fields by = and then selectively apply gsub() to only the 1st field in order to replace the characters of interest:
$ awk -F= '{ gsub("[./-]", "_", $1); print $1 FS $2 }' <<< 'Int/domain-home.dir=/etc/int'
Int_domain_home_dir=/etc/int
-F= tells awk to split the input into fields by =, which with the input at hand results in $1 (1st field) containing the first half of the line, before the =, and $2 (2nd field) the 2nd half, after the =; using the -F option sets variable FS, the input field separator.
gsub("[./-]", "_", $1) globally replaces all characters in set [./-] with _ in $1 - i.e., all occurrences of either ., / or - in the 1st field are replaced with a _ each.
print $1 FS $2 prints the result: the modified 1st field ($1), followed by FS (which is =), followed by the (unmodified) 2nd field ($2).
Note that I've used ASCII char. - (HYPHEN-MINUS, codepoint 0x2d) in the awk script, even though your sample input contains the Unicode char. — (EM DASH, U+2014, UTF-8 encoding 0xe2 0x80 0x94).
If you really want to match that, simply substitute it in the command above, but note that the awk version on macOS won't handle that properly.
Another option is to use iconv with ASCII transliteration, which tranlates the em dash into a regular ASCII -:
iconv -f utf-8 -t ascii//translit <<< 'Int/domain—home.dir=/etc/int' |
awk -F= '{ gsub("[./-]", "_", $1); print $1 FS $2 }'
perl allows for an elegant solution too:
$ perl -F= -ane '$F[0] =~ tr|-/.|_|; print join("=", @F)' <<<'Int/domain-home.dir=/etc/int'
Int_domain_home_dir=/etc/int
-F=, just like with Awk, tells Perl to use = as the separator when splitting lines into fields
-ane activates field splitting (a), turns off implicit output (n), and e tells Perl that the next argument is an expression (command string) to execute.
The fields that each line is split into is stored in array @F, where $F[0] refers to the 1st field.
$F[0] =~ tr|-/.|-| translates (replaces) all occurrences of -, /, and . to _.
print join("=", @F) rebuilds the input line from the fields - with the 1st field now modified - and prints the result.
Depending on the Awk implementation used, this may actually be faster (see below).
That sed isn't the best tool for this job is also reflected in the relative performance of the solutions:
Sample timings from my macOS 10.12 machine (GNU sed 4.2.2, Mawk awk 1.3.4, perl v5.18.2, using input file file, which contains 1 million copies of the sample input line) - take them with a grain of salt, but the ratios of the numbers are of interest; fastest solutions first:
# This answer's awk answer.
# Note: Mawk is much faster here than GNU Awk and BSD Awk.
$ time awk -F= '{ gsub("[./-]", "_", $1); print $1 FS $2 }' file >/dev/null
real 0m0.657s
# This answer's perl solution:
# Note: On macOS, this outperforms the Awk solution when using either
# GNU Awk or BSD Awk.
$ time perl -F= -ane '$F[0] =~ tr|-/.|_|; print join("=", @F)' file >/dev/null
real 0m1.656s
# Sundeep's perl solution with tr///
$ time perl -pe 's#^[^=]+#$&=~tr|/.-|_|r#e' file >/dev/null
real 0m2.370s
# Sundeep's perl solution with s///
$ time perl -pe 's#^[^=]+#$&=~s|[/.-]|_|gr#e' file >/dev/null
real 0m3.540s
# Cyrus' solution.
$ time sed 'h;s/[^=]*//;x;s/=.*//;s/[/.-]/_/g;G;s/\n//' file >/dev/null
real 0m4.090s
# Kenavoz' solution.
# Note: The 3-byte UTF-8 em dash is NOT included in the char. set,
# for consistency of comparison with the other solutions.
# Interestingly, adding the em dash adds another 2 seconds or so.
$ time sed ':a;s/[-/.]\(.*=\)/_\1/;ta' file >/dev/null
real 0m9.036s
As you can see, the awk solution is fastest by far, with the line-internal-loop sed solution predictably performing worst, by a factor of about 12.
With GNU sed:
echo 'Int/domain—home.dir=/etc/int' | sed 'h;s/[^=]*//;x;s/=.*//;s/[/—.]/_/g;G;s/\n//'
Output:
Int_domain_home_dir=/etc/int
See: man sed. I assume you want to replace dots too.
If perl solution is okay:
$ echo 'Int/domain-home.dir=/etc/int' | perl -pe 's#^[^=]+#$&=~s|[/.-]|_|gr#e'
Int_domain_home_dir=/etc/int
^[^=]+ string matching from start of line up to but not including the first occurrence of =$&=~s|[/.-]|_|gr perform another substitution on matched string
/ or . or - characters with _r modifier would return the modified stringe modifier allows to use expression instead of string in replacement section# is used as delimiter to avoid having to escape / inside the character class [/.-]Also, as suggested by @mklement0, we can use translate instead of inner substitute
$ echo 'Int/domain-home.dir=/etc/int' | perl -pe 's#^[^=]+#$&=~tr|/.-|_|r#e'
Int_domain_home_dir=/etc/int
Note that I've changed sample input, - is used instead of — which is what OP seems to want based on comments
