SSL Certificate add failed when binding to port

2020-01-29 04:26发布

站内文章 / 前端开发

8 0

来，给爷笑一个

女 | 书童

私信

可以将文章内容翻译成中文,广告屏蔽插件可能会导致该功能失效(如失效，请关闭广告屏蔽插件后再试):

问题:

I created a WebService using WCF. I'm doing self hosting and I want to enable HTTPS. From my understanding for this to happen, I need to create a certificate and bind to the port that I want to use.

Here are the steps that I've done to handle this:

Created a Certificate on my local machine to act as the Root Certificate Authority
- makecert -n "CN=My Root Certificate Authority" -r -sv RootCATest.pvk RootCATest.cer
Opened MMC.exe and imported the saved .cer file into the "Trusted Root Certificate\Certificates\ folder
- makecert -sk MyKeyName -iv RootCATest.pvk -n "CN=MyMachineName" -ic RootCATest.cer -sr localmachine -ss my -sky exchange -pe MyMachineName.cer
Created a temporary service certificate from the signed Root Certificate Authority
- makecert -sk MyKeyName -iv RootCATest.pvk -n "CN=MyMachineName" -ic RootCATest.cer -sr localmachine -ss my -sky exchange -pe MyMachineName.cer
Tried to Bind the Certificate to the Port number (443 in this case)
- netsh http add sslcert ipport=0.0.0.0:443 certhash=2c5ba85bcbca412a74fece02878a44b285c63981 appid={646937c0-1042-4e81-a3b6-47d678d68ba9}

The result from step 4 is the following error:

SSL Certificate add failed, Error 1312

A specified logon session does not exist. It may already have been terminated.

Does anyone have a clue why I might be getting this error?

回答1:

I had the same error. The first time it occurred, as Micheal said, I had to move the certificate under Certificates(Local Computer) -->Personal -->Certificate folder. I had the same error when I imported the same certificate on another machine. The reason was that I was using certmgr.msc to import the certificate. . The window opened thus shows “Certificates – Current User”. Certificates imported using this window cause netsh to fail with the 1312 error. Make sure to use certificate snap-in in MMC to import certificates. The certificate snap-in from MMC shows “Certificates (Local Computer)”. This lets the netsh execution sail through.

回答2:

SSL Certificate add failed, Error 1312

A specified logon session does not exist. It may already have been terminated.

I used to have the exact same problem and spent a couple days trying to figure out what the reason was.

To make the long story short: the problem is that you have installed the certificate on the winrm server that does not have PRIVATE KEY.

I have checked this several times. You have to delete your certificate and rebuild it by using makecert for instance, as it is described perfectly here: http://blogs.technet.com/b/jhoward/archive/2005/02/02/365323.aspx

You can easily check if your certificate has private a key as so: mmc - certificates - local machine - personal. Look at the icon of the certificate - it MUST have key sign on the icon.

回答3:

I had been dealing with this issue and I'm using a self-hosted WCF service. I just made the breakthrough:

I had a certificate in the personnel folder for the Machine store. It expired and my manager issued a new one. The new one failed for me with this error. I tried a lot of stuff from Google but in the end, resolved the issue using a completely different solution.

I installed both certificates- the expired one and the newer one. Then I used this command to get a list of them:

certutil -store My

I get this output (info is fake and other certificate are not listed):

================ Certificate 1 ================
Serial Number: 6d
Issuer: E=operations@voicetrust.com, CN=VoiceTrust Server CA, OU=VoiceTrust Oper
ations, O=VoiceTrust
 NotBefore: 03-Jan-2013 3:33 PM
 NotAfter: 03-Mar-2013 3:33 PM
Subject: E=hgulzar@voicetrust.com, CN=hornet.voicetrust.com, OU=Software Develop
ment, O=VoiceTrust eServices MENA FZ LLC, L=Dubai, C=AE
Non-root Certificate
Cert Hash(sha1): 98 5f a0 d3 11 6a 4b 64 3b db 0a a4 11 66 fc 08 28 74 7e 53
  Key Container = {E5BC0912-7808-4B89-B457-31946DE5990E}
  Unique container name: dfedfcc149408fb990a3bacd6d31126b_3277b2c9-9894-46d0-9b6
4-30f0d6589239
  Provider = Microsoft Enhanced Cryptographic Provider v1.0
Private key is NOT exportable
Encryption test passed

================ Certificate 2 ================
Serial Number: 6d
Issuer: E=operations@voicetrust.com, CN=VoiceTrust Server CA, OU=VoiceTrust Oper
ations, O=VoiceTrust
 NotBefore: 03-Nov-2013 3:33 PM
 NotAfter: 03-Dec-2013 3:33 PM
Subject: E=hgulzar@voicetrust.com, CN=hornet.voicetrust.com, OU=Software Develop
ment, O=VoiceTrust eServices MENA FZ LLC, L=Dubai, C=AE
Non-root Certificate
Cert Hash(sha1): 30 5f a0 d3 11 6a 4b 64 3b db 0a a4 11 66 fc 08 28 74 7e 53
  Key Container = {E5BC0912-7808-4B89-B457-31946DE5960E}
  *Unique container name:* 55edfcc149408fb990a3bacd6d31126b_3277b2c9-9894-46d0-9b6
4-30f0d6589239
  Provider = Microsoft Enhanced Cryptographic Provider v1.0
Private key is NOT exportable
Encryption test passed

Now, everything seems OK but certificate 1 is expired and works if I try to bind it to a port whereas Certificate 2 fails with Error 1312.

The key difference that baffled me was the Unique container name property. It should be representing a physical key file on the hard drive in the %ProgramData%\Microsoft\Crypto\RSA\MachineKeys\

For Certificate 1, the file was there but for Certificate 2, there was no such file. After searching I found the file against Certificate 2 in the sub folder of %AppData%\Microsoft\Crypto\ folder. That's user specific keys not Machine level keys. It's amazing that the certificate is being imported into Computer store yet it always keeps the container key of User's store.

I deleted the '55edfcc149408fb990a3bacd6d31126b_3277b2c9-9894-46d0-9b64-30f0d6589239' file under the AppData folder and ran the repair command for my certificate 2 on the store:

certutil -repairstore My 2

This time, the Unique container name was reflecting a file in the proper folder under '%ProgramData%\Microsoft\Crypto\' and everything started working.

Hope this is helpful to someone.

回答4:

I have bought an official Thawte certificate to secure a self hosted (console application) web service over a specific port on our internet server. I then have received the Thawte certificate and installed it with mmc on our Internet server (the certificate then was viewable under „Trusted Root Certification Authorities“ (with the key icon on the image, what shows that the certificate contains a private key what is mandatory to be able to bind it to a port b.t.w.) .

Next step was to enable the <port> for https:

netsh http add urlacl url=https://+:<port>/ user=everyone

(what was no problem)

Next step was to enable the port () for https:

netsh http add sslcert ipport=0.0.0.0:<port> certhash=<thumbprint to certificate> appid={<guid to application>}

This has failed with the error message:
SSL Certificate add failed, Error: 1312 A specified logon session does not exists. It may be already have been terminated.

I then have searched the Internet and tried various suggested workaround’s (without success).

The solution for my case was to add certstorename=Root to the netsh command:

netsh http add sslcert ipport=0.0.0.0:<port *1)> certstorename=Root certhash=<thumbprint to certificate *2)> appid={<guid to application *3)>}

Notes:
If no certstorename is applied to net netsh command, netsh takes the default, what is MY (what targets the certificate store: “Personal” where self signed certificates are stored normally).
Root targets the certificate store: „Trusted Root Certification Authorities“

*1): The port, you want to use the connection
*2): You can extract the thumbprint to the certificate, if you open the certificate (on a windows system, just doubleclick the certificate in explorer) - select tab “Details” and click on “Thumbprint”. The “thumbprint” then is showed and can be copied. Copy the Thumbprint and remove all spaces...
*3): As appid you can take any ID in the form {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} as the APPID is only informative. With the command “netsh http show sslcert” you can query the bound certificates on the whole machine and the will see informative, which appid is bound to which certificate (not really helpful in practice b.t.w.) In my case, I have took the (from VS generated) GUID to my web service application

回答5:

I've been fighting error 1312 all day, what fixed it for me was to import the certificate in mmc as a .p12 file instead of a .crt. If you are creating it with OpenSSL then once you have created the .crt, do:

pkcs12 -export -in server.crt -inkey server.key -name “Your Name” -out server.p12

As described. When you go to import it in mmc it will be a called "Personal Information Exchange" file (and apparently a .pfx file would also work).

I'm new to writing servers and dealing with SSL and I have no idea why this works, but I hope it helps.

回答6:

I my case the problem was that the CER file hasn't private key attached.

I've attached PK using those OpenSSL commands:

openssl x509 -in server.der -inform DER -out server.pem -outform PEM
openssl pkcs12 -export -in server.pem -inkey serverkey.pem -out server.p12

Works for CER/DER files.

回答7:

The problem was in step 4. I was using the Thumbprint from the Root Certificate for the value in certhash. To solve this I had to go back to the MMC and refresh the Certificates(Local Computer) -->Personal -->Certificate folder. Then use the Thumbprint from the certificate that is "Issued By" the Root Certificate Authority.

回答8:

I had the same problem and solved importing the certificate using this command:

c:> certutil -importPFX certname.pfx

Now the certificate appear using this command:

c:> certutil -store my

before this command the certificate doesn't appear

回答9:

There are multiple ways of receiving this error (see above for other answers).

Another way to receive this specific error is to attempt to bind a certificate to a port when the certificate is not in the appropriate store.

Verify that the certificate is stored in the localMachine Root store (you can use certutil or certmgr.exe from command line to dump it correctly).

updated grammar :)

回答10:

This might seem obvious; however, I think it can save someone some time of head scratching. I had imported a file with .cer extension under my Personal certificates folder (for the Personal Computer account). After a while, I realized that I needed to import the file with the *.pfx extension instead. Fixed that and voilà! Problem solved!

回答11:

If:

you didn't have IIS on your machine (working with self-hosted WCF let's say), and
you made your cert request on another machine using IIS Manager (because you didn't understand that the private key comes from ciphers embedded in the cert request - and later the issued .pb7)

then:

just go install the .pb7 on the IIS machine you used to make the cert request (local machine/personal/certificates - using mmc);
export the cert from that machine, including its private key (assign password); and
install it using mmc on the WCF server (local machine/personal/certificates - using mmc).

Then, netsh will let you bind to port 443. No more 1312 errors.

回答12:

Just to throw yet another answer into the ring, this is the problem I had:

Although I imported my certificate into the (Local Computer)\... certificate store, I had imported it into the Trusted Root Certification Authorities section. I needed to import it into the Personal section, otherwise this error occurred.

回答13:

If anyone else runs into this problem and the answers in here do not clearly answer it, the underlying core problem is the private key needs to be imported. If you do not mark the certificate as exportable when you import it, the private key is not imported and you cannot bind it. If you delete it and re-import it and mark it as exportable, then it will work.

It also needs to be the local machine store as others have pointed out.

回答14:

I had exact same problem eventhough my .pfx file had private key. Adding of certificate with MMC console was successful, but adding programatically using .Net X509Store.Add(X509Certificate2) method failed every time with error 1312. Certificate even had a key sign on the icon.
After several days finaly decided to make new certificate using makecert.exe as suggested in posts here. After that everything was fine. Key appeared in %ProgramData%\Microsoft\Crypto\RSA\MachineKeys. For some reason my earlier pfx file was not compatible.

In my experience, as long as your key in not appearing in %ProgramData%\Microsoft\Crypto\RSA\MachineKeys\, binding with 'netsh http add sslcert ....' will fail.

回答15:

The certstorename argument should be the string value of the StoreName enumeration from the .net framework namespace System.Security.Cryptography.X509Certificates.

回答16:

I've being working on this for hours, and basically read through what @DoomerDGR8 said above, but my fix was a lot more simple. I ran

 C:\Windows\system32> certutil -store TRUSTEDPUBLISHER

This listed several certificates I have installed, I then ran repair store on the certificate that I was having a problem installing with netsh.

C:\Windows\system32> certutil -repairstore TRUSTEDPUBLISHER 6

The number 6 at the end represents the index of your certificate, found at in the store, hope this helps

回答17:

In my case while creating the certificate I chose a different name than My for my Cert Store name. The default name is MY. So if yours is different append certstorename=Your provided store name to the command.

回答18:

I had the same error when creating self signed certificate with OpenSSL(BouncyCastle) I resolved it with help from this post: Cannot export generated certificate with private key to byte array in .net 4.0/4.5

I had to add:

        RsaPrivateKeyStructure rsa = RsaPrivateKeyStructure.GetInstance(seq); //new RsaPrivateKeyStructure(seq);
        RsaPrivateCrtKeyParameters rsaparams = new RsaPrivateCrtKeyParameters(
            rsa.Modulus, rsa.PublicExponent, rsa.PrivateExponent, rsa.Prime1, rsa.Prime2, rsa.Exponent1, rsa.Exponent2, rsa.Coefficient);

        var rsaPriv = DotNetUtilities.ToRSA(rsaparams);

        var cspParams = new CspParameters
        {
            KeyContainerName = Guid.NewGuid().ToString(),
            KeyNumber = (int)KeyNumber.Exchange,
            Flags = CspProviderFlags.UseMachineKeyStore
        };

        var rsaPrivate = new RSACryptoServiceProvider(cspParams);**

        // Import private key from BouncyCastle's rsa
        rsaPrivate.ImportParameters(rsaPriv.ExportParameters(true));

        // Set private key on our X509Certificate2
        x509.PrivateKey = rsaPrivate;

回答19:

So to add (yet) fix/situation.

I had C# code that used BouncyCastle to create self-signed certificates.

<packages>
  <package id="BouncyCastle" version="1.8.1" targetFramework="net45" />

So my code created the certificates AND placed them in the correct locations in the Cert-Store.

Using the hints here, my install of On Premise Service Bus 1.1 was failing...and that led me here.

I ended up DELETING both certificates my BouncyCastle code had created (from the cert store) and reimporting them (with private keys)....and it all worked. I imported FIRST to the

Certificates (Local Computer) / Personal / Certificates

then I copied pasted (in the mmc) to any other places (stores) I needed them.

My "before" and "after" looked exactly the same from my eyes in MMC, BUT it fixed the issue. Go figure.

回答20:

I just had yet another error. I renewed an expired cert for our WorkFolders service from our CA using the same private key. Then I always got Error 1312. Even if Certificate Management shows I have a private key.
I could only solve the problem by re-issuing a new certificate (without the renew option). Then it worked on the first try.
Maybe this will help someone who also tried the renew option.

回答21:

In my case, i have missing the certificate private key.

回答22:

IF you imported the certificate using .NET, specific import flags must be used:

/// <summary>
/// Imports X.509 certificate from file to certificate store.
/// </summary>
/// <param name="fileName">Certificate file.</param>
/// <param name="password">Password.</param>
/// <param name="storeName">Store name.</param>
/// <param name="storeLocation">Store location.</param>
public static void ImportCertificate(string fileName, string password, StoreName storeName, StoreLocation storeLocation) {
    var keyStorageFlags =
        X509KeyStorageFlags.PersistKeySet
        | (storeLocation == StoreLocation.LocalMachine ? X509KeyStorageFlags.MachineKeySet : X509KeyStorageFlags.UserKeySet);
    var cert = new X509Certificate2(fileName, password, keyStorageFlags);
    var store = new X509Store(storeName, storeLocation);
    store.Open(OpenFlags.MaxAllowed);
    store.Add(cert);
    store.Close();
}

The ImportCertificate method is a part of the Woof.Security package created by me.

https://github.com/HTD/Woof.Security
https://www.nuget.org/packages/Woof.Security/

标签： ssl https